Re: PRINTER RECOMMENDATIONS (Related OT Question)
The rule is as Iain pointed out - I had a conversation with someone
about 6 months ago at ARRL HQ about it. I have gotten a rare
occasional card for a US station that was not for my DX calls
however. Probably just slipped through.
73, Larry? W6NWS
On 2/27/2016 12:35 PM, 'Dave AA6YQ'
aa6yq@... [dxlab] wrote:
toggle quoted message
Show quoted text
?
+++ More AA6YQ
comments below
?
Ok, Dave, but then link you
provided said you could not.? Thanks for checking.
?
+++ If the
rules say you can’t, then you can’t. Perhaps, as
Iain N6ML suggested, I was remembering
confirmations I sent via the buro for 8P9RY QSOs.
?
?????? 73,
?
??????????????
Dave, AA6YQ
?
|
Re: Tracking most recent eQSL dates in DXK with multiple profiles
Nicknames are a way for eQSL to distinguish between two accounts
with the same callsign. You will need that if you ever move to a new
location and keep the same call. This can also be important if a
call is ever or was ever issued to a different person. For example
my call once belonged to a person named Ed who lived somewhere in
PA. It was reissued to me in 1999. My old call, N2RD, now belongs to
a person in New York.
73, Rich - W3ZJ
On 2/27/2016 4:16 PM, 'Dave AA6YQ'
aa6yq@... [dxlab] wrote:
toggle quoted message
Show quoted text
As
far as I know, the “best” documentation is at
, which is the eQSL FAQ on changing callsigns, where it is
indicated that one should “create an ‘attached account’ for
the new callsign”.? The DXK documentation also touches on
the subject when it comes to attempting to use DXK Locations
to filter for record relevant to a particular eQSL nickname.
?
+++
Thanks! My understanding is the “Nicknames” are a way to
manage operation from multiple locations with the same
“Station Callsign”, not a way to manage operation with
multiple “Station Callsigns” from within the same DXCC
entity. Correct?
?
So,
for example, on 14 August 2012, my callsign changed from
AB1OD to N1EN.
?
I
therefore have two logins on eQSL: AB1OD and N1EN.
?
If
I want to check eQSL confirmations for AB1OD in DXK, I edit
the eQSL login information in DXK to AB1OD, and sync QSLs.
If
I want to check eQSL confirmations for N1EN in DXK, I edit
the eQSL login information in DXK back to N1EN, and sync
QSLs
?
A
simple example of the cause of my question is as follows.
?
Assume
that I last received eQSL confirmations to AB1OD dated 31
December.
Assume
that I last received eQSL confirmations to N1EN dated 20
February.
?
If
I simply change my eQSL login to ?AB1OD and sync QSLs, DXK
will query eQSL for all eQSLs to AB1OD between 20 February
and the present.?? I will miss any eQSLs received between 31
December and 20 February under current DXK behavior.
?
+++
So you’re not logging new QSOs as AB1OD, you’re just dealing
with the occasional “late uploader”.
?
Thus,
I end up control-clicking “sync” more frequently than
perhaps was intended, to cover those gaps.
?
+++
If you double-click the date-time displayed beneath “Sync
eQSL.cc QSLs” button, a small window appears that lets you
specify a date and time. If you manually keep track of the
“last sync time” for each of your eQSL.cc accounts, you can
avoid control-clicking the Sync button.
?
It
looks like the DXK database has a single record/field to
hold the date of the most recent eQSL received.
?
I
wonder if it would be better to store that information in a
separate, small table, tracking most recent eQSL on a
by-eQSL-login basis, so that (in my example above) DXK would
know to query back to 31 December if I were logging in as
AB1OD, but only to 20 February if I were logging in as N1EN.
?
That
being said…if I’m the only person that’s asked about this,
maybe I’ve missed something OR maybe my situation is unique
enough to not merit the change. ??
?
+++
?To do what you suggest, DXKeeper would have to store a
username (“Station Callsign”), password, and “last sync
date” for each eQSL account, and provide a means for you to
select the account you’re about to synchronize – or to which
you’ll be uploading QSOs (either as each QSO is logged, or
in a batch). That would likely be implemented as a
scrollable table on the “QSL Configuration” window’s eQSL
tab, and an account selector in the “eQSL.cc operations”
panel at the bottom of the Main window’s QSL tab.
?
+++
How many eQSL users here have multiple active “station
callsigns” in the same DXCC entity? ?????
?
?????
73,
?
??????????????
Dave, AA6YQ
|
Re: Tracking most recent eQSL dates in DXK with multiple profiles
Dave –
?
Double-clicking the date under the sync button is functionality I wasn’t previously aware of.? It’s sufficient for my needs…and I would venture a guess that there aren’t enough
folks who need more than that to justify additional development.? Thank-you.
?
As to your other questions/comments:
?
Re nicknames – your updated understanding matches mine, but I should disclose I haven’t yet had a real need to explore eQSL’s nickname functionality (although that day is coming)
?
Re dealing with “late uploader” and number of folks with a possible need beyond that – you are correct in that the scenario I described is to deal with late uploads.? I could
see someone (or a club) who regularly has multiple portable operations, requiring multiple portable indicators (e.g. W1AW portable operations during the Centennial year) as having a bigger challenge. However, I’m not certain how many eQSL users have such complex
needs, much less how many of them use DXK. This complexity seems to be a shortcoming of eQSL’s.
?
--
Michael Adams
| N1EN
| mda@...
|
Re: Tracking most recent eQSL dates in DXK with multiple profiles
+++ More AA6YQ comments below ?
toggle quoted message
Show quoted text
From: dxlab@... [mailto:dxlab@...]
Sent: Saturday, February 27, 2016 2:52 PM
To: dxlab@...
Subject: RE: [dxlab] Tracking most recent eQSL dates in DXK with multiple profiles? ? As far as I know, the “best” documentation is at , which is the eQSL FAQ on changing callsigns, where it is indicated that one should “create an ‘attached account’ for the new callsign”.? The DXK documentation also touches on the subject when it comes to attempting to use DXK Locations to filter for record relevant to a particular eQSL nickname. ? +++ Thanks! My understanding is the “Nicknames” are a way to manage operation from multiple locations with the same “Station Callsign”, not a way to manage operation with multiple “Station Callsigns” from within the same DXCC entity. Correct? ? So, for example, on 14 August 2012, my callsign changed from AB1OD to N1EN. ? I therefore have two logins on eQSL: AB1OD and N1EN. ? If I want to check eQSL confirmations for AB1OD in DXK, I edit the eQSL login information in DXK to AB1OD, and sync QSLs. If I want to check eQSL confirmations for N1EN in DXK, I edit the eQSL login information in DXK back to N1EN, and sync QSLs ? A simple example of the cause of my question is as follows. ? Assume that I last received eQSL confirmations to AB1OD dated 31 December. Assume that I last received eQSL confirmations to N1EN dated 20 February. ? If I simply change my eQSL login to ?AB1OD and sync QSLs, DXK will query eQSL for all eQSLs to AB1OD between 20 February and the present.?? I will miss any eQSLs received between 31 December and 20 February under current DXK behavior. ? +++ So you’re not logging new QSOs as AB1OD, you’re just dealing with the occasional “late uploader”. ? Thus, I end up control-clicking “sync” more frequently than perhaps was intended, to cover those gaps. ? +++ If you double-click the date-time displayed beneath “Sync eQSL.cc QSLs” button, a small window appears that lets you specify a date and time. If you manually keep track of the “last sync time” for each of your eQSL.cc accounts, you can avoid control-clicking the Sync button. ? It looks like the DXK database has a single record/field to hold the date of the most recent eQSL received. ? I wonder if it would be better to store that information in a separate, small table, tracking most recent eQSL on a by-eQSL-login basis, so that (in my example above) DXK would know to query back to 31 December if I were logging in as AB1OD, but only to 20 February if I were logging in as N1EN. ? That being said…if I’m the only person that’s asked about this, maybe I’ve missed something OR maybe my situation is unique enough to not merit the change. ?? ? +++ ?To do what you suggest, DXKeeper would have to store a username (“Station Callsign”), password, and “last sync date” for each eQSL account, and provide a means for you to select the account you’re about to synchronize – or to which you’ll be uploading QSOs (either as each QSO is logged, or in a batch). That would likely be implemented as a scrollable table on the “QSL Configuration” window’s eQSL tab, and an account selector in the “eQSL.cc operations” panel at the bottom of the Main window’s QSL tab. ? +++ How many eQSL users here have multiple active “station callsigns” in the same DXCC entity? ????? ? ????? 73, ? ?????????????? Dave, AA6YQ
|
Re: Slow Loading DXKeeper
toggle quoted message
Show quoted text
From: dxlab@... [mailto:dxlab@...]
Sent: Saturday, February 27, 2016 2:31 PM
To: dxlab@...
Subject: [dxlab] Slow Loading DXKeeperAll of a sudden DXKeeper is taking around 2 minutes to load. ?Same computer, no other programs running, any ideas? >>>Yes: that’s almost certainly your firewall or one of your anti-malware applications. See
????? 73, ??????????????? Dave, AA6YQ
|
Re: Tracking most recent eQSL dates in DXK with multiple profiles
Dave –
?
As far as I know, the “best” documentation is at
, which is the eQSL FAQ on changing callsigns, where it is indicated that one should “create an ‘attached account’ for the new callsign”.?
The DXK documentation also touches on the subject when it comes to attempting to use DXK Locations to filter for record relevant to a particular eQSL nickname.
?
So, for example, on 14 August 2012, my callsign changed from AB1OD to N1EN.
?
I therefore have two logins on eQSL: AB1OD and N1EN.
?
If I want to check eQSL confirmations for AB1OD in DXK, I edit the eQSL login information in DXK to AB1OD, and sync QSLs.
If I want to check eQSL confirmations for N1EN in DXK, I edit the eQSL login information in DXK back to N1EN, and sync QSLs
?
A simple example of the cause of my question is as follows.
?
Assume that I last received eQSL confirmations to AB1OD dated 31 December.
Assume that I last received eQSL confirmations to N1EN dated 20 February.
?
If I simply change my eQSL login to ?AB1OD and sync QSLs, DXK will query eQSL for all eQSLs to AB1OD between 20 February and the present.?? I will miss any eQSLs received between
31 December and 20 February under current DXK behavior.
?
Thus, I end up control-clicking “sync” more frequently than perhaps was intended, to cover those gaps.
?
It looks like the DXK database has a single record/field to hold the date of the most recent eQSL received.
?
I wonder if it would be better to store that information in a separate, small table, tracking most recent eQSL on a by-eQSL-login basis, so that (in my example above) DXK would
know to query back to 31 December if I were logging in as AB1OD, but only to 20 February if I were logging in as N1EN.
?
That being said…if I’m the only person that’s asked about this, maybe I’ve missed something OR maybe my situation is unique enough to not merit the change. ??J
?
--
Michael Adams
| N1EN
| mda@...
?
>>>I have not gained a clear enough understanding of how multiple eQSL accounts and “nicknames” work to know what’s needed, or to determine whether what’s
needed is feasible. If there’s documentation describing multiple eQSL accounts and “nicknames”, please point me at it.
|
All of a sudden DXKeeper is taking around 2 minutes to load. ?Same computer, no other programs running, any ideas?
All other programs (including other DXLAB ones) seem to load normally.
Thanks,
Jim ZF2LC
|
Re: DXView Starts Maximized -- resolved
OK I think I’ve gotten it to work.? I had launcher minimize all running applications then I started task manager and killed them all.? When all the module indicators were red on launcher, I saved the settings.? I quit launcher. ? Now I restarted launcher and the apps with the start command (as I always do) and voila, DXV is now starting minimized. ? ?
toggle quoted message
Show quoted text
From: dxlab@... [mailto:dxlab@...]
Sent: Saturday, February 27, 2016 10:06 AM
To: dxlab@...
Subject: RE: [dxlab] DXView Starts Maximized? ? >>>AA6YQ comments below ? I made sure to save the settings with it minimized. ? >>>When DXView starts up, it determines whether or not to start “minimized” based on a setting in the Windows Registry. Since DXView starts minimized when you don’t load settings from your Workspace, the implication is that the setting in your Workspace is not “minimized”. ? ????? 73, ? ???????????? Dave, AA6YQ
|
Re: PRINTER RECOMMENDATIONS (Related OT Question)
The ARRL Outgoing QSL system is for NON USA qsls cards only.
On 2/27/2016 11:21, 'Dave AA6YQ'
aa6yq@... [dxlab] wrote:
>>>AA6YQ
comments below
?
You can not send cards for U.S.
stations through the ARRL Outgoing QSL Service.?
?
>>>I’m
pretty sure I’ve done so, Goose. I’ll ask the next time
I’m in Newington.
?
??????
73,
?
???????????????
Dave, AA6YQ
--
In beautiful downtown Harwood Hts. IL
|
Re: PRINTER RECOMMENDATIONS (Related OT Question)
+++ More AA6YQ comments below ?
toggle quoted message
Show quoted text
From: dxlab@... [mailto:dxlab@...]
Sent: Saturday, February 27, 2016 12:26 PM
To: dxlab@...
Subject: Re: [dxlab] PRINTER RECOMMENDATIONS (Related OT Question)Ok, Dave, but then link you provided said you could not.? Thanks for checking. ? +++ If the rules say you can’t, then you can’t. Perhaps, as Iain N6ML suggested, I was remembering confirmations I sent via the buro for 8P9RY QSOs. ? ?????? 73, ? ?????????????? Dave, AA6YQ ?
|
Re: PRINTER RECOMMENDATIONS (Related OT Question)
Ok, Dave, but then link you provided said you could not.? Thanks for checking.
73......de Goose, W8AV
Sent from my Verizon Wireless 4G LTE DROID "'Dave AA6YQ' aa6yq@... [dxlab]" <dxlab@...> wrote:
From: dxlab@... [mailto:dxlab@...]
Sent: Saturday, February 27, 2016 12:18 PM
To: dxlab@...
Subject: Re: [dxlab] PRINTER RECOMMENDATIONS (Related OT Question)
You can not send cards for U.S. stations through the ARRL Outgoing QSL Service.? ? >>>I’m pretty sure I’ve done so, Goose. I’ll ask the next time I’m in Newington. ? ?????? 73, ? ??????????????? Dave, AA6YQ
|
Re: PRINTER RECOMMENDATIONS (Related OT Question)
From the FAQ at : "Question: Can I QSL US Amateurs through the Bureau system? Answer: No you cannot send cards to other US hams through the Bureau UNLESS you or the other station was DX at the time and your QSL card indicates this. (ex. you make a contact with XE/K1TLK or you are in Mexico and your QSL card indicates that is where you were at the time of the contact.) Note: DX means anything outside the 48 contiguous states, which means you can send cards for Alaskan and Hawaiian calls as well as those for US territories or military bases through the outgoing bureau. (The prefixes for these areas are as follows: All AL, KL, NL, WL, AH, KH, NH, WH, KP, NP, WP calls as wells as KG4x2 calls (ex. KG2SV), KA6x2 calls and KA2x2 calls.) Please refer to the "Countries Not Served" list on the Outgoing QSL Service information sheet because there are a few US territories we can not forward to." So it'd be OK for 8P9RY, but not AA6YQ. 73, ~iain / N6ML On Sat, Feb 27, 2016 at 9:21 AM, 'Dave AA6YQ' aa6yq@... [dxlab] <dxlab@...> wrote:
AA6YQ comments below
From: dxlab@... [mailto:dxlab@...]
Sent: Saturday, February 27, 2016 12:18 PM
To: dxlab@...
Subject: Re: [dxlab] PRINTER RECOMMENDATIONS (Related OT Question)
You can not send cards for U.S. stations through the ARRL Outgoing QSL Service.
I’m pretty sure I’ve done so, Goose. I’ll ask the next time I’m in Newington.
73,
Dave, AA6YQ
|
Re: PRINTER RECOMMENDATIONS (Related OT Question)
toggle quoted message
Show quoted text
From: dxlab@... [mailto:dxlab@...]
Sent: Saturday, February 27, 2016 12:18 PM
To: dxlab@...
Subject: Re: [dxlab] PRINTER RECOMMENDATIONS (Related OT Question)
You can not send cards for U.S. stations through the ARRL Outgoing QSL Service.? ? >>>I’m pretty sure I’ve done so, Goose. I’ll ask the next time I’m in Newington. ? ?????? 73, ? ??????????????? Dave, AA6YQ
|
Re: PRINTER RECOMMENDATIONS (Related OT Question)
You can not send cards for U.S. stations through the ARRL Outgoing QSL Service.? There is one exception.? If the DX station has a U.S. QSL manager, you can use the ARRL Outgoing QSL Service to forward the cards to the domestic manager.
73............de Goose, W8AV
Sent from my Verizon Wireless 4G LTE DROID "'Dave AA6YQ' aa6yq@... [dxlab]" <dxlab@...> wrote: >>>AA6YQ comments below
-----Original Message----- From: dxlab@... [mailto:dxlab@...] Sent: Saturday, February 27, 2016 11:10 AM To: dxlab@... Subject: Re: [dxlab] PRINTER RECOMMENDATIONS (Related OT Question) Hi Folks: A related question here -- I understand using buro cards for DX (from the US) but is there a way to do buro cards within the usa also?? I have some I'll be sending direct, but I also have a bunch that I just want to send buro cards to +++ Yes: see the "Outgoing QSL Service" section of <http://www.arrl.org/outgoing-qsl-service> ????? 73, ????????????? Dave, AA6YQ ------------------------------------ Posted by: "Dave AA6YQ" <aa6yq@...> ------------------------------------ ------------------------------------ Yahoo Groups Links <*> To visit your group on the web, go to: ??? http://groups.yahoo.com/group/dxlab/ <*> Your email settings: ??? Individual Email | Traditional <*> To change settings online go to: ??? http://groups.yahoo.com/group/dxlab/join ??? (Yahoo! ID required) <*> To change settings via email: ??? dxlab-digest@... ??? dxlab-fullfeatured@... <*> To unsubscribe from this group, send an email to: ??? dxlab-unsubscribe@... <*> Your use of Yahoo Groups is subject to: ??? https://info.yahoo.com/legal/us/yahoo/utos/terms/
|
Re: /P /QRP setup and other Question
I think you are talking about logging on to eQSL via a Web Browser.
I am talking about setting the Username/Password/QTH Nickname in
DXKeeper's eQSL Configuration Panel where the username is
K3JAE/QRP,? K3JAE/P, etc. You should not be logged on to eQSL via a
web browser at all.
73, Rich - W3ZJ
On 2/27/2016 10:49 AM, 'John Etling'
john@... [dxlab] wrote:
toggle quoted message
Show quoted text
Sorry to be so dense here Rich… How do I determine the proper log-in? I am using the same user/pass on eQSL site and then just pick which account I want to view. So how do I log into a specific account from outside eQSL’s login portal? Specifically how do I set up DXKeeper to upload and sync to eQSL to/from the /QRP account?
|
Re: PRINTER RECOMMENDATIONS (Related OT Question)
AA6YQ comments below
-----Original Message----- From: dxlab@... [mailto:dxlab@...] Sent: Saturday, February 27, 2016 11:10 AM To: dxlab@... Subject: Re: [dxlab] PRINTER RECOMMENDATIONS (Related OT Question) Hi Folks: A related question here -- I understand using buro cards for DX (from the US) but is there a way to do buro cards within the usa also? I have some I'll be sending direct, but I also have a bunch that I just want to send buro cards to +++ Yes: see the "Outgoing QSL Service" section of <> 73, Dave, AA6YQ
|
I read you emails, and would like to offer to help.
I have a flex6500, and have full control of the radio via Commander.
I also use DDUt which helps with the com ports used.
Right now I'm operating WSJT-x which is on one monitor.
Commander-DXView-SpotCollector-Pathfinder-Propview-DXView are also
displayed.
I can click on any spot in SpotCollector and the rig will qsy to
that frequency, and the rig will change to the correct mode and
filter size.
I no longer have an amp, but when I did, a cluster spot activated
qsy would automatically change the Quadra amp to the correct band.
But let's try one step at a time.
Here is a screen shot of my current operating conditions
This should give you a starting point, to check that you have the
rig's IP addy correct
And here is my Commander Config settings. The main part to check is
the Radio settings. Make sure your radios SN and other data are
correct for your computer.
It must be something simple as rig control via DXLabs and other
software is totally successful and rarely does anyone have a
'connection' problem with any of the other logging programs or
contesting programs.
good luck
Bill, W9OL
--
In beautiful downtown Harwood Hts. IL
|
Re: /P /QRP setup and other Question
Larry –
Bingo – DOOOOH, I never put the /QRP on the login... so... you also get a gold star!
Thanks!
… I’m just sayin’
73 de K3JAE
John Etling
<mailto:k3jae@...> k3jae@...
From: Larry w6nws@... [dxlab] [mailto:dxlab@...]
Sent: Saturday, February 27, 2016 10:02
To: dxlab@...
Subject: Re: [dxlab] /P /QRP setup and other Question
Login with K3JAE/QRP (assuming that is what you registered with) and its associated password. Your other account I assume might be just K3JAE.
73, Larry W6NWS
On 2/27/2016 10:49 AM, 'John Etling' john@... <mailto:john@...> [dxlab] wrote:
Sorry to be so dense here Rich… How do I determine the proper log-in? I am using the same user/pass on eQSL site and then just pick which account I want to view. So how do I log into a specific account from outside eQSL’s login portal? Specifically how do I set up DXKeeper to upload and sync to eQSL to/from the /QRP account?
… I’m just sayin’
73 de K3JAE
John Etling
<mailto:k3jae@...> <mailto:k3jae@...> k3jae@... <mailto:k3jae@...>
070 #1820 LONP #321
PODXS 070 – Nobody Special – Just a Member
From: Rich - W3ZJ rich@... <mailto:rich@...> [dxlab] [mailto:dxlab@...]
Sent: Saturday, February 27, 2016 09:20
To: dxlab@... <mailto:dxlab@...>
Subject: Re: [dxlab] /P /QRP setup and other Question
That's the problem. It's a separate account so you must have a username and password for it. Even if the passwords are the same the logins are different.
As I think of it now it is similar for LoTW except that you don't need a separate account just a separate certificate. Of course, the uploads must be signed with the appropriate certificate so you still need to do a separate upload for each call.
73, Rich - W3ZJ
On 2/27/2016 10:01 AM, 'John Etling' john@... <mailto:john@...> <mailto:john@...> <mailto:john@...> [dxlab] wrote:
It is stating I do not have a username and pass for that account? Is it not the same as the primary account? I also am unable to upload QSO’s made from DXKeeper. What am I screwing up?
[Non-text portions of this message have been removed]
|
Re: PRINTER RECOMMENDATIONS (Related OT Question)
Hi Folks:
A related question here -- I understand using buro cards for DX (from the US) but is there a way to do buro cards within the usa also? I have some I'll be sending direct, but I also have a bunch that I just want to send buro cards to
TIM
W8TAH
toggle quoted message
Show quoted text
On 2/26/2016 9:41 PM, K4ia K4IA@... [dxlab] wrote: I like cards so, at 13 cents and no hassles, I QSL everybody
Buck
k4ia K3 #101
Honor Roll 333
8B DXCC
On 2/26/2016 9:23 PM, Danny Douglas n7dc@... [dxlab] wrote:
>
>
> Figured that would be the case. Yeah, the only thing better (besides
> easier to do the outgoing) is the time. I suspect, with Global they
> might even send them out faster than the buro does from ARRL. The
> faster out, the faster in, or so saything the Sun gods. I might try
> that on a batch here shortly. These days, I am just answering incoming
> cards, since pretty much worked everyone needed on the bands, and if
> something comes up I do need, it will be DIRECT anyway. Certainly
> cheaper than buying ink every other month, and easier than cutting up
> card stock here, the way I do it now. I have always made my own from
> this QTH, but it is getting far and few between when I get around to
it now.
>
> ----------------------------------------------------------
> *From: *"K4ia K4IA@... [dxlab]" <dxlab@...>
> *To: *dxlab@...
> *Sent: *Friday, February 26, 2016 9:15:32 PM
> *Subject: *Re: [dxlab] PRINTER RECOMMENDATIONS
>
> I don't notice any difference between Global and when I did it all
> myself. Actually I upload to Global more often because I don't have to
> wait for a big batch and I don't have to find the time to do all the
> sorting etc to send to ARRL. So maybe the Global way is faster. The
> receiving DX has no way of knowing how he got the card. It just comes
> through his buro like before.
>
> Buck
> k4ia K3 #101
> Honor Roll 333
> 8B DXCC
>
> On 2/26/2016 8:06 PM, Danny Douglas n7dc@... [dxlab] wrote:
> >
> >
> > I dont mind much as to how long they take to get herre, just that they
> > do. But still wondering wht the precentages are via global.
> >
> > ----------------------------------------------------------
> > *From: *"'Buck. K4ia' K4IA@... [dxlab]" <dxlab@...>
> > *To: *dxlab@...
> > *Sent: *Friday, February 26, 2016 7:09:15 PM
> > *Subject: *Re: [dxlab] PRINTER RECOMMENDATIONS
> >
> >
> > You can't blame Global if someone decides to stop answering buro cards
> > or if your buro takes forever to get to you. At 13 cents a card I can't
> > get too upset if they don't respond
> >
> >
> >
> > K4ia
> > Buck
> >
> >
> > -------- Original message --------
> > From: "Danny Douglas n7dc@... [dxlab]" <dxlab@...>
> > Date: 2/26/2016 15:32 (GMT-05:00)
> > To: Stephen <dxlab@...>
> > Subject: Re: [dxlab] PRINTER RECOMMENDATIONS
> >
> > Buck, had thought about doing that too, But, I see more and more
> > notices about this guy and that guy, no longer responding to Buro
cards,
> > and wonder just how much waste of money and time it is to try that way.
> > Any idea as to the percentages of outgoing for which you eventually get
> > a response?
> >
> > ----------------------------------------------------------
> > *From: *"Buck K4IA@... [dxlab]" <dxlab@...>
> > *To: *dxlab@...
> > *Sent: *Friday, February 26, 2016 11:34:33 AM
> > *Subject: *Re: [dxlab] PRINTER RECOMMENDATIONS
> >
> > I would heartily recommend GlobalQSL.com for bureau cards. They print
> > your full-color custom-designed card, including the QSO information and
> > ship it to the foreign bureau for about 13 cents a card. DxLab will
> > generate the ADIF file you send to them. You can upload hundreds of
> > QSLs within a few minutes. No fuss, no muss, no printing, no ink, no
> > labels, no postage, no sorting and you don't have to be an ARRL member.
> >
> > K4ia
> > Buck
> > Honor Roll 334
> > 8BDXCC
> >
> > On 2/26/2016 11:01 AM, ' Dave AA6YQ' aa6yq@... [dxlab] wrote:
> > > I've been happily using an HP LaserJet 200 M251 to print QSL cards.
> > >
> > > Welcome back, Jose!
> > >
> > > 73,
> > >
> > > Dave, AA6YQ
> > >
> > > -----Original Message-----
> > > From: dxlab@... [mailto:dxlab@...]
> > > Sent: Friday, February 26, 2016 8:32 AM
> > > To: dxlab@...
> > > Subject: [dxlab] PRINTER RECOMMENDATIONS
> > >
> > >
> > >
> > > Good Morning,
> > >
> > >
> > >
> > > I know I have seen this thread before, but alas, I am unable to
> > locate it.
> > >
> > > I am finally getting station back together and still fighting my
> > township for towers…but …
> > >
> > > In preparation for returning to the airwaves, I am catching up on QSL
> > cards.
> > >
> > >
> > >
> > > My Lexmark Optra S 1855 (best QSL printer I have ever used) has
> > retired and I need to replace it.
> > >
> > >
> > >
> > > I process a LOT of QSL cards and like to print DIRECTON ON the back
> > of my QSLs cards (not labels).
> > >
> > > I EXPORT my QSO data from DXLab Suite to BV7 to print up to 18 QSOs
> > on the back of each QSL (if needed J).
> > >
> > >
> > >
> > > If anyone prints directly on QSL cards, I would like to hear from you
> > regarding what printer you are using.
> > >
> > > I prefer to be able to front load my QSL cards.
> > >
> > >
> > >
> > > Comments and suggestions more than welcome!
> > >
> > >
> > >
> > > Thanks Team!
> > >
> > >
> > >
> > > Jose – N4BAA
> > >
> > > Ex: KG4SB, YI9BAA, VP5BAX, N1BAA, WD4LAH
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > ------------------------------------
> > > Posted by: " Dave AA6YQ" <aa6yq@...>
> > > ------------------------------------
> > >
> > >
> > > ------------------------------------
> > >
> > > Yahoo Groups Links
> > >
> > >
> > >
> >
> >
> >
> >
> >
> >
> >
> >
> >
>
>
>
>
>
|
Re: /P /QRP setup and other Question
Login with K3JAE/QRP (assuming that is what you registered with) and
its associated password. Your other account I assume might be just
K3JAE.
73, Larry? W6NWS
On 2/27/2016 10:49 AM, 'John Etling'
john@... [dxlab] wrote:
toggle quoted message
Show quoted text
?
Sorry to be so dense here Rich… How do I determine the
proper log-in? I am using the same user/pass on eQSL site
and then just pick which account I want to view. So how do
I log into a specific account from outside eQSL’s login
portal? Specifically how do I set up DXKeeper to upload
and sync to eQSL to/from the /QRP account?
… I’m just sayin’
73 de K3JAE
John Etling
k3jae@...
070 #1820 LONP #321
PODXS 070 – Nobody Special – Just a Member
From: Rich - W3ZJ rich@... [dxlab]
[mailto:dxlab@...]
Sent: Saturday, February 27, 2016 09:20
To: dxlab@...
Subject: Re: [dxlab] /P /QRP setup and other Question
That's the problem. It's a separate account so you must
have a username and password for it. Even if the passwords
are the same the logins are different.
As I think of it now it is similar for LoTW except that
you don't need a separate account just a separate
certificate. Of course, the uploads must be signed with
the appropriate certificate so you still need to do a
separate upload for each call.
73, Rich - W3ZJ
On 2/27/2016 10:01 AM, 'John Etling' john@...
[dxlab] wrote:
It is stating I do not have a username and pass for that
account? Is it not the same as the primary account? I also
am unable to upload QSO’s made from DXKeeper. What am I
screwing up?
|
Michael (N1EN)
Pete W1RM
iain macdonnell