开云体育

-----Original Message-----
From: dxlab@... [mailto:dxlab@...]On Behalf Of Joe
Subich, W4TV
Sent: Friday, December 04, 2009 1:44 PM
To: dxlab@...
Subject: RE: [dxlab] FLDIGI




George,

The fldigi to DXLab Bridge is available from N2AMG:
The update or full version can be downloaded from

> Also while I am here how do you get rid of the
> password requirement for LOTW?

Information on removing a password from the LotW certificate can
be found in the DXLab WiKi section on LotW:


73,

... Joe, W4TV


> -----Original Message-----
> From: dxlab@... [mailto:dxlab@...] On
> Behalf Of at6c
> Sent: Friday, December 04, 2009 10:51 AM
> To: dxlab@...
> Subject: [dxlab] FLDIGI
>
>
> Dave, is there bridge software so that FLDIGI can be used
> with DXLab? Also while I am here how do you get rid of the
> password requirement for LOTW? Thanks, George W2GS
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>

-----Original Message-----
From: dxlab@... [mailto:dxlab@...]On Behalf Of
w7zz.doug
Sent: Friday, December 04, 2009 11:33 PM
To: dxlab@...
Subject: [dxlab] Re: User controlled buttons/sliders with Pro 3


Thanks. Didn't even know that the "files" section existed as I usually just
get a daily email digest. I've looked at a number of samples and will give
it a try using those as a starter.

W7ZZ

--- In dxlab@..., "aa6yq" <aa6yq@...> wrote:

There are several Icom sequence and slider definitions in this group's

Files area under "Command Sequences & Sliders".

If you need help applying the techniques used in these files to other Icom

functions, don't hesitate to post here.

73,

Dave, AA6YQ

--- In dxlab@..., "w7zz.doug" <w7zz@> wrote:

I am in the process of setting up DX Labs for use with a Pro 3. I have

used Ham Radio Deluxe in the past and love the predefined buttons/sliders.
I'd like to do the same thing with Commanders' user defined buttons/sliders.
I find the "programming" that is required to be a bit daunting and, while I
can probably figure it out, wonder if there are other Pro 3 owners/Commander
users out there in "radio land" who have already blazed the trail for me and
would be willing to email me off list with their list of commands, slider
data inputs, etc, so I could either copy them or at least have a jump start
on my own programming. Any help will be appreciated.

Thanks. Doug W7ZZ w7zz@

------------------------------------

Yahoo! Groups Links



No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.339 / Virus Database: 270.14.91/2542 - Release Date: 12/03/09
07:32:00

--- In dxlab@..., "aa6yq" <aa6yq@...> wrote:

There are several Icom sequence and slider definitions in this group's Files area under "Command Sequences & Sliders".

If you need help applying the techniques used in these files to other Icom functions, don't hesitate to post here.

73,

Dave, AA6YQ

--- In dxlab@..., "w7zz.doug" <w7zz@> wrote:

I am in the process of setting up DX Labs for use with a Pro 3. I have used Ham Radio Deluxe in the past and love the predefined buttons/sliders. I'd like to do the same thing with Commanders' user defined buttons/sliders. I find the "programming" that is required to be a bit daunting and, while I can probably figure it out, wonder if there are other Pro 3 owners/Commander users out there in "radio land" who have already blazed the trail for me and would be willing to email me off list with their list of commands, slider data inputs, etc, so I could either copy them or at least have a jump start on my own programming. Any help will be appreciated.
Thanks. Doug W7ZZ w7zz@

-----Original Message-----
From: dxlab@... [mailto:dxlab@...]On Behalf Of
Bob
Sent: Friday, December 04, 2009 2:38 PM
To: dxlab@...
Subject: [dxlab] Re: Problem with QRZ subscription service


Cliff

You have have got it. Hopefully if this is the case Dave can build in some
timeout or failsafe.

Bob

--- In dxlab@..., "Cliff Frescura" <cf@...> wrote:

If you do a manual lookup on OD5ET, you will notice that there are Arabic
characters in the name field. Perhaps that is causing the problem.



73,



Cliff K3LL



From: dxlab@... [mailto:dxlab@...] On Behalf Of

Bob

Sent: Friday, December 04, 2009 10:14 AM
To: dxlab@...
Subject: [dxlab] Re: Problem with QRZ subscription service





Hi Dave Here is a good one

QRZ subscription works on all calls tired except one.

If I put in OD5ET and click the RST box in the DXkeeper Capture window it
goes away and doesn't come back. Application remains as "unresponsive" and
has to be stopped with task manager.

Other ODs...not problem
Name and location was filled in from my log so I changed the callsign sign
in the log and the same problem occurred ie QRZ is causing it
Any other calls I tried no problem.

Just the response to a OD5ET lookup on the QRZ data service nails DXkeeper
(works okay on the pathfinder/qrz route)

Bob KB1JZU

--- In dxlab@... <mailto:dxlab%40yahoogroups.com> , "Bob"
<kb1jzu@> wrote:

Anyone see this problem...

Had DXKeeper lockup and become unresponsive when entering a contact into

the capture window. Did not time out and had to reboot to fix it.

After playing around it appears that my QRZ subcription service lookup

was

what was causing it and whatever it did , DXkeeper did not like it.

Changed the configuration lookup to the Pathfinder/QRZ choise and all

worked well. Tried the subscription again and it failed.

Still acting up as of 15z. Will try it again later in the day.

Bob KB1JZU

------------------------------------

Yahoo! Groups Links



No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.339 / Virus Database: 270.14.91/2542 - Release Date: 12/03/09
07:32:00

--- In dxlab@..., "w7zz.doug" <w7zz@...> wrote:

I am in the process of setting up DX Labs for use with a Pro 3. I have used Ham Radio Deluxe in the past and love the predefined buttons/sliders. I'd like to do the same thing with Commanders' user defined buttons/sliders. I find the "programming" that is required to be a bit daunting and, while I can probably figure it out, wonder if there are other Pro 3 owners/Commander users out there in "radio land" who have already blazed the trail for me and would be willing to email me off list with their list of commands, slider data inputs, etc, so I could either copy them or at least have a jump start on my own programming. Any help will be appreciated.
Thanks. Doug W7ZZ w7zz@...

----- Original Message -----
From: Dave AA6YQ
To: dxlab@...
Sent: Friday, December 04, 2009 7:10 PM
Subject: RE: [dxlab] Pathfinder not running!



What version of Pathfinder are you running, Danny? You'll find the version
number in the Main window's title bar.

73,

Dave, AA6YQ

-----Original Message-----
From: dxlab@... [mailto:dxlab@...]On Behalf Of
DANNY DOUGLAS
Sent: Friday, December 04, 2009 11:05 AM
To: dxlab@...
Subject: [dxlab] Pathfinder not running!

Every time that I double click on a spot on SC, I get the window "Callbook
error Required version of Pathfinder not running". Have closed both PF and
SC a couple or more times, and both are showing up as connected in each
others info in brackets at the top of their respective pages. When I click
on pathfinder in the launcher window, the PF window comes up with the
Pathfinder - a member of the DXKabs suite of free amateur radio software,
last search library update 29 Aug 2009 etc. When I put my own call on the
SC search call, in the PF box, and click on QRZ ubtton, QRZ.com comes up
correctly. Running the most updated update on all Lab programs. XP Pro,
etc.
Danny Douglas
N7DC
ex WN5QMX ET2US WA5UKR ET3USA SV0WPP VS6DD N7DC/YV5 G5CTB
All 2 years or more (except Novice). Short stints at: DA/PA/SU/HZ/7X/DU
CR9/7Y/KH7/5A/GW/GM/F
Pls QSL direct, buro, or LOTW preferred,
I Do not use, but as a courtesy do upload to eQSL for those who do.
Moderator
DXandTALK

Digital_modes


------------------------------------

Yahoo! Groups Links

No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.339 / Virus Database: 270.14.91/2542 - Release Date: 12/03/09
07:32:00

-----Original Message-----
From: dxlab@... <mailto:dxlab%40yahoogroups.com>
[mailto:dxlab@... <mailto:dxlab%40yahoogroups.com> ]On Behalf Of
Cliff Frescura
Sent: Friday, December 04, 2009 1:49 PM
To: dxlab@... <mailto:dxlab%40yahoogroups.com>
Subject: RE: [dxlab] Re: Problem with QRZ subscription service

If you do a manual lookup on OD5ET, you will notice that there are Arabic
characters in the name field. Perhaps that is causing the problem.

73,

Cliff K3LL

From: dxlab@... <mailto:dxlab%40yahoogroups.com>
[mailto:dxlab@... <mailto:dxlab%40yahoogroups.com> ] On Behalf
Of Bob
Sent: Friday, December 04, 2009 10:14 AM
To: dxlab@... <mailto:dxlab%40yahoogroups.com>
Subject: [dxlab] Re: Problem with QRZ subscription service

Hi Dave Here is a good one

QRZ subscription works on all calls tired except one.

If I put in OD5ET and click the RST box in the DXkeeper Capture window it
goes away and doesn't come back. Application remains as "unresponsive" and
has to be stopped with task manager.

Other ODs...not problem
Name and location was filled in from my log so I changed the callsign sign
in the log and the same problem occurred ie QRZ is causing it
Any other calls I tried no problem.

Just the response to a OD5ET lookup on the QRZ data service nails DXkeeper
(works okay on the pathfinder/qrz route)

Bob KB1JZU

--- In dxlab@... <mailto:dxlab%40yahoogroups.com>
<mailto:dxlab%40yahoogroups.com> , "Bob"
<kb1jzu@...> wrote:

Anyone see this problem...

Had DXKeeper lockup and become unresponsive when entering a contact into

the capture window. Did not time out and had to reboot to fix it.

After playing around it appears that my QRZ subcription service lookup was

what was causing it and whatever it did , DXkeeper did not like it.

Changed the configuration lookup to the Pathfinder/QRZ choise and all

worked well. Tried the subscription again and it failed.

Still acting up as of 15z. Will try it again later in the day.

Bob KB1JZU

------------------------------------

Yahoo! Groups Links

No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.339 / Virus Database: 270.14.91/2542 - Release Date: 12/03/09
07:32:00

-----Original Message-----
From: dxlab@... [mailto:dxlab@...]On Behalf Of
DANNY DOUGLAS
Sent: Friday, December 04, 2009 2:34 PM
To: dxlab@...
Subject: [dxlab] Pathlfinder not running


I should have finished the last note with the fact that this has happened

before, and clears up after some time. This time, I had to completely
close
out the dxlab suite, and start it over, and then the alarm no longer pops
up. This particular problem has popped up from time to time, but in the
last three days it happens, more often than not. Most of the time, I have
figured it was a timing thing, with the availability of the connection not
happening because something else was going on.

Danny Douglas
N7DC
ex WN5QMX ET2US WA5UKR ET3USA SV0WPP VS6DD N7DC/YV5 G5CTB
All 2 years or more (except Novice). Short stints at: DA/PA/SU/HZ/7X/DU
CR9/7Y/KH7/5A/GW/GM/F
Pls QSL direct, buro, or LOTW preferred,
I Do not use, but as a courtesy do upload to eQSL for those who do.
Moderator
DXandTALK

Digital_modes




------------------------------------

Yahoo! Groups Links



No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.339 / Virus Database: 270.14.91/2542 - Release Date: 12/03/09
07:32:00

-----Original Message-----
From: dxlab@... [mailto:dxlab@...]On Behalf Of
Bob
Sent: Friday, December 04, 2009 2:38 PM
To: dxlab@...
Subject: [dxlab] Re: Problem with QRZ subscription service


Cliff

You have have got it. Hopefully if this is the case Dave can build in some
timeout or failsafe.

Bob

--- In dxlab@..., "Cliff Frescura" <cf@...> wrote:

If you do a manual lookup on OD5ET, you will notice that there are Arabic
characters in the name field. Perhaps that is causing the problem.



73,



Cliff K3LL



From: dxlab@... [mailto:dxlab@...] On Behalf Of

Bob

Sent: Friday, December 04, 2009 10:14 AM
To: dxlab@...
Subject: [dxlab] Re: Problem with QRZ subscription service





Hi Dave Here is a good one

QRZ subscription works on all calls tired except one.

If I put in OD5ET and click the RST box in the DXkeeper Capture window it
goes away and doesn't come back. Application remains as "unresponsive" and
has to be stopped with task manager.

Other ODs...not problem
Name and location was filled in from my log so I changed the callsign sign
in the log and the same problem occurred ie QRZ is causing it
Any other calls I tried no problem.

Just the response to a OD5ET lookup on the QRZ data service nails DXkeeper
(works okay on the pathfinder/qrz route)

Bob KB1JZU

--- In dxlab@... <mailto:dxlab%40yahoogroups.com> , "Bob"
<kb1jzu@> wrote:

Anyone see this problem...

Had DXKeeper lockup and become unresponsive when entering a contact into

the capture window. Did not time out and had to reboot to fix it.

After playing around it appears that my QRZ subcription service lookup

was

what was causing it and whatever it did , DXkeeper did not like it.

Changed the configuration lookup to the Pathfinder/QRZ choise and all

worked well. Tried the subscription again and it failed.

Still acting up as of 15z. Will try it again later in the day.

Bob KB1JZU

------------------------------------

Yahoo! Groups Links



No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.339 / Virus Database: 270.14.91/2542 - Release Date: 12/03/09
07:32:00

-----Original Message-----
From: dxlab@... [mailto:dxlab@...]On Behalf Of
Cliff Frescura
Sent: Friday, December 04, 2009 1:49 PM
To: dxlab@...
Subject: RE: [dxlab] Re: Problem with QRZ subscription service


If you do a manual lookup on OD5ET, you will notice that there are Arabic
characters in the name field. Perhaps that is causing the problem.



73,



Cliff K3LL



From: dxlab@... [mailto:dxlab@...] On Behalf Of Bob
Sent: Friday, December 04, 2009 10:14 AM
To: dxlab@...
Subject: [dxlab] Re: Problem with QRZ subscription service





Hi Dave Here is a good one

QRZ subscription works on all calls tired except one.

If I put in OD5ET and click the RST box in the DXkeeper Capture window it
goes away and doesn't come back. Application remains as "unresponsive" and
has to be stopped with task manager.

Other ODs...not problem
Name and location was filled in from my log so I changed the callsign sign
in the log and the same problem occurred ie QRZ is causing it
Any other calls I tried no problem.

Just the response to a OD5ET lookup on the QRZ data service nails DXkeeper
(works okay on the pathfinder/qrz route)

Bob KB1JZU

--- In dxlab@... <mailto:dxlab%40yahoogroups.com> , "Bob"
<kb1jzu@...> wrote:

Anyone see this problem...

Had DXKeeper lockup and become unresponsive when entering a contact into

the capture window. Did not time out and had to reboot to fix it.

After playing around it appears that my QRZ subcription service lookup was

what was causing it and whatever it did , DXkeeper did not like it.

Changed the configuration lookup to the Pathfinder/QRZ choise and all

worked well. Tried the subscription again and it failed.

Still acting up as of 15z. Will try it again later in the day.

Bob KB1JZU

------------------------------------

Yahoo! Groups Links



No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.339 / Virus Database: 270.14.91/2542 - Release Date: 12/03/09
07:32:00

-----Original Message-----
From: dxlab@... [mailto:dxlab@...]On Behalf Of
Bob
Sent: Friday, December 04, 2009 1:14 PM
To: dxlab@...
Subject: [dxlab] Re: Problem with QRZ subscription service


Hi Dave Here is a good one

QRZ subscription works on all calls tired except one.

If I put in OD5ET and click the RST box in the DXkeeper Capture window it
goes away and doesn't come back. Application remains as "unresponsive" and
has to be stopped with task manager.

Other ODs...not problem
Name and location was filled in from my log so I changed the callsign sign
in the log and the same problem occurred ie QRZ is causing it
Any other calls I tried no problem.

Just the response to a OD5ET lookup on the QRZ data service nails DXkeeper
(works okay on the pathfinder/qrz route)

Bob KB1JZU

--- In dxlab@..., "Bob" <kb1jzu@...> wrote:

Anyone see this problem...

Had DXKeeper lockup and become unresponsive when entering a contact into

the capture window. Did not time out and had to reboot to fix it.

After playing around it appears that my QRZ subcription service lookup was

what was causing it and whatever it did , DXkeeper did not like it.

Changed the configuration lookup to the Pathfinder/QRZ choise and all

worked well. Tried the subscription again and it failed.

Still acting up as of 15z. Will try it again later in the day.

Bob KB1JZU

------------------------------------

Yahoo! Groups Links



No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.339 / Virus Database: 270.14.91/2542 - Release Date: 12/03/09
07:32:00

-----Original Message-----
From: dxlab@... [mailto:dxlab@...]On Behalf Of
DANNY DOUGLAS
Sent: Friday, December 04, 2009 11:05 AM
To: dxlab@...
Subject: [dxlab] Pathfinder not running!


Every time that I double click on a spot on SC, I get the window "Callbook
error Required version of Pathfinder not running". Have closed both PF and
SC a couple or more times, and both are showing up as connected in each
others info in brackets at the top of their respective pages. When I click
on pathfinder in the launcher window, the PF window comes up with the
Pathfinder - a member of the DXKabs suite of free amateur radio software,
last search library update 29 Aug 2009 etc. When I put my own call on the
SC search call, in the PF box, and click on QRZ ubtton, QRZ.com comes up
correctly. Running the most updated update on all Lab programs. XP Pro,
etc.
Danny Douglas
N7DC
ex WN5QMX ET2US WA5UKR ET3USA SV0WPP VS6DD N7DC/YV5 G5CTB
All 2 years or more (except Novice). Short stints at: DA/PA/SU/HZ/7X/DU
CR9/7Y/KH7/5A/GW/GM/F
Pls QSL direct, buro, or LOTW preferred,
I Do not use, but as a courtesy do upload to eQSL for those who do.
Moderator
DXandTALK

Digital_modes




------------------------------------

Yahoo! Groups Links



No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.339 / Virus Database: 270.14.91/2542 - Release Date: 12/03/09
07:32:00

-----Original Message-----
From: dxlab@... [mailto:dxlab@...]On Behalf Of
Bob
Sent: Friday, December 04, 2009 10:55 AM
To: dxlab@...
Subject: [dxlab] Problem with QRZ subscription service


Anyone see this problem...

Had DXKeeper lockup and become unresponsive when entering a contact into the
capture window. Did not time out and had to reboot to fix it.

After playing around it appears that my QRZ subcription service lookup was
what was causing it and whatever it did , DXkeeper did not like it.

Changed the configuration lookup to the Pathfinder/QRZ choise and all worked
well. Tried the subscription again and it failed.

Still acting up as of 15z. Will try it again later in the day.

Bob KB1JZU



------------------------------------

Yahoo! Groups Links



No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.339 / Virus Database: 270.14.91/2542 - Release Date: 12/03/09
07:32:00

-----Original Message-----
From: dxlab@... [mailto:dxlab@...]On Behalf Of
pcooper
Sent: Friday, December 04, 2009 8:25 AM
To: dxlab@...
Subject: [dxlab] Log on two PC's??


Hello all,

I know this has been asked before, but I can't find the email I wanted in the files.

What I would like is to be able to access my log file from another PC.
I have DXK installed (and launcher) on that PC, and for now, I have just copied the GU0SUP.MDB file to that PC. This appears to show the log OK, but I wonder if there is an automated way to achieve this?

I currently have DXK backing up to a different hard drive, but (as yet) that drive is not shared.

Also, the backup file is not named GU0SUP.MDB, but has a date appended to it.

I am sure there must be a simple way to achieve this, but I can't quite see what it is yet.

As I said, I know this has been asked before, but searching the archives brings up hundreds of emails, and I can't see the one I want.
I did try the WIKI pages, but I can't seem to navigate through that. If I try a search, I only get lost, as the "find page" seems less than useful.

Any ideas?

73 de Phil GU0SUP


------------------------------------

Yahoo! Groups Links



Checked by AVG - www.avg.com
Version: 8.5.339 / Virus Database: 270.14.91/2542 - Release Date: 12/03/09 07:32:00

-----Original Message-----
From: dxlab@... [mailto:dxlab@...]On Behalf Of
wc5m
Sent: Friday, December 04, 2009 7:53 AM
To: dxlab@...
Subject: [dxlab] Pathfinder 4.6.0. oddity


Dave,

I just noticed something odd with Pathfinder 4.6.0 probably related to the
changes QRZ recently implemented. Not a big problem but strange. If I type
in a callsign such as OY/DD1LD and click on the QRZ link Pathfinder displays
a page titled "Name Search Results" and displays a long list of callsigns
with OY in the address somewhere. If I go directly to the QRZ website and
do the same it shows a link to DD1LD.

73, Mark WC5M



------------------------------------

Yahoo! Groups Links



No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.339 / Virus Database: 270.14.91/2542 - Release Date: 12/03/09
07:32:00