DXLab@groups.io | Messages

Re: Moving DXLabs

Yes that can be done but without Commander controlling the frequency and mode of your transceiver, and Winwarbler keying it I don't know what you would have to log. I suppose you could do things like prepare ARRL submissions and print out QSL labels etc. without operating your rig.

73, Rich - W3ZJ

Earl Needham wrote:

Show quoted text

Actually, you can simply move your log file to a shared folder, input the change in DXKeeper on the original machine, then install DXLabs on the "remote" machine and access your log file through your LAN. Just be sure to only use the log on one machine at a time.

7 3
Earl

Re: Cheap Disk Drives

#75250

Finally got it going, but now SpotSpy is giving me TONS of "13 Type Mismatch" errors.  Guess I'll have to try THAT mailing list for help.

   Thanks,
   Earl

-- 
KD5XB -- Earl Needham
Clovis, New Mexico DM84jk

Quoting from the Coast Guard: ZUT


Cliff Frescura wrote:

Show quoted text

Spot Spy is a DXL add on written by DL9HO, hence the German site.

 
If you have Spot Spy installed and running.

 
1.       Click on the Config button

2.       Click on the tab labeled Alarms

3.       Check the box Send E-mail (Note in the US/Canada, you probably will
never use the SMS config as is requires an SMS provider gateway)

4.       In the email config, enter your "email address" of your cell phone
to send SMS messages

a.       See  in order to
determine your email address of your cell phone in order to send SMS
messages to it.

b.      For instance if your provider is Verizon, use 1234567890@...
(replace the numbers with your 10 digit cell number)

5.       Enter the email server info like you did for your PC email client
(outlook, etc)

6.       You can set the alert triggers under the Alarms tab as well, in
addition to using the Needed Callsigns tab to enter specific calls, modes
and bands.

 
There are a bunch of other features,  but that should get you started.

 
73,

 
Cliff K3LL

 
From: dxlab@... [mailto:dxlab@...] On Behalf Of
earl_needham
Sent: Thursday, December 03, 2009 8:28 PM
To: dxlab@...
Subject: [dxlab] Re: Cheap Disk Drives

 
  
Help? Anybody? How do I get SpotSpy to send me an SMS when a station I
"need" shows up in Spot Collector?

Thanks,
Earl

--- In dxlab@... <mailto:dxlab%40yahoogroups.com> , "Earl
Needham" <earl.kd5xb@...> wrote:
  
Please tell me how to set this up in the US, last time I tried it led me
    to a German site. 
Thanks,
Earl


KD5XB -- Earl Needham

Quoting from the Coast Guard: ZUT
Posted via Blackberry

-----Original Message-----
From: "Cliff Frescura" <cf@...>
Date: Thu, 3 Dec 2009 10:29:47 To: <dxlab@... <mailto:dxlab%40yahoogroups.com> >
Subject: RE: [dxlab] Cheap Disk Drives

Spot Spy nicely complements this "multi-tasking" approach as well. Just
carry your cell phone around the house with you and receive SC alerts and
special callsign notifications on your mobile phone.



73,



Cliff K3LL



From: dxlab@... <mailto:dxlab%40yahoogroups.com>
    [mailto:dxlab@... <mailto:dxlab%40yahoogroups.com> ] On Behalf
Of
  
Peter Laws
Sent: Thursday, December 03, 2009 8:32 AM
To: dxlab@... <mailto:dxlab%40yahoogroups.com> Subject: Re: [dxlab] Cheap Disk Drives





On Thu, Dec 3, 2009 at 10:15, Rich - W3ZJ <rich@...
<mailto:rich%40w3zj.com> > wrote:

    
advertisements. If you don't have one you must be wrathing TV the old
fashioned way on their schedule instead of yours :-)
      
How do you use it with DXLabs?

        Well not with DXLab but in addition to it. You start watching a movie
but leave SpotCollector running in the background. When an interesting
spot comes in, you pause the movie, work the DX then go back to your
movie :-)
      That's what I do. Joe DX tells me when I need to go down the hall to
N5UWY to work something. :-)

Yes, priorities. One of my priorities is to limit my TeeVee watching
to stuff I like, when *I* want to watch it. I sort of knew that in
pre-DVR days, but tape management was always a hassle with the VCR.
Now my problem is that I tend to let content accumulate on the DVR
without watching it.

It's changed my viewing habits so much that if a new show catches my
interest, I have to ask if I am ready to commit to watching the new
content given what else I watch. More often than not, I say "nah".
Just said "yes" to Dr Who, though that is delivered by DVD/USPS; I
don't have the right setup to stream it directly from Netflix (their
postal distribution system works great though).

"Net net", as they say, is that we watch a lot less TeeVee. Not what
the conduit and content providers had in mind, I'm sure. :-)

But back to DXLabs. Storage is sort of a big-picture kind of topic,
but it *is* part of running DXLabs, I assure you. Understanding what
is available and potentially, what to avoid, is important.

Peter

-- 
Peter Laws | N5UWY | plaws plaws net | Travel by Train!
    

Re-printing envelopes

#75249

While printing envelopes for QSLs the printer hiccupped a few times and DXKeeper thinks it has printed envelopes that haven't actually been printed.  

I know DXK keeps track of what it has printed.  How do I get DXK to reprint certain envelopes.

73,
Mark N3GNW

Re: Moving DXLabs

#75248

How about just reinstalling DXL into c:&#92;DXLab as suggested in

and

This would probably overcome the network sharing security issues that you
are currently experiencing.

73,

Cliff K3LL

From: dxlab@... [mailto:dxlab@...] On Behalf Of Phil
& Anne Irons
Sent: Saturday, December 05, 2009 10:54 AM
To: dxlab@...
Subject: Re: [dxlab] Moving DXLabs

Rich - W3ZJ wrote:

You should be able to access the DXLab files from another computer on
your network just by shearing the "DXLab Suite" folder. However, keep in
mind that no matter where the programs are located on your shack
computer you will not be able to execute the applications successfully
on your remote computer. If you want to use DXLab from a remote computer
leave the programs right where they are and use Remote Desktop or
TightVNC to control your shack computer from anywhere. TightVNC is a
free download but I find that Remote Desktop works much better.
Unfortunately, in order for your sack computer to host a remote desktop
session you will need to install XP Professional on that machine.
Microsoft does not include the Remote Desktop server in the home
version. That holds true for Vista and Windows 7 as well.

73, Rich - W3ZJ
Rich,

Thanks for your comments. The main reason I want to move the DXLabs 
folder is that I originally installed it in the Windows Program Files 
folder, which, although you can go through the motions of sharing it on 
the network, does not allow ANY sharing from another network user. I do 
have a program called LogMeIn on the shack computer, which allows 
access, but it's cumbersome, and the screen image, particularly on a 
laptop, is not great. Essentially, I plan on installing another copy of 
DXL on my laptop, and just using the databases--but they are in Program 
files! Catch 22, I guess. I wonder if I could get away with just 
moving all the databases, and re-directing the DXL sub-programs...?

73,

Phil/VE1BVD

Re: Moving DXLabs

#75247

Actually, you can simply move your log file to a shared folder, input the change in DXKeeper on the original machine, then install DXLabs on the "remote" machine and access your log file through your LAN. Just be sure to only use the log on one machine at a time. 

7 3
Earl


KD5XB -- Earl Needham

Quoting from the Coast Guard: ZUT
Posted via Blackberry

Show quoted text

-----Original Message-----
From: Phil & Anne Irons <irons@...>
Date: Sat, 05 Dec 2009 14:54:23 
To: <dxlab@...>
Subject: Re: [dxlab] Moving DXLabs

Rich - W3ZJ wrote:

You should be able to access the DXLab files from another computer on
your network just by shearing the "DXLab Suite" folder. However, keep in
mind that no matter where the programs are located on your shack
computer you will not be able to execute the applications successfully
on your remote computer. If you want to use DXLab from a remote computer
leave the programs right where they are and use Remote Desktop or
TightVNC to control your shack computer from anywhere. TightVNC is a
free download but I find that Remote Desktop works much better.
Unfortunately, in order for your sack computer to host a remote desktop
session you will need to install XP Professional on that machine.
Microsoft does not include the Remote Desktop server in the home
version. That holds true for Vista and Windows 7 as well.

73, Rich - W3ZJ
Rich,

Thanks for your comments.  The main reason I want to move the DXLabs 
folder is that I originally installed it in the Windows Program Files 
folder, which, although you can go through the motions of sharing it on 
the network, does not allow ANY sharing from another network user.  I do 
have a program called LogMeIn on the shack computer, which allows 
access, but it's cumbersome, and the screen image, particularly on a 
laptop, is not great.  Essentially, I plan on installing another copy of 
DXL on my laptop, and just using the databases--but they are in Program 
files!  Catch 22, I guess.  I wonder if I could get away with just 
moving all the databases, and re-directing the DXL sub-programs...?

73,

Phil/VE1BVD

LoTW user list 05/12/2009

i6kzr

#75246

Hi Dave,
I have just uploaded an updated LoTW user list database, now it is at 05/12/2009.

                        73,

                                     Renzo I6KZR

MITTO TIBI NAVEM PRORA PUPPIQUE CARENTEM

Re: Another FLDIGI question

#75245

In the downloaded zip file there is either a readme file or a help file that
describes setting it up.

73 Rick N2AMG

Show quoted text

-----Original Message-----
From: dxlab@... [mailto:dxlab@...] On Behalf Of
George Steube
Sent: Saturday, December 05, 2009 12:20 PM
To: dxlab@...
Subject: RE: [dxlab] Another FLDIGI question

Rick,
I was looking for the FLDIGI setup info on your site but I could only find
the downloads.  I think Dave's site mentions setup instructions for FLDIGI
but his instructions are very general.  Can you send me a link.
Thanks
George
  -----Original Message-----
  From: dxlab@... [mailto:dxlab@...]On Behalf Of
Rick Ellison
  Sent: Saturday, December 05, 2009 10:19 AM
  To: dxlab@...
  Subject: RE: [dxlab] Another FLDIGI question



  George..
  Try adjusting the settings on the rigCat tab. It sounds like something is
  timing out before the radio initializes. Your other choice is to use radio
  control from Commander and let it send the information over to Fldigi..

  73 Rick N2AMG

  -----Original Message-----
  From: dxlab@... [mailto:dxlab@...] On Behalf Of
  George Steube
  Sent: Saturday, December 05, 2009 10:02 AM
  To: dxlab@...
  Subject: RE: [dxlab] Another FLDIGI question

  I don't see a PTT diamond in the Rig Cat. I have the "CAT control for PTT"
  checked. The program works, but I get this error on startup.
  George
  W2GS

  -----Original Message-----
  From: dxlab@... [mailto:dxlab@...]On Behalf Of
  Andy obrien
  Sent: Saturday, December 05, 2009 8:35 AM
  To: dxlab@...
  Subject: Re: [dxlab] Another FLDIGI question

  Do you have the "PTT" diamond selected in the RIG CAT area within Fldigi ?

  On Sat, Dec 5, 2009 at 9:11 AM, at6c <at6c@...> wrote:

  >
  >
  > Dave,
  > Trying to setup FLDIGI bridge software. Everything load without a
problem,
  > I changed the digital program in SC, but I get the following error:
  > "rigCat_getfreq: failed pre data string set@0". FLDIGI follows the rig
  > frequency without a problem. Suggestions?
  > Thanks,
  > George
  > W2GS
  >
  >
  >

  

  ------------------------------------

  Yahoo! Groups Links

  ------------------------------------

  Yahoo! Groups Links



  






------------------------------------

Yahoo! Groups Links

Re: Moving DXLabs

Phil & Anne Irons

#75244

Rich - W3ZJ wrote:
 You should be able to access the DXLab files from another computer on
your network just by shearing the "DXLab Suite" folder. However, keep in
mind that no matter where the programs are located on your shack
computer you will not be able to execute the applications successfully
on your remote computer. If you want to use DXLab from a remote computer
leave the programs right where they are and use Remote Desktop or
TightVNC to control your shack computer from anywhere. TightVNC is a
free download but I find that Remote Desktop works much better.
Unfortunately, in order for your sack computer to host a remote desktop
session you will need to install XP Professional on that machine.
Microsoft does not include the Remote Desktop server in the home
version. That holds true for Vista and Windows 7 as well.
73, Rich - W3ZJ
Rich,

Thanks for your comments.  The main reason I want to move the DXLabs folder is that I originally installed it in the Windows Program Files folder, which, although you can go through the motions of sharing it on the network, does not allow ANY sharing from another network user.  I do have a program called LogMeIn on the shack computer, which allows access, but it's cumbersome, and the screen image, particularly on a laptop, is not great.  Essentially, I plan on installing another copy of DXL on my laptop, and just using the databases--but they are in Program files!  Catch 22, I guess.  I wonder if I could get away with just moving all the databases, and re-directing the DXL sub-programs...?

73,

Phil/VE1BVD

Re: Moving DXLabs

#75243

You should be able to access the DXLab files from another computer on your network just by shearing the "DXLab Suite" folder. However, keep in mind that no matter where the programs are located on your shack computer you will not be able to execute the applications successfully on your remote computer. If you want to use DXLab from a remote computer leave the programs right where they are and use Remote Desktop or TightVNC to control your shack computer from anywhere. TightVNC is a free download but I find that Remote Desktop works much better. Unfortunately, in order for your sack computer to host a remote desktop session  you will need to install XP Professional on that machine. Microsoft does not include the Remote Desktop server in the home version. That holds true for Vista and Windows 7 as well.

73, Rich - W3ZJ

Phil & Anne Irons wrote:

Show quoted text

Hi Dave...

I want to move the DXLabs folder from within the Program Files folder on
my shack computer, so that I can access it from elsewhere on my network.
  Can you please give me a step by step?  A friend suggested copying the
entire folder to another location on the network, then uninstalling from
Program Files, and re-installing at the root level, then copying the
contents of the copied folder, to ensure that all databases, etc are
intact.  However, I recall that someone had problems with .ini files
recently, and I'm sure there are others.

My operating system is XP Home, SP3.  Everything else is working fine.

thanks in advance,

Phil/VE1BVD
Sydney, NS

Re: Another FLDIGI question

#75242

Rick,
I was looking for the FLDIGI setup info on your site but I could only find
the downloads.  I think Dave's site mentions setup instructions for FLDIGI
but his instructions are very general.  Can you send me a link.
Thanks
George

Show quoted text

-----Original Message-----
  From: dxlab@... [mailto:dxlab@...]On Behalf Of
Rick Ellison
  Sent: Saturday, December 05, 2009 10:19 AM
  To: dxlab@...
  Subject: RE: [dxlab] Another FLDIGI question

  George..
  Try adjusting the settings on the rigCat tab. It sounds like something is
  timing out before the radio initializes. Your other choice is to use radio
  control from Commander and let it send the information over to Fldigi..

  73 Rick N2AMG

  -----Original Message-----
  From: dxlab@... [mailto:dxlab@...] On Behalf Of
  George Steube
  Sent: Saturday, December 05, 2009 10:02 AM
  To: dxlab@...
  Subject: RE: [dxlab] Another FLDIGI question

  I don't see a PTT diamond in the Rig Cat. I have the "CAT control for PTT"
  checked. The program works, but I get this error on startup.
  George
  W2GS

  -----Original Message-----
  From: dxlab@... [mailto:dxlab@...]On Behalf Of
  Andy obrien
  Sent: Saturday, December 05, 2009 8:35 AM
  To: dxlab@...
  Subject: Re: [dxlab] Another FLDIGI question

  Do you have the "PTT" diamond selected in the RIG CAT area within Fldigi ?

  On Sat, Dec 5, 2009 at 9:11 AM, at6c <at6c@...> wrote:

  >
  >
  > Dave,
  > Trying to setup FLDIGI bridge software. Everything load without a
problem,
  > I changed the digital program in SC, but I get the following error:
  > "rigCat_getfreq: failed pre data string set@0". FLDIGI follows the rig
  > frequency without a problem. Suggestions?
  > Thanks,
  > George
  > W2GS
  >
  >
  >

  ------------------------------------

  Yahoo! Groups Links

  ------------------------------------

  Yahoo! Groups Links

Moving DXLabs

Phil & Anne Irons

#75241

Hi Dave...

I want to move the DXLabs folder from within the Program Files folder on my shack computer, so that I can access it from elsewhere on my network. Can you please give me a step by step?  A friend suggested copying the entire folder to another location on the network, then uninstalling from Program Files, and re-installing at the root level, then copying the contents of the copied folder, to ensure that all databases, etc are intact.  However, I recall that someone had problems with .ini files recently, and I'm sure there are others.

My operating system is XP Home, SP3.  Everything else is working fine.

thanks in advance,

Phil/VE1BVD
Sydney, NS

Re: Another FLDIGI question

#75240

George..
 Try adjusting the settings on the rigCat tab. It sounds like something is
timing out before the radio initializes. Your other choice is to use radio
control from Commander and let it send the information over to Fldigi..

73 Rick N2AMG

Show quoted text

-----Original Message-----
From: dxlab@... [mailto:dxlab@...] On Behalf Of
George Steube
Sent: Saturday, December 05, 2009 10:02 AM
To: dxlab@...
Subject: RE: [dxlab] Another FLDIGI question

I don't see a PTT diamond in the Rig Cat.  I have the "CAT control for PTT"
checked.  The program works, but I get this error on startup.
George
W2GS

-----Original Message-----
From: dxlab@... [mailto:dxlab@...]On Behalf Of
Andy obrien
Sent: Saturday, December 05, 2009 8:35 AM
To: dxlab@...
Subject: Re: [dxlab] Another FLDIGI question

Do you have the "PTT" diamond selected in the RIG CAT area within Fldigi ?

On Sat, Dec 5, 2009 at 9:11 AM, at6c <at6c@...> wrote:

Dave,
Trying to setup FLDIGI bridge software. Everything load without a problem,
I changed the digital program in SC, but I get the following error:
"rigCat_getfreq: failed pre data string set@0". FLDIGI follows the rig
frequency without a problem. Suggestions?
Thanks,
George
W2GS

------------------------------------

Yahoo! Groups Links

------------------------------------

Yahoo! Groups Links

Re: FLDIGI

#75239

Hey Andy,
I didn't believe that changing the date in the computer would work, but it
did!!.  I changed the date to the day after the cert was issued in August of
this year and it work FB.  This system needs work.
Thanks again.
George
W2GS

Show quoted text

-----Original Message-----
  From: dxlab@... [mailto:dxlab@...]On Behalf Of
George Steube
  Sent: Saturday, December 05, 2009 9:02 AM
  To: dxlab@...
  Subject: RE: [dxlab] FLDIGI



  Andy,
  Thanks. This cert is only three months old. I will try your trick and see
  what happens.
  George
  W2GS

  -----Original Message-----
  From: dxlab@... [mailto:dxlab@...]On Behalf Of
  Andy obrien
  Sent: Saturday, December 05, 2009 8:40 AM
  To: dxlab@...
  Subject: Re: [dxlab] FLDIGI

  ARRL has had a major problem with expired certificates, looks like the
  glitch has not been solved . To fix this issue for me, I changed the date
  on my PC and then did a certificate update, all works fine now , even
after
  switching back tot he correct date.

  Andy K3UK

  On Sat, Dec 5, 2009 at 8:36 AM, George Steube <at6c@...> wrote:

  >
  >
  > Joe,
  > Thanks for the help, but I am having a problem with removing the
password.
  > When I get to step 5 and enter the original password, I get the an error
  > message saying the certificate is expired. I checked the certificate and
  it
  > is good unitl 2012. Any suggestions.
  > George
  > W2GS
  >
  > -----Original Message-----
  > From: dxlab@... <dxlab%40yahoogroups.com> [mailto:
  > dxlab@... <dxlab%40yahoogroups.com>]On Behalf Of Joe
  > Subich, W4TV
  > Sent: Friday, December 04, 2009 1:44 PM
  > To: dxlab@... <dxlab%40yahoogroups.com>
  > Subject: RE: [dxlab] FLDIGI
  >
  > George,
  >
  > The fldigi to DXLab Bridge is available from N2AMG:
  > The update or full version can be downloaded from 
  >
  > > Also while I am here how do you get rid of the
  > > password requirement for LOTW?
  >
  > Information on removing a password from the LotW certificate can
  > be found in the DXLab WiKi section on LotW:
  > 
  >
  > 73,
  >
  > ... Joe, W4TV
  >
  > > -----Original Message-----
  > > From: dxlab@... <dxlab%40yahoogroups.com> [mailto:
  > dxlab@... <dxlab%40yahoogroups.com>] On
  > > Behalf Of at6c
  > > Sent: Friday, December 04, 2009 10:51 AM
  > > To: dxlab@... <dxlab%40yahoogroups.com>
  > > Subject: [dxlab] FLDIGI
  > >
  > >
  > > Dave, is there bridge software so that FLDIGI can be used
  > > with DXLab? Also while I am here how do you get rid of the
  > > password requirement for LOTW? Thanks, George W2GS
  > >
  > >
  > >
  > > ------------------------------------
  > >
  > > Yahoo! Groups Links
  > >
  > >
  > >
  >
  > [Non-text portions of this message have been removed]
  >
  >
  >



  ------------------------------------

  Yahoo! Groups Links






[Non-text portions of this message have been removed]

Re: FLDIGI

#75237

Andy,
Thanks.  This cert is only three months old.  I will try your trick and see
what happens.
George
W2GS

Show quoted text

-----Original Message-----
From: dxlab@... [mailto:dxlab@...]On Behalf Of
Andy obrien
Sent: Saturday, December 05, 2009 8:40 AM
To: dxlab@...
Subject: Re: [dxlab] FLDIGI

ARRL has had a major problem with expired certificates, looks like the
glitch has not been solved .  To fix this issue for me, I changed the date
on my PC and then did a certificate  update, all works fine now , even after
switching back tot he correct date.

Andy K3UK

On Sat, Dec 5, 2009 at 8:36 AM, George Steube <at6c@...> wrote:

Joe,
Thanks for the help, but I am having a problem with removing the password.
When I get to step 5 and enter the original password, I get the an error
message saying the certificate is expired. I checked the certificate andit
is good unitl 2012. Any suggestions.
George
W2GS

-----Original Message-----
From: dxlab@... <dxlab%40yahoogroups.com> [mailto:
dxlab@... <dxlab%40yahoogroups.com>]On Behalf Of Joe
Subich, W4TV
Sent: Friday, December 04, 2009 1:44 PM
To: dxlab@... <dxlab%40yahoogroups.com>
Subject: RE: [dxlab] FLDIGI

George,

The fldigi to DXLab Bridge is available from N2AMG:
The update or full version can be downloaded from 

Also while I am here how do you get rid of the
password requirement for LOTW?Information on removing a password from the LotW certificate can
be found in the DXLab WiKi section on LotW:

73,

... Joe, W4TV

-----Original Message-----
From: dxlab@... <dxlab%40yahoogroups.com> [mailto:dxlab@... <dxlab%40yahoogroups.com>] On
Behalf Of at6c
Sent: Friday, December 04, 2009 10:51 AM
To: dxlab@... <dxlab%40yahoogroups.com>
Subject: [dxlab] FLDIGI

Dave, is there bridge software so that FLDIGI can be used
with DXLab? Also while I am here how do you get rid of the
password requirement for LOTW? Thanks, George W2GS

------------------------------------

Yahoo! Groups Links

------------------------------------

Yahoo! Groups Links

Re: Another FLDIGI question

#75238

I don't see a PTT diamond in the Rig Cat.  I have the "CAT control for PTT"
checked.  The program works, but I get this error on startup.
George
W2GS

Show quoted text

-----Original Message-----
From: dxlab@... [mailto:dxlab@...]On Behalf Of
Andy obrien
Sent: Saturday, December 05, 2009 8:35 AM
To: dxlab@...
Subject: Re: [dxlab] Another FLDIGI question

Do you have the "PTT" diamond selected in the RIG CAT area within Fldigi ?

On Sat, Dec 5, 2009 at 9:11 AM, at6c <at6c@...> wrote:

Dave,
Trying to setup FLDIGI bridge software. Everything load without a problem,
I changed the digital program in SC, but I get the following error:
"rigCat_getfreq: failed pre data string set@0". FLDIGI follows the rig
frequency without a problem. Suggestions?
Thanks,
George
W2GS

------------------------------------

Yahoo! Groups Links

Re: FLDIGI

#75236

No, I just tried any upload and it accepted the password and uploaded the
data.
George
W2GS

Show quoted text

-----Original Message-----
  From: dxlab@... [mailto:dxlab@...]On Behalf Of Joe
Subich, W4TV
  Sent: Saturday, December 05, 2009 8:42 AM
  To: dxlab@...
  Subject: RE: [dxlab] FLDIGI




  > When I get to step 5 and enter the original password, I get
  > the an error message saying the certificate is expired.

  Do you get the same error when attempting to use the certificate
  to sign an upload? If so, contact LotW support at ARRL. There
  has been a problem of "false expirations" in some cases.

  73,

  ... Joe, W4TV


  > -----Original Message-----
  > From: dxlab@... [mailto:dxlab@...] On
  > Behalf Of George Steube
  > Sent: Saturday, December 05, 2009 8:37 AM
  > To: dxlab@...
  > Subject: RE: [dxlab] FLDIGI
  >
  >
  > Joe,
  > Thanks for the help, but I am having a problem with removing
  > the password. When I get to step 5 and enter the original
  > password, I get the an error message saying the certificate
  > is expired. I checked the certificate and it is good unitl
  > 2012. Any suggestions. George W2GS
  > -----Original Message-----
  > From: dxlab@...
  > [mailto:dxlab@...]On Behalf Of Joe Subich, W4TV
  > Sent: Friday, December 04, 2009 1:44 PM
  > To: dxlab@...
  > Subject: RE: [dxlab] FLDIGI
  >
  >
  >
  >
  > George,
  >
  > The fldigi to DXLab Bridge is available from N2AMG:
  > The update or full version can be downloaded from
  > 
  >
  > > Also while I am here how do you get rid of the
  > > password requirement for LOTW?
  >
  > Information on removing a password from the LotW certificate can
  > be found in the DXLab WiKi section on LotW:
  > 
  >
  > 73,
  >
  > ... Joe, W4TV
  >
  >
  > > -----Original Message-----
  > > From: dxlab@... [mailto:dxlab@...] On
  > > Behalf Of at6c
  > > Sent: Friday, December 04, 2009 10:51 AM
  > > To: dxlab@...
  > > Subject: [dxlab] FLDIGI
  > >
  > >
  > > Dave, is there bridge software so that FLDIGI can be used
  > > with DXLab? Also while I am here how do you get rid of the
  > > password requirement for LOTW? Thanks, George W2GS
  > >
  > >
  > >
  > > ------------------------------------
  > >
  > > Yahoo! Groups Links
  > >
  > >
  > >
  >
  >
  >
  >
  >
  >
  >
  >
  >
  >
  > ------------------------------------
  >
  > Yahoo! Groups Links
  >
  >
  >

Re: FLDIGI

#75235

When I get to step 5 and enter the original password, I get 
the an error message saying the certificate is expired.Do you get the same error when attempting to use the certificate 
to sign an upload?  If so, contact LotW support at ARRL.  There 
has been a problem of "false expirations" in some cases. 

73, 

   ... Joe, W4TV 
 


-----Original Message-----
From: dxlab@... [mailto:dxlab@...] On 
Behalf Of George Steube
Sent: Saturday, December 05, 2009 8:37 AM
To: dxlab@...
Subject: RE: [dxlab] FLDIGI


Joe,
Thanks for the help, but I am having a problem with removing 
the password. When I get to step 5 and enter the original 
password, I get the an error message saying the certificate 
is expired.  I checked the certificate and it is good unitl 
2012.  Any suggestions. George W2GS
  -----Original Message-----
  From: dxlab@... 
[mailto:dxlab@...]On Behalf Of Joe Subich, W4TV
  Sent: Friday, December 04, 2009 1:44 PM
  To: dxlab@...
  Subject: RE: [dxlab] FLDIGI




  George,

  The fldigi to DXLab Bridge is available from N2AMG:
  The update or full version can be downloaded from 


  > Also while I am here how do you get rid of the
  > password requirement for LOTW?

  Information on removing a password from the LotW certificate can
  be found in the DXLab WiKi section on LotW:
  

  73,

  ... Joe, W4TV


  > -----Original Message-----
  > From: dxlab@... [mailto:dxlab@...] On
  > Behalf Of at6c
  > Sent: Friday, December 04, 2009 10:51 AM
  > To: dxlab@...
  > Subject: [dxlab] FLDIGI
  >
  >
  > Dave, is there bridge software so that FLDIGI can be used
  > with DXLab? Also while I am here how do you get rid of the
  > password requirement for LOTW? Thanks, George W2GS
  >
  >
  >
  > ------------------------------------
  >
  > Yahoo! Groups Links
  >
  >
  >



  






------------------------------------

Yahoo! Groups Links

Re: FLDIGI

#75234

ARRL has had a major problem with expired certificates, looks like the
glitch has not been solved .  To fix this issue for me, I changed the date
on my PC and then did a certificate  update, all works fine now , even after
switching back tot he correct date.

Andy K3UK

On Sat, Dec 5, 2009 at 8:36 AM, George Steube <at6c@...> wrote:



Joe,
Thanks for the help, but I am having a problem with removing the password.
When I get to step 5 and enter the original password, I get the an error
message saying the certificate is expired. I checked the certificate and it
is good unitl 2012. Any suggestions.
George
W2GS

-----Original Message-----
From: dxlab@... <dxlab%40yahoogroups.com> [mailto:
dxlab@... <dxlab%40yahoogroups.com>]On Behalf Of Joe
Subich, W4TV
Sent: Friday, December 04, 2009 1:44 PM
To: dxlab@... <dxlab%40yahoogroups.com>
Subject: RE: [dxlab] FLDIGI

George,

The fldigi to DXLab Bridge is available from N2AMG:
The update or full version can be downloaded from 

Also while I am here how do you get rid of the
password requirement for LOTW?Information on removing a password from the LotW certificate can
be found in the DXLab WiKi section on LotW:


73,

... Joe, W4TV

-----Original Message-----
From: dxlab@... <dxlab%40yahoogroups.com> [mailto:dxlab@... <dxlab%40yahoogroups.com>] On
Behalf Of at6c
Sent: Friday, December 04, 2009 10:51 AM
To: dxlab@... <dxlab%40yahoogroups.com>
Subject: [dxlab] FLDIGI


Dave, is there bridge software so that FLDIGI can be used
with DXLab? Also while I am here how do you get rid of the
password requirement for LOTW? Thanks, George W2GS



------------------------------------

Yahoo! Groups Links






[Non-text portions of this message have been removed]

Re: Another FLDIGI question

#75233

Do you have the "PTT" diamond selected in the RIG CAT area within Fldigi ?

Show quoted text

On Sat, Dec 5, 2009 at 9:11 AM, at6c <at6c@...> wrote:



Dave,
Trying to setup FLDIGI bridge software. Everything load without a problem,
I changed the digital program in SC, but I get the following error:
"rigCat_getfreq: failed pre data string set@0". FLDIGI follows the rig
frequency without a problem. Suggestions?
Thanks,
George
W2GS

 

Another FLDIGI question

#75232

Dave,
Trying to setup FLDIGI bridge software.  Everything load without a problem, I changed the digital program in SC, but I get the following error: "rigCat_getfreq: failed pre data string set@0".  FLDIGI follows the rig frequency without a problem.  Suggestions?
Thanks,
George
W2GS

开云体育