On 2020-02-25 2:09 PM, vjohnson@... wrote:

How can I add 60M to the "DXView Info" matrix?

You *can not*

That would be MOST helpful, too!

For what? DXCC does not accept 60M and Dave has stated clearly
that he will not include 60M until DXCC accepts 60M single band
confirmations.

How can I add 60M to "Check Progress" > DXCC progress button OR
make a separate "Progress" button for 60M like there is for the other
reports (WAC reports, WAS, Maidenhead reports.....etc)?????

One could write a script ...

73,

... Joe, W4TV


On 2020-02-25 2:09 PM, vjohnson@... wrote:

Is there an EASY way to see 60 stats without going through all of the filtering steps?
How can I add 60M to the "DXView Info" matrix? ? That would be MOST helpful, too!
How can I add 60M to "Check Progress" > DXCC progress button? OR? make a separate "Progress" button for 60M like there is for the other reports (WAC reports, WAS, Maidenhead reports.....etc)?????
Thanks in advance for any suggestions.
73
Glenn W0GJ

Is there an EASY way to see 60 stats without going through all of the filtering steps?

How can I add 60M to the "DXView Info" matrix? ? That would be MOST helpful, too!

How can I add 60M to "Check Progress" > DXCC progress button? OR? make a separate "Progress" button for 60M like there is for the other reports (WAC reports, WAS, Maidenhead reports.....etc)?????


Thanks in advance for any suggestions.


73
Glenn W0GJ

Hi,

I'm new to DX Labs and this group.? Some of my DXCC credits are not showing as "V" on Clublog.? The QSOs are mostly from QSL cards I submitted to a field checker.

I imported my log from AC Log and DX Labs repaired a bunch of broken links.? I'd now like to export my DX Labs log to Clublog but the program asks for an ADIF file and I haven't been able to determine how to create an ADIF file yet.

I could use some help.

73,

Chris? NU1O

I want to transfer DXLab Suite to another laptop. I put together all the programs in a work space as directed in the on-line help files and installed DXLab on the second laptop. Then I remembered I use Google Drive to hold my log backups and databases for my primary and a club call sign. The file route is C:\Users\(name)\Google Drive\LogBackups\DXKeeper\.? Unfortunately, the (name) part is different on the two laptops.

If I complete the work space transfer, will I simply be able to edit the db file routing on the second laptop to make everything right?

I seem to remember reading something about problems caused with different user names a long time ago, but I can’t find an answer to this via searches. Could you tell me the easiest way to solve this problem or point me in the right direction for the needed information? I’d prefer some knowledgeable guidance before I go any farther.

Thanks,
-- John W8ES

开云体育

It happened?a couple of times before but the last time it was on VP8PJ so the JTAlerts database?may not be updated correctly.

JTAlert doesn't include non-active Lotw participating callsigns in the database. VP8PJ last uploaded to LoTW ~11 years ago. 11 years is outside the threshold of 3 years? uses to strip non-active callsigns. Once VP8PJ starts uploading to LoTW and his upload date is adjusted in the official Lotw membership file than The callsign will appear in the next JTAlert Callsign database published after that date.

de Laurie VK3AMA

+ AA6YQ comments below

+ AA6YQ comments below

I have the latest database installed and "Enable LotW Stripe/Flag" checked.

It happened a couple of times before but the last time it was on VP8PJ so the JTAlerts database may not be updated correctly.

+ When you're logging QSOs via an external application like JTAlert or MultiPSK, it is responsible for all of the content of the QSO being logged.

+ DXView does provide a lookup service that such applications can use to determine a callsign's LoTW participation, among other things.

73,

Dave, AA6YQ

I am using the ic-7300, Windows 10 with DXLab.
Problem I am not able to get the Spectrum to display the signals.
I beleive the problem is in my comport settings.
In control panel :
Com6 19200 USB-RTS01 Radio Cable.
Com7 115200 Silicon Labs CP210x USB to UART Bridge.

IC-7300 settings:
CI-V Baud Rate is 19200
CI-V USB Baud Rate is 115200

My question is what is the correct locations for these comports in Commander / Winwarbler and IC-7300? What is the correct speed for each comport?

73,
Art WB4MNK

* more AA6YQ comments below

With JTAlert.

* On the "JTAlertX Settings" window, use the panel on the left to navigate to the "LoTW/eQSL(AG) Flags" page in the Alerts/"Miscellaneous Alerts" section.

* Note the requirement for the presence of the "HamApps Callsign Database" at the top of the panel on the right.

* In the "Enable Membership Indicators" section of the panel on the right, check the "Enable LoTW Stripe/Flag" box. I assume that JTAlertX will then include LoTW membership status in each QSO it logs to DXKeeper. If that's not the case, we'll have to ask Laurie VK3AMA for help.

73,

Dave, AA6YQ

+ AA6YQ comments below

When I log an FT8 QSO now it does not update the LotW membership status of the station worked.

+ Are you using JTAlert, or the direct interoperation between WSJT-X and DXLab?

73,

Dave, AA6YQ

Thanks for sending me your log file, Jeff.

You have 7 logged QSOs whose callsigns begin with an explanation point (!), meaning "ignore these QSOs for award tracking".

To see these QSOs, filter the Log Page Display with the SQL expression

Call like '!*'

On the Main window's "Export QSOs" tab, there's an "Export callsigns with leading !" option on the right side; you evidently have this option disabled, which is why your exported ADIF file contained 7 less QSOs than your log.

73,

Dave, AA6YQ

+ AA6YQ comments below

Tnx Dave, very informative. Hard to get used to a new way of thinking.

+ Yes, it's a challenge for everyone coming to DXLab from another application.

I have gone to the PropView approach. Much more powerful

...and I have been searching/reading as much as I can, but the docs are so extensive that it takes quite a bit of study to absorb what is needed, even for the most elementary process.

+ Drinking from a fire hose is neither effective nor pleasant. I suggest a lazy scan of each application's reference documentation, ignoring all detail, but taking note of functionality that you might be interested in exploring. When your scan is complete, prioritize the list of functions-to-be-explored-later, select the highest priority function, and return to the reference documentation for details; also check for step-by-step instructions in "Getting Started with DXLab". When you're satisfied with the function, cross it off the list, reprioritize, and repeat the process.

73,

Dave, AA6YQ

开云体育

+ AA6YQ comments below

开云体育

开云体育

--

W0MN EN34rb 44.08226 N 92.51265 W

Hierro candente, batir de repente

HP Laptop