I also did get some errors after importing as well. How do I fix that before uploading?> "Illegal - can't find country code for
callsign TO4A and TO3Z: QSO's DXCC entity is unspecified."
Typically, one would load AD1C's Big CTY file and/or Clublog's overrides
file into DXView's Overrides List *before* importing and check "enable
override checking" on DXKeeper's Import tab.
Since you have already done the import, filter the Log Page Display
for DXCCID='0' and manually update the country for TO4A (FM), TO3Z (FG)
and any other QSOs that had ambiguous prefixes.
This is a case where the developers of N1MM simply do not care about
their users. They know the DXCCID (country) but refuse to export it
in the standard ADIF format.
I imported my log from N1MM I used during the ARRL DX contest this weekend, however I'm a bit lost how to get those bulk contacts then uploaded into LOTW/QRZ/eQSL/Clublog from DxKeeper.
Is "Initial LotW Sent to 'R' for each Logged or imported QSO" checked
on QSL Config -> LotW? If so, Select the QSL Tab -> LotW and click
"Add Requested". Select the correct Station Callsign and Station
Location (they should already be set unless you use a different call
for contsting) and click "Upload to LotW"
To upload to ClubLog ... Select the QSL Tab -> ClubLog and click
the Upload to CLubLog button.
73,
... Joe, W4TV
On 2025-03-02 9:09 PM, Tim Pierce via groups.io wrote:
I imported my log from N1MM I used during the ARRL DX contest this weekend, however I'm a bit lost how to get those bulk contacts then uploaded into LOTW/QRZ/eQSL/Clublog from DxKeeper.
Outside of the contest I use the capture window and each contact I log is immediately uploaded.
I used this reference to import the log from N1MM:
I also did get some errors after importing as well. How do I fix that before uploading?
"Illegal - can't find country code for callsign TO4A and TO3Z: QSO's DXCC entity is unspecified."
Thanks,
Tim
