开云体育

The prefix will appear in the prediction graph title if (and only if) you established the receiver location by entering a prefix in DXView. If you select a lat/lon by clicking on DXView's map, or by

meanwhile I just pointed to my QTH on the map, fine tuned a little and it works well. It helps that I live right next to a great lake, easy to spot on the world map.

This release corrects the defect that prevents direct entry of QTH latitude and longitude in the Configuration window's General tab. If you've already installed DXView, you can upgrade by

And if the Lat/Lon is for a boat in the middle of the Pacific, what's the prefix? Good trick if you could do it :-) ---- 73, Rich - W3ZJ

Sorry a mastake from my site about prefix etc. I am to fast with make a e mail about something i must look first before ask and mailing. Let we think thats Europe same on the band if there is DX

Starting DXView 1.2.8 while DXKeeper is already running fails to establish communications between the two. One has to shut down DXKeeper and restart it to establish the connection. ----- 73, Rich -

I just tried this several times without failure. I did "improve" the code in this area for 1.2.7, so a regression may have been introduced. I'll check it out on a few other configurations and inspect

Hmm, I can't replicate this one either. Are you doing anything in particular between the first lookup and the correction to the callsign? Does it fail every time? 73, Dave, AA6YQ

Yup, every time. I tried shutting down all other applications to see if that had any affect - it didn't. 1) Type W7JJ into the capture window (a fictitious call sign, not in log) and press enter. 2)

OK, a little more info on this one. It works OK as long as PropView is not running. With PropView running it fails. 73, Rich - W3ZJ

A little more info on this one. If the original callsign is in the log, there is no problem. It's only when the callsign is not there and the log display screen is empty after pressing enter. In

Hello Dave, Just to let you know that here everything is now working fine, DXview and Propview, no problems anymore to enter new coordinates Thanks Best 73 Ben ON5GQ **** Bernard Backaert Amateur

DXkeeper does not remember from one session to the next that I have turned off "Show control explanations" ----- 73, Rich - W3ZJ www.w3zj.com

This release corrects the defect responsible for generating a runtime error if DXView is not installed. You can upgrade to PropView 1.0.5 by downloading and

Will be fixed in 1.2.3. 73, Dave, AA6YQ

Dave, This does not correct the problem where the connection between DXKeeper and DXView is not established when you start DXView after both DXKeeper and PropView are already running. I also have

-Dave is it posible to make a second button on the window at GO in DXView? this button can copy the call to DXKeeper and so you can use it direct now i must type the call again in DXKeeper also i

Certainly. But I'd like to track down and correct the DXView-PropView- DXKeeper interaction problem, as well as the DXKeeper "misbehaviour" issue first. Unfortunately, I have an XYL-driven furniture

Oh! I suspect that most of us are well aware that you can only put off the honey do issues for just so long before the roof caves in :-)) ------ 73, Rich - W3ZJ

I am running CI-V Commander version 1.2.2 using the KG7SG interface I just made. I am able to control the ICOM 746 via the computer but I am not able to receive any data from the radio. I have