+ AA6YQ comments below

I ended to code an alternative to JT alert which is named "Wait and Pounce".?



While I read the doc there I don't understand yet how to handle and what to send to Commander

?

My main goal to make it simple, is to send message to Commander to set a new QRG to my TX. Is that possible? If so how should I format my UDP message?

+ The UDP protocol does not guarantee delivery. You can direct Commander to QSY via messages conveyed via TCP, as described here:



+ A general introduction to enabling applications to interoperate with DXLab is available here:

https://www.dxlabsuite.com/Interoperation.htm

? ? ? ?73,

+ AA6YQ comments below

I've been away and finally got to importing 2400 WPX SSB Q's into DXkeeper.? After import I did lotw "add requested" and then 2566 Q's were recorded as sent to lotw.? approx 58000 Q's in the log.

?

Then I noticed something that I've never used or seen before that DXkeeper "filter" box was set to show only lotw confirmed.?

+ Are you referring to the Filter panel at the bottom of the Main window's "Log QSOs" tab? This panel displays the current Log Page Display filter in its caption, e.g.

Filter: Call=VK9NS

?

+ What caption was displayed in the Filter panle.

I have no idea how the filter got set, but I had updated to the latest sw and databases prior to starting the importing of the adif. ? Sure enough all Q's after 1/16/2025 were not shown in DXkeeper.? After 2/8/2025 I had also imported roughly 1000 Q's from WPX RTTY and sent those to lotw.? After a bit of searching for how to turn of the "lotw confirmed" filter, I cleared it with no change in DXkeeper displayed log (still ended 1/16/2025)? CTRL plus X clear made no change.? Both adif's were imported from N1MM contest logs.

+ To remove all filtering from DXKeeper's Log Page Display and sort it in chronological order, depress the CTRL key while clicking the Filter panel's X button.

+ Now that you can see all QSOs in the Log Page Display in the order they were made, are you still missing QSOs?

? ? ? ? ?73,

? ? ? ? ? ? ? ?Dave, AA6YQ

+ AA6YQ comments below

Hello

?

I ended to code an alternative to JT alert which is named "Wait and Pounce".?



While I read the doc there I don't understand yet how to handle and what to send to Commander

?

My main goal to make it simple, is to send message to Commander to set a new QRG to my TX. Is that possible? If so how should I format my UDP message? Thanks for your help

Cédric, F5UKW

I've been away and finally got to importing 2400 WPX SSB Q's into DXkeeper.? After import I did lotw "add requested" and then 2566 Q's were recorded as sent to lotw.? approx 58000 Q's in the log.

?

Then I noticed something that I've never used or seen before that DXkeeper "filter" box was set to show only lotw confirmed.? I have no idea how the filter got set, but I had updated to the latest sw and databases prior to starting the importing of the adif. ? Sure enough all Q's after 1/16/2025 were not shown in DXkeeper.? After 2/8/2025 I had also imported roughly 1000 Q's from WPX RTTY and sent those to lotw.? After a bit of searching for how to turn of the "lotw confirmed" filter, I cleared it with no change in DXkeeper displayed log (still ended 1/16/2025)? CTRL plus X clear made no change.? Both adif's were imported from N1MM contest logs.

?

Trying BAK log files also had no change, all after 1/16/2025 were missing.? I suspect 1/16/2025 the last lotw upload btw.

?

So I'm stuck in not seeing several thousand Q's which were uploaded to lotw but invisible to DXkeeper.?

?

How do I fix this??

?

Hypothesis:? DXkeeper got stuck in displaying only lotw confirmed Q's when I imported the WPX SSB adif with the filter set.? Clearing the filter now doesn't work.

?

Grant KZ1W

Is there a way to set the prefix for TX9A in SpotCollector? Since it shows unknown it will not flag the appropriate needed color, nor will it email me an alert.

?

Thanks

73,

Tim N9PN

+ AA6YQ comments below

Today I worked TX9A in FT-8

everthing was logged in wsjtx adif file, where also 5 other qso, which where imported to dxkeeper already, are in.

Usually the other 5 qsos are skipped, not so in this case, when the last one is "illegal" he imports the 5? and the illegal one?

+ On the Main window's "Import QSOs" tab, how do you have the "Duplicate checking" panel configured?

? ? ?73,

? ? ? ? ? ?Dave, AA6YQ

Today I worked TX9A in FT-8

everthing was logged in wsjtx adif file, where also 5 other qso, which where imported to dxkeeper already, are in.

Usually the other 5 qsos are skipped, not so in this case, when the last one is "illegal" he imports the 5? and the illegal one?

?

?

?

?

?

73 Alex, OE3JTB

?

Gentlemen?

Thank you all for the help, much appreciated and my log has been corrected.

73 Paul w2eck

It doesnt give the Main window. It go directly at config . The exe properties it display 16.1.0.0 of 12/03/2025.

There is no need to highlight anything. After backing up the log, filter the log display so that it contains only QSOs you want to delete, then ctrl+click on the "Delete" button above the log display pane to delete all of the QSOs in the filtered log display. Note that this includes all QSOs displayable using the scroll bar at the right, not just those currently visible on your screen; if you don't filter the log first, ctrl+clicking on the "Delete" button will delete your entire log.

?

73,

Rich VE3KI

?

?

On Sat, Apr 26, 2025 at 09:30 AM, w2eck wrote:

After you have filtered the log, control-click the delete button. It should delete the selected range of QSOs.

?

Tom?

I already have done that, but I don't want to have to delete then one at a time, I want to be able to highlight the range I have selected and delete all at once. I have seen mentioned in the archives, just don't know how to do

73 Paul w2ecl

Backup up your log before you do this.

I want delete a date range of records. How do I highlight a range of records?

?

Tnc

Paul w2eck

They don't show any version in the top. It display 'Commander Configuration'

The date of the Radios.txt is 28/12/2024 17h.44