开云体育

ctrl + shift + ? for shortcuts
© 2025 开云体育
  1. DXLab
  2. Messages
Expanded Topics Messages Polls
Date
Re: Logging on DZ lab through JTAlert

 

开云体育

Two things to check:

?

Firstly ensure that in WSJTX? the Secondary UDP? Server is not active (File -> Settings -> Reporting? -? bottom block

?

Secondly under JTAlert settings ensure that under Logging you have not changed the Last QSO ADIF port to one in the DXKeeper range – try disabling “Enable transmission of last QSO” (default port is 2333, which is outside of DXKeeper listening range)

?

73 de BARRY MURRELL ZS2EZ

KF26ta - Port Elizabeth, South Africa

EPC#0558?DMC#1690? 30MDG#4081

DXCC HONOR ROLL (334/340)

website :

?

From: [email protected] <[email protected]> On Behalf Of Crispo, Alexander W via groups.io
Sent: Friday, 21 March 2025 02:49
To: [email protected]
Subject: [DXLab] Logging on DZ lab through JTAlert

?

When I finish a QSO on ft8 and log it, JTAlert sends that log file to my DXKeeper log file. ?Exactly what I want. ?Then when I send my response and send my response and power, when I hit ok a second file gets sent to my DXkeeper log file. ?I have to delete one each time a log a new contact. ?How do I stop that?

?

Al. KA9OUT
Re: Logging on DZ lab through JTAlert

 

On 2025-03-20 8:48 PM, Crispo, Alexander W via groups.io wrote:

Then when I send my response and send my response and power, when I hit ok a second file gets sent to my DXkeeper log file.
What does this mean? Once you have received 73 or RR73 the QSO is
complete and WSJTX/JT Alert prompts you to log the QSO. Anything
after than is unnecessary - if you are prompted to log again just
close the log window without clicking OK.

73,

... Joe, W4TV

On 2025-03-20 8:48 PM, Crispo, Alexander W via groups.io wrote:
When I finish a QSO on ft8 and log it, JTAlert sends that log file to my DXKeeper log file. ?Exactly what I want. ?Then when I send my response and send my response and power, when I hit ok a second file gets sent to my DXkeeper log file. ?I have to delete one each time a log a new contact. ?How do I stop that?
Al. KA9OUT
Re: Logging on DZ lab through JTAlert

 

+ AA6YQ comments below
When I finish a QSO on ft8 and log it, JTAlert sends that log file to my DXKeeper log file. ?Exactly what I want. ?Then when I send my response and send my response and power, when I hit ok a second file gets sent to my DXkeeper log file. ?I have to delete one each time a log a new contact. ?How do I stop that?
+ That's most likely a JTAlert configuration issue. I suggest that you review the step-by-step instructions in



+ If those instructions don't enable you to stop the double-logging and? JTAlert developer Laurie VK3AMA hasn't yet respond here - which he typically does - you can post your question on the JTAlert support forum:



? ? ? 73,

? ? ? ? ? ?Dave AA^YHQ
Logging on DZ lab through JTAlert

 

When I finish a QSO on ft8 and log it, JTAlert sends that log file to my DXKeeper log file. ?Exactly what I want. ?Then when I send my response and send my response and power, when I hit ok a second file gets sent to my DXkeeper log file. ?I have to delete one each time a log a new contact. ?How do I stop that?
?
Al. KA9OUT
Re: Band Edge Warnings: Commander

 

+ AA6YQ comments below
Related question: Is it possible to have an audible band edge warning in addition to the visual/color change?
+ In support of visually-impaired operators, the "Transceiver Announcements" panel on the Audio tab of SpotCollector's Configuration window can be configured to announce frequency changes and mode changes.

+ For operators who are not visually-impaired, why would an audible band edge warning be needed when a visual indication is provided in Commander's Main and Bandspread windows?

? ? ?73,

? ? ? ? ? Dave, AA6YQ?
Re: Band Edge Warnings: Commander

 

Related question: Is it possible to have an audible band edge warning in addition to the visual/color change?
?
--
73, Norm/KC1BMD
Re: LoTW status error?

 

开云体育

Thank you very much sir! I also prefer your first recommendation.

73 de Dave, W5SV

On Mar 20, 2025, at 18:52, Dave AA6YQ via groups.io <aa6yq@...> wrote:

?
+ AA6YQ comments below
You *CAN NOT* eliminate the error since you removed the questionable
QSO from DXKeeper. LotW does not allow users to remove QSOs once
uploaded.
+ You can eliminate the error in one of two ways:

1. Restore the QSO to your log so that it will "match" what LoTW reports when you invoke "Update from LoTW"; if the QSO didn't actually happen, set its "QSL Rcvd" item to 'I' so that it won't be considered for award progress.

+ or

2. Uncheck the "Report unmatched QSOs and QSLs as errors" on the "QSL Configuration" window's LoTW.

+ I recommend #1 so that you can keep "Report unmatched QSOs and QSLs as errors" checked

? ? ? ?73,

? ? ? ? ? ? Dave, AA6YQ
Re: LoTW status error?

 

+ AA6YQ comments below
You *CAN NOT* eliminate the error since you removed the questionable
QSO from DXKeeper. LotW does not allow users to remove QSOs once
uploaded.
+ You can eliminate the error in one of two ways:

1. Restore the QSO to your log so that it will "match" what LoTW reports when you invoke "Update from LoTW"; if the QSO didn't actually happen, set its "QSL Rcvd" item to 'I' so that it won't be considered for award progress.

+ or

2. Uncheck the "Report unmatched QSOs and QSLs as errors" on the "QSL Configuration" window's LoTW.

+ I recommend #1 so that you can keep "Report unmatched QSOs and QSLs as errors" checked

? ? ? ?73,

? ? ? ? ? ? Dave, AA6YQ
Re: Populating maps with log data?

 

+ AA6YQ comments below
Thank You, Dave.? I knew it had to be there, but just had not found it yet.? Lots to read and understand!? Grin.
+ As suggested here



+ slowly scan the Reference Documentation of each DXLab applications that you are using. Ignore the details, just create a list of those "functions" that you're interested in understanding and potentially using. Then pursue each of those functions one at a time, consulting the Reference Documentation for details and the "goal-oriented documentation" for step-by-step instructions; searching its index with a few key words is a good way to locate what you're seeking:



+ You can always ask for help here. No one will criticize you for asking a question that has already been asked and answered, or whose answer is obvious somewhere in the documentation.

? ? ? ? 73,

? ? ? ? ? ? ? Dave, AA6YQ
Re: LoTW status error?

 

On 2025-03-20 7:24 PM, David Reed via groups.io wrote:

What do I need to do to eliminate that error? I assume somehow remove
it from LoTW, but how?
You *CAN NOT* eliminate the error since you removed the questionable
QSO from DXKeeper. LotW does not allow users to remove QSOs once
uploaded.

73,

... Joe, W4TV


On 2025-03-20 7:24 PM, David Reed via groups.io wrote:
Somehow, if there was a reply, I missed it; any clues r things I might try would be appreciated!
On 3/18/2025 10:16 PM, David Reed via groups.io wrote:

I received the following resposnse from LoTW after giving it a *Sync LoTW QSOs button* press:

??????? Date????? Time?????????? Call Band????????? Mode Submode?????? Station Call??? Result

? 2025-03-18? 02:42:06????????? 6Y7EI???? 80M FT8???????????????????????????? W5SV??? Error: no matching QSO in log

LotW Sync QSLs: 1 QSL processed, 0 log entries updated, 1 error
I checked the log, and that QSO was in doubt, and I had confirmed a QSO with that station about 7 hours later, so I deleted the corresponding entry in DXKeeper.

However, I still get the same error now.

What do I need to do to eliminate that error? I assume somehow remove it from LoTW, but how?

Thanks in advance & 73 de Dave, W5SV
Re: LoTW status error?

 

+ AA6YQ comments below
Somehow, if there was a reply, I missed it; any clues r things I might try would be appreciated!
+ My response is here:

/g/DXLab/message/228410

? ? ?73,

? ? ? ? ?Dave, AA6YQ
Re: LoTW status error?

 

开云体育

Somehow, if there was a reply, I missed it; any clues r things I might try would be appreciated!

On 3/18/2025 10:16 PM, David Reed via groups.io wrote:

I received the following resposnse from LoTW after giving it a Sync LoTW QSOs button press:

??????? Date????? Time?????????? Call??? Band????????? Mode?????? Submode?????? Station Call??? Result

? 2025-03-18? 02:42:06????????? 6Y7EI???? 80M?????????? FT8???????????????????????????? W5SV??? Error: no matching QSO in log

LotW Sync QSLs: 1 QSL processed, 0 log entries updated, 1 error

I checked the log, and that QSO was in doubt, and I had confirmed a QSO with that station about 7 hours later, so I deleted the corresponding entry in DXKeeper.

However, I still get the same error now.

What do I need to do to eliminate that error? I assume somehow remove it from LoTW, but how?

Thanks in advance & 73 de Dave, W5SV
Re: Populating maps with log data?

 

Thank You, Dave.? I knew it had to be there, but just had not found it yet.? Lots to read and understand!? Grin.

Rich, NU6T

On Thu, Mar 20, 2025 at 3:09?PM Dave AA6YQ via <aa6yq=[email protected]> wrote:
+ AA6YQ comments below
Is there a way to populate one of the DXLab maps with log records?? I am wondering whether worked or confirmed DXCC entities or zones can be illustrated on associated maps.? I have DX Atlas.
+ Yes. See



+ and



+ and



? ? ?73,

? ? ? ? ? Dave, AA6YQ



--
Richard Hill
Re: IC-PW1 configuration in DXLabCommander

 

+ AA6YQ comments below
I'm sorry.
I did not know that [email protected] could not send attachments.
+ No problem, Shige!
?
PC(DXLabCommander):USB A port?[USB cable]?IC-7600:USB B port
PC(DXLabCommander):USB A port?CT-18(interface)?[REMOTE cable]?IC-PW1:Remote socket
IC-7600:ACC-2 socket?[ACC cable]?IC-PW1:ACC-1 socket
?
Does this tell you the status of the connection between my radio and my PC?
The PC, IC-7600, and IC-PW1 are connected like this.
In this state, IC-PW1 cannot be controlled well
+ That configuration is not supported because it does not prevent the PW1 from encountering CI-V bus collisions, which can mangle frequency packets and cause the PW1 to transmit on an unexpected frequency.? Dave W6DE will help you establish the correct connectivity and configure Commander appropriately.

? ? ? ?73,

? ? ? ? ? ?Dave, AA6YQ
Re: IC-PW1 configuration in DXLabCommander

 

开云体育

?Joe, W6TV, Dave AA6YQ, and Dave, W6DE

I'm sorry.
I did not know that [email protected] could not send attachments.

PC(DXLabCommander):USB A port?[USB cable]?IC-7600:USB B port
PC(DXLabCommander):USB A port?CT-18(interface)?[REMOTE cable]?IC-PW1:Remote socket
IC-7600:ACC-2 socket?[ACC cable]?IC-PW1:ACC-1 socket

Does this tell you the status of the connection between my radio and my PC?
The PC, IC-7600, and IC-PW1 are connected like this.
In this state, IC-PW1 cannot be controlled well.

Shige, JJ1BCM
Re: IC-PW1 configuration in DXLabCommander

 

开云体育

I am taking this discussion off line.? I will post a summary if this discussion works out.

?

73,

Dave, w6de

?

From: [email protected] <[email protected]> On Behalf Of Dave w6de via groups.io
Sent: 20 March, 2025 19:07
To: [email protected]
Subject: Re: [DXLab] IC-PW1 configuration in DXLabCommander

?

As noted by Joe, W6TV, Dave AA6YQ, and myself W6DE, you can not share a single CIV connection with both a 7600 and a PW1 on that single CIV connection.?

Dave, AA6YQ is telling you the PW1 does not behave properly on a CIV connection and you need a separate CIV connection to only the PW1 from your computer to your PW1 to properly handle the bad behavior from the PW1.

?

73,

Dave, w6de

?

From: [email protected] <[email protected]> On Behalf Of Shigeru Ohsawa via groups.io
Sent: 20 March, 2025 09:17
To: [email protected]
Subject: Re: [DXLab] IC-PW1 configuration in DXLabCommander

?

Dave, W6DE

?

As shown in the attached figure, the PC is connected to the IC-7600 and the IC-PW1.
I cannot control IC-PW1 well in this condition.

?

Shige, JJ1BCM

?

差出人:?[email protected] <[email protected]> が Dave w6de via groups.io <w6de@...> の代理で送信
送信日时:?2025年3月20日 8:44
宛先:?[email protected] <[email protected]>
件名:?Re: [DXLab] IC-PW1 configuration in DXLabCommander

?

You will need a second CIV connection path for DXLab Commander running in the computer to communicate with the PW1.? Do you have a second CT-18 or other way to connect your computer to the PW1??

See the connection diagram in this article.

?

73,

Dave, w6de

?

From:?[email protected] <[email protected]> On Behalf Of ji8bxb.jj1bcm.shige via groups.io
Sent:?19 March, 2025 23:07
To:?[email protected]
Subject:?Re: [DXLab] IC-PW1 configuration in DXLabCommander

?

Thank you, Dave.

?

>Leave the PW1 address at 71 and the 7600 address at 7A.

IC-PW1 address at 74(DXLab's “Controlling an Icom PW1 Amplifier” instructs to set the address of IC-PW1 to 74.).

IC-7600 address at 7A.

?

>With the accessory cable and CIV cables directly connected between the PW1 and the 7600 can you successfully Sync the PW1 and 7600 together?

IC-7600 controls IC-PW1 perfectly.

?

Shige, JJ1BCM

?
Re: Populating maps with log data?

 

+ AA6YQ comments below
Is there a way to populate one of the DXLab maps with log records?? I am wondering whether worked or confirmed DXCC entities or zones can be illustrated on associated maps.? I have DX Atlas.
+ Yes. See



+ and



+ and



? ? ?73,

? ? ? ? ? Dave, AA6YQ
Populating maps with log data?

 

Is there a way to populate one of the DXLab maps with log records?? I am wondering whether worked or confirmed DXCC entities or zones can be illustrated on associated maps.? I have DX Atlas.

Thanks??
Rich, NU6T
Re: My last 12 OSO's would not upload to Lotw

 

# more AA6YQ comments below
It was the propagation window.? Somehow internet was in that window.? I must have done that but did not realize it.? Anyway all is well now.

?+ The error message " Invalid prop mode (internet) on line 5 " came from TQSL when it was processing the QSOs that DXKeeper directed it to submit to LoTW - not from DXKeeper. Thus there is no errorlog.txt file in your DXKeeper folder.
?
There is no such thing as an "Internet" QSO as far as logbook is concerned.? However, IRLP and Echolink are allowed. Go figure.
?

# ADIF defines an INTERNET propagation mode:

http://adif.org.uk/ADIF_Current#Propagation_Mode_Enumeration


# This choice is available in DXKeeper's "Propagation Mode" selector. It could also be selected in an imported QSO.

????? 73,

??????????? Dave AA6YQ
Re: IC-PW1 configuration in DXLabCommander

 

开云体育

As noted by Joe, W6TV, Dave AA6YQ, and myself W6DE, you can not share a single CIV connection with both a 7600 and a PW1 on that single CIV connection.?

Dave, AA6YQ is telling you the PW1 does not behave properly on a CIV connection and you need a separate CIV connection to only the PW1 from your computer to your PW1 to properly handle the bad behavior from the PW1.

?

73,

Dave, w6de

?

From: [email protected] <[email protected]> On Behalf Of Shigeru Ohsawa via groups.io
Sent: 20 March, 2025 09:17
To: [email protected]
Subject: Re: [DXLab] IC-PW1 configuration in DXLabCommander

?

Dave, W6DE

?

As shown in the attached figure, the PC is connected to the IC-7600 and the IC-PW1.
I cannot control IC-PW1 well in this condition.

?

Shige, JJ1BCM

?

差出人:?[email protected] <[email protected]> が Dave w6de via groups.io <w6de@...> の代理で送信
送信日时:?2025年3月20日 8:44
宛先:?[email protected] <[email protected]>
件名:?Re: [DXLab] IC-PW1 configuration in DXLabCommander

?

You will need a second CIV connection path for DXLab Commander running in the computer to communicate with the PW1.? Do you have a second CT-18 or other way to connect your computer to the PW1??

See the connection diagram in this article.

?

73,

Dave, w6de

?

From:?[email protected] <[email protected]> On Behalf Of ji8bxb.jj1bcm.shige via groups.io
Sent:?19 March, 2025 23:07
To:?[email protected]
Subject:?Re: [DXLab] IC-PW1 configuration in DXLabCommander

?

Thank you, Dave.

?

>Leave the PW1 address at 71 and the 7600 address at 7A.

IC-PW1 address at 74(DXLab's “Controlling an Icom PW1 Amplifier” instructs to set the address of IC-PW1 to 74.).

IC-7600 address at 7A.

?

>With the accessory cable and CIV cables directly connected between the PW1 and the 7600 can you successfully Sync the PW1 and 7600 together?

IC-7600 controls IC-PW1 perfectly.

?

Shige, JJ1BCM

?
201 - 220 of 228446