Change QSO in bulk-Another question
I have read the instructions and used them before to change QSO's in bulk ie QTH, but for some reason I can't seem to figure out how to change LOTW and eQSL from "N" to a blank. ?I did get QSL changed using the drop down menu in MOD, but the others are not listed in the drop down. ?Above the section with the drop down for MOD there is a place that has four spaces for Caption title and syntax (I think that is what it was) where you can save it to use again. ?I placed them in there and saved it as A-Index, but it didn't change the QSO's. ?
I know I am missing something simple. ?Sorry Dave for my ignorance.
TIA,
Walt ~ WB7UOF
|
Re: IC-PW1 configuration in DXLabCommander
+ AA6YQ comments below
I have tried changing the USB port that connects the CI-V interface of the IC-PW1 to the PC, or changing the interface cable. it seems that the IC-PW1 becomes controllable in more cases, but not 100% controllable.
+ That should not be the case. Whether the root cause lies in your PW1, or your computer, or the USB port (if it is external to your computer), I cannot say. ? ? ? 73, ? ? ? ? ? ? ? ?Dave, AA6YQ ? ? ? ??
|
Re: IC-PW1 configuration in DXLabCommander
Dave, AA6YQ
?
I have not yet received a response from ICOM, but I am beginning to understand the conditions when IC-PW1 becomes uncontrollable.
?
1, I have tried changing the USB port that connects the CI-V interface of the IC-PW1 to the PC, or changing the interface cable. it seems that the IC-PW1 becomes controllable in more cases, but not 100% controllable.
2, When IC-PW1 is powered off for a long time (for example, when it is powered on for the first time that day), DXLabCommander is unable to control IC-PW1 even if it is powered on. However, after that, when the power is turned on and off several times, the PW1 alert lights up and the IC-PW1 becomes controllable, and after that, the IC-PW1 remains controllable even if the power is turned on and off repeatedly.
3, Whether DXLabCommander can or cannot control IC-PW1 is determined when power is supplied to IC-PW1 by turning on the IC-7600 power supply, or when IC-PW1's POWER switch is turned on, in other words, when power for IC-PW1 control is turned on. 4, Once IC-PW1 is powered on, the power switch of IC-PW1 is turned on.
4, Once the IC-PW1 is in a controllable state and the power is turned on, it will remain so until the power is turned off. However, once the power is turned off, it is not known whether the IC-PW1 will be in a controllable state (PW1 alert lights up) the next time the power is turned on.
5, This phenomenon appears when DXLabCommander is used, but not when IC-7600 and IC-PW1 are directly connected. Also, I had previously connected IC-PW1 and SteppIR with IC-7600 and CI-V interface (improved version of CT-17) and IC-PW1 was controllable.
?
I wish I had a clue how to solve this problem, but this is what I can confirm now.
?
Shige, JJ1BCM
|
Re: SpotCollector Special Callsigns won't load
+ AA6YQ comments below
When I direct SpotCollector to load a special callsign file in .txt format, it appears to do so, showing that the file is being
loaded, but the resulting list is empty. The file is in the same format I used on the computer with my previous DXLab installation,
and the options are the same.
There are no column headings (Callsign, Tag List, Expires), and I am unable to enter any text in the last row (the one with an * in
the first column).
+ So that I can see what's going on, please attach your special callsign file to an email message, and send it to me via
aa6yq (at) ambersoft.com
73,
Dave, AA6YQ
|
Re: SpotCollector Special Callsigns won't load
Thanks, Joe, but no change.
Jim N7US
toggle quoted message
Show quoted text
-----Original Message----- From: [email protected] < [email protected]> On Behalf Of Joe Subich, W4TV via groups.io Sent: Monday, March 17, 2025 16:14 To: [email protected]Subject: Re: [DXLab] SpotCollector Special Callsigns won't load On 2025-03-17 4:34 PM, Jim N7US wrote: When I direct SpotCollector to load a special callsign file in .txt
format, it appears to do so, showing that the file is being loaded,
but the resulting list is empty. Try clearing (Clear button) the existing empty list first. There are no column headings (Callsign, Tag List, Expires), and I am
unable to enter any text in the last row (the one with an * in the
first column). Double click on a cell in the last row to create a new blank line and enter data there. 73, ... Joe, W4TV On 2025-03-17 4:34 PM, Jim N7US wrote: When I direct SpotCollector to load a special callsign file in .txt format, it appears to do so, showing that the file is being loaded, but the resulting list is empty. The file is in the same format I used on the computer with my previous DXLab installation, and the options are the same.
There are no column headings (Callsign, Tag List, Expires), and I am unable to enter any text in the last row (the one with an * in the first column).
Jim N7US
|
Re: SpotCollector Special Callsigns won't load
On 2025-03-17 4:34 PM, Jim N7US wrote: When I direct SpotCollector to load a special callsign file in .txt format, it appears to do so, showing that the file is being loaded, but the resulting list is empty. Try clearing (Clear button) the existing empty list first. There are no column headings (Callsign, Tag List, Expires), and I am unable to enter any text in the last row (the one with an * in the
first column). Double click on a cell in the last row to create a new blank line and enter data there. 73, ... Joe, W4TV On 2025-03-17 4:34 PM, Jim N7US wrote: When I direct SpotCollector to load a special callsign file in .txt format, it appears to do so, showing that the file is being loaded, but the resulting list is empty. The file is in the same format I used on the computer with my previous DXLab installation, and the options are the same.
There are no column headings (Callsign, Tag List, Expires), and I am unable to enter any text in the last row (the one with an * in the first column).
Jim N7US
|
SpotCollector Special Callsigns won't load
When I direct SpotCollector to load a special callsign file in .txt format, it appears to do so, showing that the file is being loaded, but the resulting list is empty.? The file is in the same
format I used on the computer with my previous DXLab installation, and the options are the same.
?
There are no column headings (Callsign, Tag List, Expires), and I am unable to enter any text in the last row (the one with an * in the first column).
?
Jim N7US
?
|
Thanks Rich and Dave.
Joe WB9SBD
On 3/17/2025 1:22 PM, Dave AA6YQ wrote:
toggle quoted message
Show quoted text
+ AA6YQ comments below
Club Log Live Stream
+ Yes, that appears to do exactly what was requested, and
DXKeeper supports it!
? ? ? 73,
? ? ? ? ? ? Dave, AA6YQ
|
+ AA6YQ comments below
Club Log Live Stream
+ Yes, that appears to do exactly what was requested, and DXKeeper supports it! ? ? ? 73, ? ? ? ? ? ? Dave, AA6YQ
|
Club Log Live Stream
?
73,
Rich VE3KI
?
On Mon, Mar 17, 2025 at 01:53 PM, Dave AA6YQ wrote:
+ AA6YQ comments below
Can DXLab do this, or does anyone know of how I can make this happen?
I plan on doing a "Special Event Station" And of course we will be logging all the contacts that are made.
Now I know there are many web site that you can UP-Load your finished log,
And it will plot on a map all the locations that are in the log.
Done that many times. And we want to do something similar to that BUT....
We want it to happen Live.
Like say we contact AA6YQ, and log him. Then in real time, or as fast as possible he gets plotted on the map.
A Map that anyone can view.
Does anyone know of any way that this can be done?
+ To do that, you would need a web-hosted map application to which DXKeeper could upload individual QSOs as they are logged - as it now does with Club Log, eQSL, LoTW, and QRZ. I'm not aware of a web-hosted map application that does that. Furthermore, I would consider it low priority to extend DXKeeper to support it, given that supporting special event stations is not a typical activity for DXers. ? ? ? ? 73,
?
? ? ? ? ? ? ?Dave, AA6YQ
|
+ AA6YQ comments below
Can DXLab do this, or does anyone know of how I can make this happen?
I plan on doing a "Special Event Station" And of course we will be logging all the contacts that are made.
Now I know there are many web site that you can UP-Load your finished log,
And it will plot on a map all the locations that are in the log.
Done that many times. And we want to do something similar to that BUT....
We want it to happen Live.
Like say we contact AA6YQ, and log him. Then in real time, or as fast as possible he gets plotted on the map.
A Map that anyone can view.
Does anyone know of any way that this can be done?
+ To do that, you would need a web-hosted map application to which DXKeeper could upload individual QSOs as they are logged - as it now does with Club Log, eQSL, LoTW, and QRZ. I'm not aware of a web-hosted map application that does that. Furthermore, I would consider it low priority to extend DXKeeper to support it, given that supporting special event stations is not a typical activity for DXers. ? ? ? ? 73,
?
? ? ? ? ? ? ?Dave, AA6YQ
|
Re: QSO Path in DX Atlas?
Thanks Dave.? Sent reply directly to your email.? C
|
And so have we,
The mapping thing is what we are trying to do.
Joe WB9SBD
On 3/17/2025 10:48 AM, Robie - AJ4F via
groups.io wrote:
toggle quoted message
Show quoted text
I have used N1MM for special event operations.
Robie AJ4F
Can
DXLab do this, or does anyone know of how I can make this
happen?
I plan on doing a "Special Event Station" And of course we
will be
logging all the contacts that are made.
Now I know there are many web site that you can UP-Load your
finished log,
And it will plot on a map all the locations that are in the
log.
Done that many times. And we want to do something similar to
that BUT....
We want it to happen Live.
Like say we contact AA6YQ, and log him. Then in real time, or
as fast as
possible he gets plotted on the map.
A Map that anyone can view.
Does anyone know of any way that this can be done?
Joe WB9SBD
|
I hoped to be back from Indy in time to join you today but can¨t make it either.?
David Bunte
I have used N1MM for special event operations.
Robie AJ4F
Can DXLab do this, or does anyone know of how I can make this happen?
I plan on doing a "Special Event Station" And of course we will be
logging all the contacts that are made.
Now I know there are many web site that you can UP-Load your finished log,
And it will plot on a map all the locations that are in the log.
Done that many times. And we want to do something similar to that BUT....
We want it to happen Live.
Like say we contact AA6YQ, and log him. Then in real time, or as fast as
possible he gets plotted on the map.
A Map that anyone can view.
Does anyone know of any way that this can be done?
Joe WB9SBD
|
I have used N1MM for special event operations.
Robie AJ4F
Can DXLab do this, or does anyone know of how I can make this happen?
I plan on doing a "Special Event Station" And of course we will be
logging all the contacts that are made.
Now I know there are many web site that you can UP-Load your finished log,
And it will plot on a map all the locations that are in the log.
Done that many times. And we want to do something similar to that BUT....
We want it to happen Live.
Like say we contact AA6YQ, and log him. Then in real time, or as fast as
possible he gets plotted on the map.
A Map that anyone can view.
Does anyone know of any way that this can be done?
Joe WB9SBD
|
Can DXLab do this, or does anyone know of how I can make this happen?
I plan on doing a "Special Event Station" And of course we will be logging all the contacts that are made.
Now I know there are many web site that you can UP-Load your finished log,
And it will plot on a map all the locations that are in the log.
Done that many times. And we want to do something similar to that BUT....
We want it to happen Live.
Like say we contact AA6YQ, and log him. Then in real time, or as fast as possible he gets plotted on the map.
A Map that anyone can view.
Does anyone know of any way that this can be done?
Joe WB9SBD
|
New case is coming along, did you get the images of the build and what screws are needed?
--
|
Re: IC-PW1 configuration in DXLabCommander
+ AA6YQ comments below
デイブ、粥粥6額河。
尖盾。
暴は鴛遺或珂にこの彜蓑を岑らせ、それを個鋲する圭隈があるかどうかを儖ねます。
シゲ、干干1京遺珂
+ QSL. Please let me know what Icom has to say.
73,
デイブ, AA6YQ
|
Re: IC-PW1 configuration in DXLabCommander
デイブ、粥粥6額河。
?
尖盾。
暴は鴛遺或珂にこの彜蓑を岑らせ、それを個鋲する圭隈があるかどうかを儖ねます。
?
シゲ、干干1京遺珂
|
Re: IC-PW1 configuration in DXLabCommander
+ AA6YQ comments below
I do not know how to solve this problem.
I am waiting for someone to deliver a good solution.
+ The behavior that you report indicates that your PW1 is not correctly saving its settings. If that's the problem, only Icom can solve it.
73,
Dave, AA6YQ
|
Jim N7US
Craig
David Bunte