开云体育

Nice! I wasn't aware of their site. I've gotten in touch with them regarding a CR1220 with tabs. Thanks! Barry - N4BUQ

I didn't know such a thing was being made. Nice to know. Hopefully it won't come to that and I can get a battery with tabs that will work (and I think I see some being offered). Thanks, Barry - N4BUQ

?Take a look at Batteries America (https://batteriesamerica.com/). They can probably supply what you need. Tony - W9JXN

Hey guys, Picked up a nice looking Drake RV-75 vfo for my TR-7 last weekend. Hooked it up last night and my main vfo was in the middle of the 20m band, but when I switched on the remote vfo freq drop

Spot-weld the tabs yourself: AMAZON - Docreate Hand-Held Spot Welder, 5.5KW, $30 https://www.amazon.com/Docreate-Rechargeable-Portable-Handhelpd-Adjustable/dp/B0CB5GRJB4 73 de Andrew/N5ASE

Yes - It is a 12mm (maybe 12.5mm) battery. From what I'm seeing, the solder tabs on those are much more in line with the ones on my battery. Thanks so much for setting me straight on that! Barry -

Yeah, I need to measure it. Thanks, Barry - N4BUQ

GA, CR2032 seems to me is somewhat big, perhaps a CR1220 type fits better. Regards Guillermo - LU5WE.

Barry, If your TH-28A is anything like the Realistic/Radio Shack HTX-202 and HTX-404 HTs, I replaced the internal tabbed 3 volt Lithium cell used in these rigs with a popular CR2032 coin cell and

I didn't know that could be done as a service like that. We have a Batteries Plus but not sure if they'd do that. Thanks for the tip! Barry - N4BUQ

I've seen some of those but most of them have rather larger and wider-spaced solder tabs. I'm attaching a picture of what's in my radio. I might be able to trim the tabs as it appears that may have

Thanks a million! Sent from my T-Mobile 5G Device Get Outlook for Android<https://aka.ms/AAb9ysg> ________________________________ Sent: Tuesday, May 20, 2025 12:28:22 AM To: [email protected]

If you have a Batteries-Plus, or Batteries & Bulbs store near you, they might have one. They have the ability to spot-weld tabs on about any battery. [email protected]> wrote:

I found one for my FT-470 on Amazon. Gamers have lots of devices with these sorts of batteries. Steve Wedge, W1ES Time flies like an arrow. Fruit flies like a banana. Sent from [Proton

This is the only amateur radio group of which I'm a member so I'm looking for a bit of help. Is there an appropriate group for older Kenwood hand-helds? I have a TH-28A that needs an internal lithium

Like Mike says, no crystal needed on 80. The 2B is an 80 meter receiver with a crystal controlled converter on the front end for the other bands. 80 meters should be the first position on the left of

The Drake 2B does not have an normal 80 meter crystal (see the 2B manual page 17 for details). 73 Mike W5RKL https://www.w5rkl.com

I see the 2B receiver discussed with a 80m switch and crystal position. My 2B has neither. It also has a modified front panel that has a “overlay” under the main frequency dial and frequency

Looking at the photos that I posted some time ago at /g/DRAKE-RADIO/album?id=252836 it looks like the wires are: White - Audio Red - PTT Shield - audio ground Black - PTT return

With mine it is not a matter of overage, but of leakage. I don't think these paint cans contain oil very well. The one I have with oil has been sitting in the cake box cover drip tray for well over a