Perfect all works..!!
I put in winwarble macros in the line “psk startup macro “
this string <xcvrmode: usb><xcvrcommand: FEFE6EE01A0601FD>
and I load winwarbler in mode psk I have of default usb-d
Tnx beautiful job
73's Luigi
****
IV3YER
Maggi Luigi
Italian Dxlab Reflector
****
Da: dxlab@... [mailto:dxlab@...] Per conto di Dave
Bernstein
Inviato: mercoledì 29 agosto 2007 16.26
A: dxlab@...
Oggetto: Re: R: [dxlab] Commander 6.7.3 is available
You can do this now with a user-defined Command Sequence, Luigi.
Assuming your 756pro3 uses the default CI-V address of 6E,
the command to place your 756pro3 in USB mode is
FEFE6EE00601FD
and the command to enable data mode is
FEFE6EE01A0601FD
so you could construct a 2-command sequence that places your 756pro3
in USB and then enables data mode. You might also want to create a
user-defined Command Sequence that disables data mode; the command
for that is
FEFE6EE01A0600FD
The procedure for creating a User-defined Command Sequence is
described in
Its also available by clicking one of Commander's Help buttons and
navigate to the "User-defined Command Sequences" topic in the
Configuration section.
If you need more help, don't hesitate to ask...
73,
Dave, AA6YQ
--- In dxlab@... <mailto:dxlab%40yahoogroups.com> , "iv3yer"
<IV3YER@...> wrote:
Hi dave,
With icom 756pro3 in digital mode I use the key—USB.D--- that
commander he
does not have
Is possible to implement this option?
73's Luigi
****
IV3YER
Maggi Luigi
Italian Dxlab Reflector
****
Da: dxlab@... <mailto:dxlab%40yahoogroups.com>
[mailto:dxlab@... <mailto:dxlab%40yahoogroups.com> ] Per conto
di Dave
Bernstein
Inviato: mercoledì 29 agosto 2007 7.21
A: dxlab@... <mailto:dxlab%40yahoogroups.com>
Oggetto: [dxlab] Commander 6.7.3 is available
This release
- doesn't generate an errorlog.txt entry from the UpdateCWSpeed
module when changing transceiver models
- doesn't place an FT-2000 or FT-9000 into split mode when a
bandspread band button is activated (tnx to Paul N1BUG)
- implements the PKT-L button correctly for the Yaesu FT9000 and
FT2000 (tnx to Joe W4TV)
- with a Kenwood TS-2000 or TS-480, or a Flexradio SDR-1000,
doesn't
switch VFOs if you click the B button in Commander's Main window
with
VFO B active
- conforms to the current limitations of the SDR-1000's VFO
implementation (tnx to Bill W9OL and Bob K5KDN)
- supports the new Yaesu FT-450 (tnx to Joe W4TV)
- displays the Yaesu FT1000D's split mode, dual receive, and VFO
selection (tnx to Wolf, DK1FW)
- includes an S-meter file for the FT-2000 (tnx to Paul N1BUG and
Joe W4TV)
- extends the A=B function to set the B VFO mode for FT-2000 and
Omni VII (tnx to Art W2NRA and Joe W4TV)
- extends the AxB function to swap VFO modes for FTDX-9000 and FT-
2000 and Omni VII (tnx to Art W2NRA and Joe W4TV)
- alphabetizes the contents of the Radio Model selectors [except
for
MP1000 and MP1000MKV, which remain among the FT modes)
- provides RX-TX switching for the TenTec Omni VI via extended CI-V
commands (tnx to Rich W3ZJ)
Commander 6.7.3 is available via the DXLab Launcher and via
.
73,
Dave, AA6YQ
[Non-text portions of this message have been removed]
