Ok wasn't sure to do that without checking
On 4/7/2020 5:42 PM, ND9G Mike wrote:
toggle quoted message
Show quoted text
Mike
Likely a false positive from your anti-virus. Lots of
threads about them the last few days.
Check your anti-virus to see if it has quarantined it,
where you can likely reverse the quarantine and add an
exception for DX Lab stuff.
On Tue, Apr 7, 2020 at 4:35 PM
Mike Kasrich < aj9c@...> wrote:
I just got an alert and commander is now longer working
is windows confused or do I have a problem?
![]()
|
+ AA6YQ comments below
Is there a setting in DXKeeper that it grabs name from PathFinder when I log a QSO?
+ Yes. Configure DXKeeper to use "QRZ via Pathfinder" as a callbook. Step-by-step instructions are here:
<.
73,
Dave, AA6YQ
|
Status:? quarantined
Threat detected:? trojan:win32/azden.B!cl
Affected items
c:\dxlab\commander\ci-v commander.exe
C;\programdata/microsoft\windows\start menu\programs\dxlab
suitecommander.lnk
process: pid:84140,processstart:132307315755898195
That is what didnt get posted
On 4/7/2020 5:35 PM, Mike Kasrich
wrote:
toggle quoted message
Show quoted text
I just got an alert and commander is now longer working is
windows confused or do I have a problem?
|
Mike
Likely a false positive from your anti-virus. Lots of threads about them the last few days.
Check your anti-virus to see if it has quarantined it, where you can likely reverse the quarantine and add an exception for DX Lab stuff.
On Tue, Apr 7, 2020 at 4:35 PM Mike Kasrich < aj9c@...> wrote:
I just got an alert and commander is now longer working is
windows confused or do I have a problem?
![]()
|
* more AA6YQ comments below
In commander, in netserv.
* Commander stores those settings in the Windows Registry between sessions; I just tested it to confirm correct operation. There have been no changes in this area of Commander for years.
* Do you have a Workspace defined? If so, are you restoring settings from that Workspace on startup?
73,
Dave, AA6YQ
toggle quoted message
Show quoted text
On 4/7/2020 12:57 PM, Dave AA6YQ wrote:
+ AA6YQ comments below
How can I save the settings tp appear from session to session?
+ About which DXLab application are you inquiring?
73,
Dave, AA6YQ
|
Guess the "paste" isnt showing....defender says I have a trojan
on the computer
On 4/7/2020 5:35 PM, Mike Kasrich
wrote:
toggle quoted message
Show quoted text
I just got an alert and commander is now longer working is
windows confused or do I have a problem?
|
I just got an alert and commander is now longer working is
windows confused or do I have a problem?
|
Re: Commander -- Here we go again!!!
Click on? Windows security, Virus and threat protection, manage settings, add or remove exclusions, then add an exclusion, folder, then select dxlab. Save settings and your troubles with false positives with ?dxlab is over ! ? 73 Jeff kb2m ?
toggle quoted message
Show quoted text
From: [email protected] <[email protected]> On Behalf Of Richard Lawn
Sent: Tuesday, April 07, 2020 16:42
To: [email protected]
Subject: Re: [DXLab] Commander -- Here we go again!!! ? I just tried to upgrade Commander to the latest version and it's telling me it can't because the Commander.exe does not exist. This is after I followed the directions suggested to exclude it from being quarantined by Windows Defender. Now what do I do?
--
Rick, W2JAZ
|
Re: Commander -- Here we go again!!!
+ AA6YQ comments below
I just tried to upgrade Commander to the latest version and it's telling me it can't because the Commander.exe does not exist. This is after I followed the directions suggested to exclude it from being quarantined by Windows Defender. Now what do I do?
+ Directing your anti-malware application to stop quarantining Commander in the future will not undo the quarantining it has already done. Direct it to restore the quarantined Commander. If you don't know how to do that, please contact Microsoft Support.
+ Alternatively, use Windows Explorer to navigate to your Commander folder. If the file
CI-V Commander1455.exe
+ is present, make a copy of it. If that file isn't present but the file
CI-V Commander1453.exe
+ is present, make a copy of it.
+ However you created the copy, rename it to
CI-V Commander.exe
73,
Dave, AA6YQ
|
Re: DXKeeper: Aux panel appears after Sync LotW QSOs operation
+ AA6YQ comments below
Thank you Dave,
That's very interesting. But,
1. Right now I clicked on that QSO in my LPD, and the country code says 291; also the "rx band" field (in the Aux panel) says "6M". This QSO was logged to DXK from WSJT-X. I'm not surprised it contained incorrect info - I've run into that problem before. I don't understand why it is now correct in DXK.
2. Before the KD2KJU QSO I made other QSOs on 6M and 30M today. I uploaded these QSOs in very small batches to LotW, waiting a bit and then doing Sync LotW QSOs. Each time that I did this, the Aux panel appeared. These times were before the KD2KJU QSO existed. I checked these previous QSOs and they all appear correct regarding country code and rx band. I also clicked the Broke button, with a null result in the LPD.
+ The next time this behavior occurs, please place your Log file in a zip archive, attach the zip archive to an email message that describes the faulty QSO (callsign, date, time, band mode), and send the message to me via
aa6yq (at) ambersoft.com
+ so that I can see what is going on.
73,
Dave, AA6YQ
|
Is there a setting in DXKeeper that it grabs name from PathFinder when I log a QSO?
--
|
In
commander, in netserv.
On 4/7/2020 12:57 PM, Dave AA6YQ wrote:
toggle quoted message
Show quoted text
+ AA6YQ comments below
How can I save the settings tp appear from session to session?
+ About which DXLab application are you inquiring?
73,
Dave, AA6YQ
|
Re: Commander -- Here we go again!!!
I use McAfee???? ?All is well
?
Sent from for Windows 10
?
toggle quoted message
Show quoted text
From: Inbody, Don
Sent: Tuesday, April 7, 2020 3:53 PM
To: [email protected]
Subject: Re: [DXLab] Commander -- Here we go again!!!
?
I discovdered that Commander.exe had been renamed commander1.exe.
?
?
You? have to go into your Anti-Virus program and find the Quarantine section, Quarantine History and then see the missing file listed, then: RESTORE the file.
73, N0AN (this is for Windows Defender)
?
?
On Tue, Apr 7, 2020 at 3:42 PM Richard Lawn <rjlawn@...> wrote:
I just tried to upgrade Commander to the latest version and it's telling me it can't because the Commander.exe does not exist. This is after I followed the directions suggested to exclude it from being quarantined by Windows Defender. Now
what do I do?
--
Rick, W2JAZ
|
Re: Commander -- Here we go again!!!
I discovdered that Commander.exe had been renamed commander1.exe.
Rich, You? have to go into your Anti-Virus program and find the Quarantine section, Quarantine History and then see the missing file listed, then: RESTORE the file. 73, N0AN (this is for Windows Defender)
On Tue, Apr 7, 2020 at 3:42 PM Richard Lawn < rjlawn@...> wrote: I just tried to upgrade Commander to the latest version and it's telling me it can't because the Commander.exe does not exist. This is after I followed the directions suggested to exclude it from being quarantined by Windows Defender. Now what do I do?
--
Rick, W2JAZ
|
Re: Commander -- Here we go again!!!
Rich, You? have to go into your Anti-Virus program and find the Quarantine section, Quarantine History and then see the missing file listed, then: RESTORE the file. 73, N0AN (this is for Windows Defender)
On Tue, Apr 7, 2020 at 3:42 PM Richard Lawn < rjlawn@...> wrote: I just tried to upgrade Commander to the latest version and it's telling me it can't because the Commander.exe does not exist. This is after I followed the directions suggested to exclude it from being quarantined by Windows Defender. Now what do I do?
--
Rick, W2JAZ
|
Re: Commander -- Here we go again!!!
I finally got it going again, but Defender made it extremely difficult because its Security Center would not open after repeated tries so I could not access the Quarantined files to free them.? I DID add specific exclusions to Defender last week for all of DXLabs and for DXLabs\Commander.? It did not help today. ? Lee, KY7M ?
|
Re: Commander -- Here we go again!!!
I just tried to upgrade Commander to the latest version and it's telling me it can't because the Commander.exe does not exist. This is after I followed the directions suggested to exclude it from being quarantined by Windows Defender. Now what do I do?
--
Rick, W2JAZ
|
Re: Commander -- Here we go again!!!
Dave, thanks for your reply but I owe an apology to you and the group. I meant my email as a reply to a specific user, not the list. I was not prepared to jump into the fray. I’m sorry.
73,
Fred/NA2U
toggle quoted message
Show quoted text
On Apr 7, 2020, at 12:42 PM, Dave AA6YQ <aa6yq@...> wrote:
?+ AA6YQ comments below
I haven’t user Commander locally since I started remoting. PLUS, I now have it on my “new” computer. Installed the update this morning and it doesn’t work. Windows Defender asked for permission to allow its installation and I clicked “Allow”. Zippo. I’m stuck for now. Because of all the changes I made I’m not quite sure where to start.
Fortunately, I don’t really use it.
+ Your actions have not reversed the damage caused by your anti-malware application. See
<>
73,
Dave, AA6YQ
|
Re: DXKeeper: Aux panel appears after Sync LotW QSOs operation
Thank you Dave,
That's very interesting. But,
1. Right now I clicked on that QSO in my LPD, and the country code says 291; also the "rx band" field (in the Aux panel) says "6M". This QSO was logged to DXK from WSJT-X. I'm not surprised it contained incorrect info - I've run into that problem before. I don't understand why it is now correct in DXK.
2. Before the KD2KJU QSO I made other QSOs on 6M and 30M today. I uploaded these QSOs in very small batches to LotW, waiting a bit and then doing Sync LotW QSOs. Each time that I did this, the Aux panel appeared. These times were before the KD2KJU QSO existed. I checked these previous QSOs and they all appear correct regarding country code and rx band. I also clicked the Broke button, with a null result in the LPD.
73, John W1JA
toggle quoted message
Show quoted text
-----Original Message----- From: [email protected] [mailto: [email protected]] On Behalf Of Dave AA6YQ Sent: Tuesday, April 7, 2020 3:40 PM To: john@... Cc: [email protected]Subject: Re: [DXLab] DXKeeper: Aux panel appears after Sync LotW QSOs operation Thanks for the errorlog.txt file, John. Here's the relevant fragment: 2020-04-07 16:58:11.524 > DXLogMain.ValidFields: KD2KJU 2020-04-07 16:58:11.525 > DXLogMain.ValidField: theDXCCID = 248, CorrectDXCCPrefix = I, DXLogMain.Fieldbox(DXCCPrefixField) = K 2020-04-07 16:58:11.525 > DXLogMain.ValidFields: not valid: DXCCID = 248 2020-04-07 16:58:11.526 > DXLogMain.ValidField: FreqRX = 50.314111, BandRX unspecified 2020-04-07 16:58:11.527 > DXLogMain.LogFrameSelect_Click, Index = 0 2020-04-07 16:58:11.527 > DXLogSetup.LogFrameVisible_Click, Index = 0, MakeVisible = True, LogFrameVisibleShift = 0 2020-04-07 16:58:11.528 > Main window height = 9525 2020-04-07 16:58:11.528 > Log grid height = 4158 2020-04-07 16:58:11.529 > DXLogMain.ValidField: enabling panel 0: BandRX error Your logged QSO with KD2KJU as its DXCC country code set to 248 (Italy) but its DXCC Prefix set to K. Also, its BandRX item is empty though its FreqRX specifies a 6m frequency. The combination of two different errors in the same QSO may be the reason that a label is not flashing to highlight what's wrong; I will investigate. 73, Dave, AA6YQ
|
Re: QSL labels bottom line font settings greyed out
I've sent you a new version of DXKeeper that never disables the "Bottom Line Font" panel on the "QSL Configuration" window's "QSL Labels" tab.
Please let me know how it goes.
73,
Dave, AA6YQ
Yes it is set to 3 columns.
|
Inbody, Don