Thanks for the quick reply. I need a class on all the little steps, to support the reading the I keep forgetting. I added the App_QRZcom_logID to the log page display. That helps to find all that are missing the logID. What I fail to comprehend is why the uploaded log entry is present at QRX (including logId) but my local copy is missing the logid??
I tried to filter the log page display with APP_QRZcom_LogID = " ", that is invalid, also tried <> '#####' also failed. Guess I need more study time with sql?

Anyway, thanks for the help.

73
KE5WCT6

开云体育

Thank you.? I know those commands were not valid.? But I was trying any combination.

Radio was in cw mode and tried from sequence button.? I'll check the messages window.

Greg
AB7R

Sent from Proton Mail Android

+ AA6YQ comments below:

It is a shame that the Leaderboard function does not have a
start date as it impacts not only the 13 Colonies event (not
important to me) but also DXpeditions that recycle the same
callsign every few years.

+ I explained why the Leaderboard function does not have a start date in this post:

/g/DXLab/message/202232

? ? ?73,

? ? ? ? ? Dave, AA6YQ

# more AA6YQ comments below

There is a large text window that is blank.

+ What appears in the title bar of that Window?

++ The blank window is in the bridge window.? Says DXLab SC_WSJTX.? It appears there should be something there but never populates with anything.

# In your SpotCollector folder, is there a file named Errorlog.txt or SC_WSJTX_Errorlog.txt ?

# If either or both are present, please attach them to an email message, and send that message to me via

aa6yq (at) ambersoft.com

? ? ? 73,

? ? ? ? ? ? ?Dave, AA6YQ

+ AA6YQ comments below

When I run the QRZ sync function, the returned "QRZ_ADIF_report .txt" lists error messages: "Error: QSO reported as confirmed is not present in log (LogID = 491928052)".

+ That means the QSO was not uploaded to QRZ from DXKeeper.

To find these qso log entries,? I use the LogID number to search the QRZ log which returns the appropriate log entry with its call sign.? I then have to search DXKeeper? for that corresponding qso entry.?

In DXKeeper, I noticed that most of my qso entries for QRZ sent have a tag in red that gives "QRZ (LogID = #######)". The entries that do not have this notation, are the ones that are in the error report "QRZ_ADIF_report .txt". I find that by right clicking on the entry and 'upload to QRZ', the LogID number is applied to the DXKeeper log entry.

+ That's how DXKeeper shows you that the QSO's LogID item is not specified.

I have not found any information on the purpose of the QRZ LogID number.?

+ That's documented here:

"unique identifier assigned to this QSO by its??logbook"

?

I also notice that the "QRZ_ADIF_report .txt" header indicates that "Received eQSLs" has something to do with this QRZ sync function.

+ That looks like a defect caused by my re-using the code from the "Sync eQSL.cc QSLs" function when I implemented the "Sync QRZ QSLs" function; I will investigate, but you can ignore it.

?

Is there any way to filter DXKeeper to find all of the entries missing the LogID number, and then upload them as a group?

+ The current version of DXKeeper can only upload all QSOs that haven't been uploaded to QRZ; the next version has been extended to enable limiting the upload to QSOs in the Log Page Display.

+ I suggest that you invoke the "Upload to QRZ" button; doing so should upload all QSOs whose "QRZ Sent" items are not set to 'Y' or 'N'.? I expect this includes the QSOs whose LogID? items are unspecified.

?

Is there any specific function or purpose in DXKeeper for the use of the LogID numbers, other that a reference link? to QRZ log entries?

+ Yes: they enable the "Sync QRZ QSLs" function to more quickly locate QSOs in your DXKeeper log, and they prevent inadvertent modifications to a QSO's callsign, band, mode, or start date/time - in either QRZ or DXKeeper - from breaking that QSO's linkage between DXKeeper and QRZ.

?

Thanks for any information/assistance you provide.?

+ I suggest that you review

+ Step-by-step instructions for frequency usage scenarios are available here:

? ? ?73,

? ? ? ? ? ? ?Dave, AA6YQ

+ AA6YQ comments below

I know about having to terminate all applications.? You couldn't save it otherwise.? I already documented the three tests in last post.

Test 1 - Yes
Test 2 - No
Test 3 - No

All the DXLab applications are the latest release.

+ OK. So that I can see what's going on, please do the following

1. start DXView
2. on the Configuration window's General tab, check the "Log debugging info" box
3. terminate DXView
4. start DXView
5. set your QTH latitude and longitude
6. terminate DXView
7. direct the Launcher to save DXView's settings to your Workspace
8. start DXView
9. on the Configuration window's General tab, uncheck the "Log debugging info" box
10. attach the errorlog.txt file from your DXView folder to an email message, and send the message to me via

aa6yq (at) ambersoft.com
? ? ?
? ? ?73,

? ? ? ? ? ? Dave, AA6YQ

When I run the QRZ sync function, the returned "QRZ_ADIF_report .txt" lists error messages: "Error: QSO reported as confirmed is not present in log (LogID = 491928052)".
To find these qso log entries,? I use the LogID number to search the QRZ log which returns the appropriate log entry with its call sign.? I then have to search DXKeeper? for that corresponding qso entry.?

In DXKeeper, I noticed that most of my qso entries for QRZ sent have a tag in red that gives "QRZ (LogID = #######)". The entries that do not have this notation, are the ones that are in the error report "QRZ_ADIF_report .txt". I find that by right clicking on the entry and 'upload to QRZ', the LogID number is applied to the DXKeeper log entry.

I have not found any information on the purpose of the QRZ LogID number.?
I also notice that the "QRZ_ADIF_report .txt" header indicates that "Received eQSLs" has something to do with this QRZ sync function.

Is there any way to filter DXKeeper to find all of the entries missing the LogID number, and then upload them as a group?
Is there any specific function or purpose in DXKeeper for the use of the LogID numbers, other that a reference link? to QRZ log entries?

Thanks for any information/assistance you provide.? This is a great software package.

73
Mike / KE5WCT

partial of "QRZ_ADIF_report .txt":
Received eQSLs for KE5WCT ?QTH Nickname: Elgin
for QSOs between 26-Jun-2012 and 24-Jun-2022 and uploaded on or after 17-Jun-2024 00:00Z
Generated on Friday, June 28, 2024 at 16:35:07 PM UTC
<PROGRAMID:21>eQSL.cc DownloadInBox
<ADIF_Ver:5>3.1.0

Date ? ? ?Time ? ? ? ? ? Call ? ?Band ? ? ? ? ?Mode ? ? ? Submode ? ? ? Station Call ? ?Result

? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? Error: QSO reported as confirmed is not present in log (LogID = 491928052)
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? Error: QSO reported as confirmed is not present in log (LogID = 491928234)
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? Error: QSO reported as confirmed is not present in log (LogID = 491928252)
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? Error: QSO reported as confirmed is not present in log (LogID = 541961804)

+ AA6YQ comments below

Trying to set some slider controls.? I have the set for AF and RFG both main and sub.? Now trying to do a button for text decode.

Tried TD$/; to toggle....nothing happens.
Tried TD/; nothing happens.
Tried TD$223;? nothing...
tried TD223;? nothing.

Radio is in CW mode.

According to the K4 programmer's guide this should work.

+ Here's what version C13 of the K4 programming manual says about the TD$ command:

TD$ (Text Decode/Encode Mode)

SET/RESP format: TD$mtl; where is m the text-decode mode; t is the text-decode threshold (where applicable); and is l the number of received text lines to display.
Per-operating-mode details below.

CW text decode mode: 0=off, 1=TX only (N/A at present), 2=RX 8 to 45 WPM, 3=RX 8 to 60 WPM, 4=RX 8 to 90 WPM.
CW threshold settings: 0=AUTO, 1-9=fixed levels.

DATA text decode modes: 0=off, 1=on. Threshold setting: N/A.

SSB encode mode (2-tone): 0=2-TONE off, 1=on. Threshold setting: N/A

+ Of the 4 commands you report trying, only the third is valid; the 2nd and 4th are missing the $, and the 1st includes a /, which is not valid.

+ The TD$223; command is only valid when your K4's mode is set to CW. I'd try generating it from a user-defined command sequence, not a slider. You can use Commander's Messages window to confirm that you are sending the desired command and to see what your K4 sends in response.

? ? ?73,

? ? ? ? ? ?Dave, AA6YQ

Hi Dave,

I know about having to terminate all applications.? You couldn't save it otherwise.? I already documented the three tests in last post.

Test 1 - Yes
Test 2 - No
Test 3 - No

All the DXLab applications are the latest release.

Thanks,
Art

+ AA6YQ comments below

I decided to move all my logging back to DXL.? Using a K4 connected via TCI.?

+ For what is TCI an abbreviation?

WSJTX radio set to DXL Commander and seems to be OK.

When clicking a SC spot from WSJTX it does a DXK lookup but does not populate the capture window.?
It does Log the entry once WSJTX Log QSO is clicked.?
Is this normal?

+ Yes. See the "Logging QSOs to DXKeeper" section of

There is a SC to WSJTX bridge window that opens and says both are connected.?

+ You can dismiss that window.

?

There is a large text window that is blank.

+ What appears in the title bar of that Window?

? ? ? ?73,

? ? ? ? ? ? ? Dave, AA6YQ

Trying to set some slider controls.? I have the set for AF and RFG both main and sub.? Now trying to do a button for text decode.

Tried TD$/; to toggle....nothing happens.
Tried TD/; nothing happens.
Tried TD$223;? nothing...
tried TD223;? nothing.

Radio is in CW mode.

According to the K4 programmer's guide this should work.

Tnx
Greg

I decided to move all my logging back to DXL.? Using a K4 connected via TCI.? WSJTX radio set to DXL Commander and seems to be OK.

When clicking a SC spot from WSJTX it does a DXK lookup but does not populate the capture window.? It does Log the entry once WSJTX Log QSO is clicked.?
Is this normal?

There is a SC to WSJTX bridge window that opens and says both are connected.? There is a large text window that is blank.? I could have sworn it populated with call info similar to what Grid Tracker does but it just stays blank.? Did I miss a check box somewhere?

Thanks
Greg
Ab7r

You could set up a custom SQL with all 16 callsigns and mode
for each of the CW, SSB, DATA modes then edit the SQL each
time you work one of them. For example:

(Callsign in ('K2A','K2B','K2C','K2D','K2E','K2F','K2G','K2H','K2I',
'K2J','K2K','K2L','K2M','WM3PEN','GB13COL','TM13COL') and (Mode
= 'CW')) or
(Callsign in ('K2A','K2B','K2C','K2D','K2E','K2F','K2G','K2H','K2I',
'K2J','K2K','K2L','K2M','WM3PEN','GB13COL','TM13COL') and (Mode
= 'SSB')) or
(Callsign in ('K2A','K2B','K2C','K2D','K2E','K2F','K2G','K2H','K2I',
'K2J','K2K','K2L','K2M','WM3PEN','GB13COL','TM13COL') and (Mode
in ('FT8','FT4','RTTY','PSK31')))

It is a shame that the Leaderboard function does not have a
start date as it impacts not only the 13 Colonies event (not
important to me) but also DXpeditions that recycle the same
callsign every few years.

73,

... Joe, W4TV

开云体育

G

+ AA6YQ comments below

?

That doesn't work.?
1st iteration:
I changed the Lat & Long closed the DXV configurator.? Open the configurator and confirmed that the changes were still present.? Terminated DXV then saved DXV settings to workspace.? Terminated DXLab launcher. ?Started Launcher started DXV, loaded settings from workspace; old setting still present.

2nd iteration:
I changed the Lat & Long closed the DXV configurator.? Open the configurator and confirmed that the changes were still present.? Terminated DXV then saved DXV settings to workspace.? Then saved all DXLab App settings to workspace.? Terminated DXLab launcher.? Started Launcher started DXV, loaded settings from workspace; old setting still present.

Any other suggestions?

+ You can only save an application's settings to a Workspace when that application is not running.

+ You can only load an application's settings from a Workspace when that application is not running. Please try these three tests:

?

+ Test #1

1. start DXView
2. set your QTH latitude and longitude
3. terminate DXView
4. start DXView

+ Are the QTH latitude and longitude settings correct?

?

+ Test #2

1. start DXView
2. set your QTH latitude and longitude
3. terminate DXView
4. direct the Launcher to save DXView's settings to your Workspace
5. start DXView

+ Are the QTH latitude and longitude settings correct?

?

+ Test #3

1. terminate DXView
2. direct the Launcher to load DXView's settings from your Workspace
3. start DXView

+ Are the QTH latitude and longitude settings correct?

? ? ?73,

? ? ? ? ? ? ?Dave, AA6YQ

?

?

?

Are you placing the wanted callsigns in the Special Callsigns list
with a Leaderboard tag? I can't determine if there is a <Start: >
option for Leaderbaord entries or if there is some other way to
exclude "old" contacts.

73,

... Joe, W4TV