Re: Clublog Upload TImeout
Perhaps ClubLog was not accepting uploads/log-ins temporarily:
<>
73,
... Joe, W4TV
toggle quoted message
Show quoted text
On 2020-04-14 11:02 AM, Sherman Banks wrote: It's working again, but I'm not sure exactly why it's fixed. I determined that the upload was not making it to Clublog by changing to an incorrect Clublog password and the error messages stayed the same. I verified that DXKeeper is an approved app in the Firewall. On a whim, I turned Firewall off and it still had the problem. WIth Firewall still off, I rebooted the computer, and the upload was successful. I turned Firewall back on, rebooted, and it was still successful.? Very strange.
|
I run ESET Internet Security ¨C no problems at all. I have Windows 10 Pro, so disabled Defender completely via Group Policies.? Peace of mind¡ ? Something Windows DID mess up with a recent update : I keep my time set via Meinberg NTP, which during installation disables the Windows Time Service. Windows decided on it¡¯s own to turn this back on ¨C and as a result interfered with Meinberg¡. JTDX (my operating platform of choice) has a nice feature that highlights a warning if the time goes significantly out based on average DTs,? and upon checking immediately disabled the offending Windows Time Service ¨C voila, back to exact time!! ? Bottom line : after a Windows Update, check EVERYTHING!!! ? 73 de BARRY MURRELL ZS2EZ KF26ta - Port Elizabeth, South Africa EPC#0558?DMC#1690? 30MDG#4081 DXCC HONOR ROLL (332/340) DXCC(mixed)#41,146? DXCC(RTTY)#1,916 DXCC(phone)#34,990? DXCC(CW)#11,714 DXCC 80m,40m,30m,20m,17m,15m,12m,10m?? 5BDXCC#8,916 WAS Triple Play #492? WAS(RTTY)#538? WAS(Digital)#163-Endorsements JT65,FT8 WAZ(RTTY)#185? WAE-I(mixed)#72? WAZS(mixed)#214? AAA#1569 AS ZR6DXB: VUCC(50MHZ)#1,334? UKSMG WAE(Silver)#75? UKSMG AFRICA#22? WAC (Satellite) website : ?
toggle quoted message
Show quoted text
From: [email protected] [mailto:[email protected]] On Behalf Of neil_zampella
Sent: Tuesday, 14 April 2020 18:01
To: [email protected]
Subject: Re: [DXLab] Windows Defender? Do you have any other AV program on your computer????? Windows shouldn't 'help' you by turning on Defender if you have another AV running, Neil, KN3ILZ On 4/14/2020 11:14 AM, Dick Grote via groups.io wrote: I can't prove it, but I believe that even though I had disabled Windows Defender as my virus program, that during the last Windows update it was re-enabled during the update process.? I'm going to enable it long enough to exclude DXLabs just to be on the safe side when another Windows upgrade occurs.
73,
--
Dick
K6PBF
|
Re: Clublog Upload TImeout
toggle quoted message
Show quoted text
On Tue, Apr 14, 2020 at 08:02 AM, Sherman Banks wrote:
It's working again, but I'm not sure exactly why it's fixed. I determined that the upload was not making it to Clublog by changing to an incorrect Clublog password and the error messages stayed the same. I verified that DXKeeper is an approved app in the Firewall. On a whim, I turned Firewall off and it still had the problem. WIth Firewall still off, I rebooted the computer, and the upload was successful. I turned Firewall back on, rebooted, and it was still successful.? Very strange.?
+ Based on your description, there are several possible culprits, but DXKeeper isn't one of them.
? ? ? ?73,
? ? ? ? ? ? Dave, AA6YQ
?
|
Re: Having Trouble with DXK QSL Tab Add Needed Function
toggle quoted message
Show quoted text
On Tue, Apr 14, 2020 at 03:45 AM, Dale Drake wrote:
The QSL RCVD for the 6 was set to R but changed to blank when I ran Add Needed and the 1 was set to Y and it too changed to blank.? I tried resetting them to their original R an Y and re-ran the Add Needed and got the same result.
+ Please identify the 7 QSOs in an email message to which you've attached a zip archive containing your log file (the .mdb) and a screen shot showing the Awards tab of DXKeeper's Configuration window; then send the email to me via aa6yq (at) ambersoft.com ? ? ? ?73, ? ? ? ? ? ? ?Dave, AA6YQ
|
We use an alternative AV here as well and WIndows-10 Pro did no turn Defender back on at the last update? It has popped up a few "NAG" notices about turning Windows Firewall back on? but did not override my current settings.
I have had WIN10- play games with some USB drivers in the recent past though ....... 8^(
Dave
manuals@...
toggle quoted message
Show quoted text
On 4/14/2020 12:12 PM, Ted Bauer wrote: Yes, I use ESET and have not had happen what you are all reporting.
73
---
Ted ? WA3AER
On Tue, Apr 14, 2020 at 12:01 PM neil_zampella <neilz@... <mailto:neilz@...>> wrote:
Do you have any other AV program on your computer? Windows
shouldn't 'help' you by turning on Defender if you have another AV
running,
Neil, KN3ILZ
On 4/14/2020 11:14 AM, Dick Grote via groups.io <>
wrote:
I can't prove it, but I believe that even though I had disabled
Windows Defender as my virus program, that during the last
Windows update it was re-enabled during the update process.? I'm
going to enable it long enough to exclude DXLabs just to be on
the safe side when another Windows upgrade occurs.
73,
--
Dick
K6PBF <>
Virus-free. www.avg.com
<>
<#m_2970554835214802238_DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
--
---
Ted? ?WA3AER
-- Dave Manuals@... www.ArtekManuals.com
--
This email has been checked for viruses by Avast antivirus software.
|
Yes, I use ESET and have not had happen what you are all reporting.
On Tue, Apr 14, 2020 at 12:01 PM neil_zampella < neilz@...> wrote:
Do you have any other AV program on your computer????? Windows
shouldn't 'help' you by turning on Defender if you have another AV
running,
Neil, KN3ILZ
On 4/14/2020 11:14 AM, Dick Grote via
wrote:
I can't prove it, but I believe that even though I had disabled
Windows Defender as my virus program, that during the last Windows
update it was re-enabled during the update process.? I'm going to
enable it long enough to exclude DXLabs just to be on the safe
side when another Windows upgrade occurs.
73,
--
Dick
K6PBF
--
---
Ted? ?WA3AER
|
Do you have any other AV program on your computer????? Windows
shouldn't 'help' you by turning on Defender if you have another AV
running,
Neil, KN3ILZ
On 4/14/2020 11:14 AM, Dick Grote via
groups.io wrote:
I can't prove it, but I believe that even though I had disabled
Windows Defender as my virus program, that during the last Windows
update it was re-enabled during the update process.? I'm going to
enable it long enough to exclude DXLabs just to be on the safe
side when another Windows upgrade occurs.
73,
--
Dick
K6PBF
|
I can't prove it, but I believe that even though I had disabled Windows Defender as my virus program, that during the last Windows update it was re-enabled during the update process.? I'm going to enable it long enough to exclude DXLabs just to be on the safe side when another Windows upgrade occurs.
73,
--
Dick
K6PBF
|
Re: Clublog Upload TImeout
It's working again, but I'm not sure exactly why it's fixed. I determined that the upload was not making it to Clublog by changing to an incorrect Clublog password and the error messages stayed the same. I verified that DXKeeper is an approved app in the Firewall. On a whim, I turned Firewall off and it still had the problem. WIth Firewall still off, I rebooted the computer, and the upload was successful. I turned Firewall back on, rebooted, and it was still successful.? Very strange.?
|
Re: Having Trouble with DXK QSL Tab Add Needed Function
Dale,
maybe you should use "Add Requested" instead of "Add Needed".
73 de
Salvatore (I4FYV)
|
Re: Having Trouble with DXK QSL Tab Add Needed Function
The QSL RCVD for the 6 was set to R but changed to blank when I ran Add Needed and the 1 was set to Y and it too changed to blank.? I tried resetting them to their original R an Y and re-ran the Add Needed and got the same result.
Dale
|
Re: My Defender past 3 days
Thank you Hasan, I will try that.
73, Pete, N4KW
On 4/13/2020 4:52 PM, Hasan Schiers
N0AN wrote:
toggle quoted message
Show quoted text
IMPORTANT
WARNING!!!
I am neither a computer nor a cyber-security expert.
I offer this information as a "good faith" attempt to help
people who do not seem to understand how to work with Windows
Defender. I am merely sharing what I have done and has worked
for me.
While believed to be correct, this advice comes with
no guarantees of any kind. You alone remain responsible
for the security of information on your computer system,
as well as the continuing proper operation of your
equipment.
The following
info explains how to do two things in Windows Defender:
1. Get a file
out of quarantine
2. Set up
Exclusions for DXLab Suites (or any program) so they don't get
quarantined (again)
Doing #2
assumes some risk as has been discussed to death on this list.
But it should stop DXL programs from being quarantined.
Doing #1 gets
your file out of quarantine, if you had not already done #2,
or chose not to do #2 and as a result, will? have to
repeatedly do #1 every time a new update comes out.
What follows
here is a link to the text file which explains step by step
how to do #1 and #2 above. It is taking you to my Google Drive
and giving you permission to download it.?
If you are
worried that it might contain something bad, don't download
it!
If you don't
understand the instructions or can't get them to work, I
cannot help you. They work for me, and I don't want to be
inundated with "how do I" , "how come", "why does it",? etc...
For those
whom it can help as it stands, feel free to use it. For those
who cannot, look for a better source.
73, N0AN
On Mon, Apr 13, 2020 at 9:49
AM Pete N4KW < n4kwpete@...>
wrote:
Apr
3 no Commander, but after reading Joe's instructions I was
able to
restore Commander.
Apr 3 later same day I lost DXK, Joe's instructions again
bailed me out.
Apr7 I believe it was, I again lost DXK, no icon on my desktop
etc. This
time I used Joe's procedure to
????????? prevent Defender from messing with DXLab Suite.
Apr 13 this morning open up no icon for DXK and opened up
defender and
see that DXK is quarantined.
???????????? So back to Joe's instruction and DXK is back
along with the
desk top icon.
I've never seen this before, and fear that there is something
else
running around or I should say "it has me running around"
73, Pete, N4KW
|
Re: Having Trouble with DXK QSL Tab Add Needed Function
+ AA6YQ comments below
When I run the Add Needed for IOTA award DXK populates 14 QSO's into the QSL queue. Seven of these QSO's are OK ( no QSL yet sent or received and it is for an IOTA I need) but 6 of them are for QSO that I have already sent and request a QSL card (just waiting for the return card) and one for a QSO that the QSL card has been received already.
+ To what is the "QSL Rcvd" item set in each of the 6 QSOs for which you've already requested a confirmation, and in the 1 QSO whose confirmation you have received?
73,
Dave, AA6YQ
|
Having Trouble with DXK QSL Tab Add Needed Function
When I run the Add Needed for IOTA award DXK populates 14 QSO's into the QSL queue.? Seven of these QSO's are OK ( no QSL yet sent or received and it is for an IOTA I need) but 6 of them are for QSO that I have already sent and request a QSL card (just waiting for the return card) and one for a QSO that the QSL card has been received already.? I've looked over these QSO's and read through the help files and can't figure out why this is happening. From what I understand from the help file is that DXK should not be adding QSO's to the queue that have had cards already sent.? What am I confused about or doing wrong?
Dale AA1QD
|
Re: Commander loosing control of radios
If power on the USB port were the problem it seems the other Commander would
see the same thing. I think it is something else.
Outlook Laptop Gil W0MN
Hierro candente, batir de repente
44.08226N 92.51265W EN34rb
toggle quoted message
Show quoted text
-----Original Message----- From: [email protected] < [email protected]> On Behalf Of Dave / NR1DX Sent: Monday, April 13, 2020 16:26 To: [email protected]Subject: Re: [DXLab] Commander loosing control of radios Tom Since there was also a WIN-10 update recently go check all the settings under power management in Window's setting. and look at the settings on the COM port you use to talk to Commander in device manager (<WIN><X><Device Manager>) I had a similar problem last year after an update where my mouse would would suddenly die after 30minutes . There was a windows setting that powered down some of the USB ports after a while, that the genius's at MS decided to check or uncheck the box for me during an update Dave NR1DX On 4/13/2020 5:06 PM, tgzuber wrote: I been having trouble with commander loosing control of my radios and
sent an email earlier about it. At that that time I checked all ports
to make sure they would not turn off automatically and set Windows
Defender (the only anti-virus program on my computer) to accept the
DXLabs folder as well as all the individual folders within the main
folder.
After doing some checking around, I have found that Commander 1426
works without a glitch. All versions after that produce the connection
loss problem. Commander versions 1431 and up will loose contact after
1/2 hour or there abouts. Last week when Version 1455 became available
I installed it and upon running it discovered it looses contact every
5 minutes.
I'm happily running 1431 but am curious why later versions are causing
the problem. My radios are Yaesu FT-2000 and Ft-847 and my computer is
a 6 month old intel i5 with Windows 10Pro..
Any clues would be appreciated.
Tom WN?DRC
-- Dave Manuals@... www.ArtekManuals.com -- This email has been checked for viruses by Avast antivirus software. -- W0MN EN34rb 44.08226 N 92.51265 W Hierro candente, batir de repente HP Laptop
|
Re: Commander loosing control of radios
Tom
Since there was also a WIN-10 update recently go check all the settings under power management in Window's setting. and look at the settings on the COM port you use to talk to Commander in device manager (<WIN><X><Device Manager>) I had a similar problem last year after an update where my mouse would would suddenly die after 30minutes . There was a windows setting that powered down some of the USB ports after a while, that the genius's at MS decided to check or uncheck the box for me during an update
Dave
NR1DX
toggle quoted message
Show quoted text
On 4/13/2020 5:06 PM, tgzuber wrote: I been having trouble with commander loosing control of my radios and sent an email earlier about it. At that that time I checked all ports to make sure they would not turn off automatically and set Windows Defender (the only anti-virus program on my computer) to accept the DXLabs folder as well as all the individual folders within the main folder.
After doing some checking around, I have found that Commander 1426 works without a glitch. All versions after that produce the connection loss problem. Commander versions 1431 and up will loose contact after 1/2 hour or there abouts. Last week when Version 1455 became available I installed it and upon running it discovered it looses contact every 5 minutes.
I'm happily running 1431 but am curious why later versions are causing the problem. My radios are Yaesu FT-2000 and Ft-847 and my computer is a 6 month old intel i5 with Windows 10Pro..
Any clues would be appreciated.
Tom WN?DRC
-- Dave Manuals@... www.ArtekManuals.com
--
This email has been checked for viruses by Avast antivirus software.
|
Re: Commander loosing control of radios
+ AA6YQ comments below
I been having trouble with commander loosing control of my radios and sent an email earlier about it.
+ Please point me at your previous post here so I can have the full context.
At that that time I checked all ports to make sure they would not turn off automatically and set Windows Defender (the only anti-virus program on my computer) to accept the DXLabs folder as well as all the individual folders within the main folder.
After doing some checking around, I have found that Commander 1426 works without a glitch. All versions after that produce the connection loss problem. Commander versions 1431 and up will loose contact after 1/2 hour or there abouts. Last week when Version 1455 became available I installed it and upon running it discovered it looses contact every 5 minutes.
I'm happily running 1431 but am curious why later versions are causing the problem. My radios are Yaesu FT-2000 and Ft-847 and my computer is a 6 month old intel i5 with Windows 10Pro..
+ Please do the following:
1. start Commander 14.5.5
2. on the Configuration window's General tab, check the "Log debugging info" box
3. wait until Commander stops tracking the radio's frequency changes
4. on the Configuration window's General tab, uncheck the "Log debugging info" box
5. attach the errorlog.txt file to an email message, and send the message to me via
aa6yq (at) ambersoft.com
73,
Dave, AA6YQ
|
Re: Scanning Commander memories banks
toggle quoted message
Show quoted text
On Mon, Apr 13, 2020 at 01:34 PM, Herman / PA3BFH wrote:
I'v set up several memory banks with different club frequencies, the ten positions per bank nicely fit one QRG for each band from 160 - 6 m :-)
Now I want to scan just three or four of these QRG's, depending on time of day.
Any easy way of just using these three/four QRG's ???:-\
+ There's not.
? ? ? ?73,
? ? ? ? ? ? ?Dave, AA6YQ
|
Commander loosing control of radios
I been having trouble with commander loosing control of my radios and sent an email earlier about it. At that that time I checked all ports to make sure they would not turn off automatically and set Windows Defender (the only anti-virus program on my computer) to accept the DXLabs folder as well as all the individual folders within the main folder.
After doing some checking around, I have found that Commander 1426 works without a glitch. All versions after that produce the connection loss problem. Commander versions 1431 and up will loose contact after 1/2 hour or there abouts. Last week when Version 1455 became available I installed it and upon running it discovered it looses contact every 5 minutes.
I'm happily running 1431 but am curious why later versions are causing the problem. My radios are Yaesu FT-2000 and Ft-847 and my computer is a 6 month old intel i5 with Windows 10Pro..
Any clues would be appreciated.
Tom WN?DRC
|
Re: My Defender past 3 days
IMPORTANT WARNING!!!
I am neither a computer nor a cyber-security expert.
I offer this information as a "good faith" attempt to help people who do not seem to understand how to work with Windows Defender. I am merely sharing what I have done and has worked for me.
While believed to be correct, this advice comes with no guarantees of any kind. You alone remain responsible for the security of information on your computer system, as well as the continuing proper operation of your equipment.
The following info explains how to do two things in Windows Defender:
1. Get a file out of quarantine
2. Set up Exclusions for DXLab Suites (or any program) so they don't get quarantined (again)
Doing #2 assumes some risk as has been discussed to death on this list. But it should stop DXL programs from being quarantined.
Doing #1 gets your file out of quarantine, if you had not already done #2, or chose not to do #2 and as a result, will? have to repeatedly do #1 every time a new update comes out.
What follows here is a link to the text file which explains step by step how to do #1 and #2 above. It is taking you to my Google Drive and giving you permission to download it.?
If you are worried that it might contain something bad, don't download it!
If you don't understand the instructions or can't get them to work, I cannot help you. They work for me, and I don't want to be inundated with "how do I" , "how come", "why does it",? etc...
For those whom it can help as it stands, feel free to use it. For those who cannot, look for a better source.
73, N0AN
On Mon, Apr 13, 2020 at 9:49 AM Pete N4KW < n4kwpete@...> wrote: Apr 3 no Commander, but after reading Joe's instructions I was able to
restore Commander.
Apr 3 later same day I lost DXK, Joe's instructions again bailed me out.
Apr7 I believe it was, I again lost DXK, no icon on my desktop etc. This
time I used Joe's procedure to
????????? prevent Defender from messing with DXLab Suite.
Apr 13 this morning open up no icon for DXK and opened up defender and
see that DXK is quarantined.
???????????? So back to Joe's instruction and DXK is back along with the
desk top icon.
I've never seen this before, and fear that there is something else
running around or I should say "it has me running around"
73, Pete, N4KW
|
Sherman Banks (W4ATL)
Dale Drake
Gilbert Baron W0MN