开云体育

The only COM port that matters is the virtual COM port that is created when you connect your computer to your 7300. If Commander is able to control your 7300’s frequency and mode, then it is

Dave, Sorry about that. I had changed the settings back where everything works except the Spectrum Waterfall. I have two comports #6 @ 19200 radio cable and #7 @ 115200 comport that was downloaded

+ AA6YQ comments below Does DXKeeper use the data from https://lotw.arrl.org/lotw-help/developer-query-dxcc-credits for anything? That data seems like it has all the manually-processed QSL cards, not

Dave, Does DXKeeper use the data from?https://lotw.arrl.org/lotw-help/developer-query-dxcc-credits for anything?? That data seems like it has all the manually-processed QSL cards, not LoTW in it.

Bill, 1:?? You can log to DXKeeper, and it will log to the HRDlog.net since its an online logbook 2.?? It will log to QRZ .. you need to be a paid subscriber to QRZ and have a API Key 3.?

What version is the latest? When we selected HRDLog.net after selecting DXKeeper it would unselect DXKeeper. Also couldn’t find where to select QRZ.com. Thank you and 73, Bill KO4NR

The errorlog you sent me shows that you have Commander's Primary CAT port baud rate set to 19,200, which is incorrect. Please review steps 1a and 1b in

+ AA6YQ Thanks for the second reply. Followed the instructions but no go. I must be miss reading the instructions. + Please do the following 1. on the General tab of Commander's Configuration window,

+ AA6YQ comments below I have been reading about JT-Alert as well as playing around with it and have come to these conclusions. Am I correct? 1. You can log QSOs from JT-Alert to DXKeeper or

1. Wrong. JTAlert can log to DXKeeper and HRDLog.net simultaneously as well as several other online logs (but not LoTW). 2. Wrong. JTAlert can upload QSOs to QRZ.com BTW it is JTAlert not JT-Alert

Dave, Thanks for the second reply. Followed the instructions but no go. I must be miss reading the instructions. I am going to just use DXLab without the Spectrum Waterfall for now and in the near

I have been reading about JT-Alert as well as playing around with it and have come to these conclusions. ?Am I correct? 1. ?You can log QSOs from JT-Alert to DXKeeper or HRDLog.net but not both. 2.

+ AA6YQ comments below I am using Windows 10, IC-7300 and DXLab. Also using two cables connected to the IC-7300. 1. USB RTS01 Radio Cable Com 6 19200 (My primary Cat Port.) 2. Silicon Labs CP210x USB

I am using Windows 10, IC-7300 and DXLab. Also using two cables connected to the IC-7300. 1. USB RTS01 Radio Cable Com 6 19200 (My primary Cat Port.) 2. Silicon Labs CP210x USB to UART Bridge Com 7

...via the Databases tab of DXView's Configuration window. Translation database version 1.1.6 includes improvements to the Swedish translations contributed by Bj?rn SM7IUN. Thanks, Bj?rn! Not

Thanks I found it... Julio

Regarding your question " Where is DXK > Credits >"AutoLink in DXlabs? This DXLabs wiki page explains the process: http://www.dxlabsuite.com/dxlabwiki/AutoLinkDXCCCredits Dave, w6de

I'm missing something. Where is DXK > Credits > AutoLink in DXlabs? Julio, W4HY

My apologies Dave. I think I was specifying Path Finder and should have said DXView Rod

+ AA6YQ comments below Think I understand it now - In DXV the box under the SP Heading is the heading of the last heading. As soon as I click on the SP Heading box to turn my rotor, then they agree