开云体育

Oh brother why do you tempt me ________________________________ Sent: Tuesday, May 20, 2025 9:41 PM To: [email protected] <[email protected]> Subject: [DRAKE-RADIO] Drake C Line For Sale Hello

If nothing else, I'd be skittish about the leads sticking up with high voltage on them. Barry - N4BUQ

Hello all, I am selling one of my Drake C Lines: R-4C, T-4XC with manual AC4, MS-4 and fresh cables.? All stock, very good condition,? and regularly on the air.? For the time being, pickup only in

Sorry, I misspoke (happens a lot now that I’m nearing 80 years old). The band switch does have a 80m position. It just didn’t have a crystal slot. Now I know why. It does have a rather factory

I would not recommend replacing the 6X4 with silicon diodes. Leave the 6X4 in place. Just what does one expect to accomplish by substituting silicon diodes in place of the 6X4 rectifier tube? What

Any caps that are branded CAPAR should be unconditionally replaced. The larger caps with more recognizable names should be OK. "K8CCA via groups.io" <echapm4@...> wrote:

Congratulations!!!!!!!!!

Success! A few new caps and cleaning the grounds seems to have fixed it. Very stable! I only did the caps on the top board as I didn't have the 10 & 100uf for the bottom board. I will pick some up

My first 1-A came with diodes replacing the 6X4, At the time, it was an easy mod that was popular at a time when people wanted to replace tubes. I removed the diodes and bought a NOS 6X4 off eBay for

I think I remember that Mouser and/or Digikey can weld on tabs for any of their batteries for you. 73, Gary WB6OGD [email protected]> wrote:

Richard, Your 2B looks in good condition, good buy. A Heathkit calibrator is a good substiute for the Drake.? The only thing I would do is make some kind of bracket to mount it down.? If those wires

I found the Drake 2B Instruction Book on line, but it is a digital copy made after several generations of machine copies - it is not very clear in some places.? A couple of the pages are also out of

Hey Gary, Here are some more pictures of my cabinet.? Yes, a previous owner stuck a Heathkit 100 kc Calibrator in place of the Drake 100 kc Calibrator.? A previous owner also replaced the 6X4 tube

I have one that I bought from a guy in Germany. https://www.keenlab.de/index.php/product/kweld-complete-kit/ It has a controller that lets you specify the amount of energy in joules that you put into

In addition to the lesser concerns already expressed here, I would point out that PCB dielectric oil is quite dangerous if it burns.? The poison known as dioxin is produced.?? No one wants a

?

Nice! I wasn't aware of their site. I've gotten in touch with them regarding a CR1220 with tabs. Thanks! Barry - N4BUQ

I didn't know such a thing was being made. Nice to know. Hopefully it won't come to that and I can get a battery with tabs that will work (and I think I see some being offered). Thanks, Barry - N4BUQ

?Take a look at Batteries America (https://batteriesamerica.com/). They can probably supply what you need. Tony - W9JXN

Hey guys, Picked up a nice looking Drake RV-75 vfo for my TR-7 last weekend. Hooked it up last night and my main vfo was in the middle of the 20m band, but when I switched on the remote vfo freq drop