开云体育

Richard, Your 2B looks in good condition, good buy. A Heathkit calibrator is a good substiute for the Drake.? The only thing I would do is make some kind of bracket to mount it down.? If those wires

I found the Drake 2B Instruction Book on line, but it is a digital copy made after several generations of machine copies - it is not very clear in some places.? A couple of the pages are also out of

Hey Gary, Here are some more pictures of my cabinet.? Yes, a previous owner stuck a Heathkit 100 kc Calibrator in place of the Drake 100 kc Calibrator.? A previous owner also replaced the 6X4 tube

I have one that I bought from a guy in Germany. https://www.keenlab.de/index.php/product/kweld-complete-kit/ It has a controller that lets you specify the amount of energy in joules that you put into

In addition to the lesser concerns already expressed here, I would point out that PCB dielectric oil is quite dangerous if it burns.? The poison known as dioxin is produced.?? No one wants a

?

Nice! I wasn't aware of their site. I've gotten in touch with them regarding a CR1220 with tabs. Thanks! Barry - N4BUQ

I didn't know such a thing was being made. Nice to know. Hopefully it won't come to that and I can get a battery with tabs that will work (and I think I see some being offered). Thanks, Barry - N4BUQ

?Take a look at Batteries America (https://batteriesamerica.com/). They can probably supply what you need. Tony - W9JXN

Hey guys, Picked up a nice looking Drake RV-75 vfo for my TR-7 last weekend. Hooked it up last night and my main vfo was in the middle of the 20m band, but when I switched on the remote vfo freq drop

Spot-weld the tabs yourself: AMAZON - Docreate Hand-Held Spot Welder, 5.5KW, $30 https://www.amazon.com/Docreate-Rechargeable-Portable-Handhelpd-Adjustable/dp/B0CB5GRJB4 73 de Andrew/N5ASE

Yes - It is a 12mm (maybe 12.5mm) battery. From what I'm seeing, the solder tabs on those are much more in line with the ones on my battery. Thanks so much for setting me straight on that! Barry -

Yeah, I need to measure it. Thanks, Barry - N4BUQ

GA, CR2032 seems to me is somewhat big, perhaps a CR1220 type fits better. Regards Guillermo - LU5WE.

Barry, If your TH-28A is anything like the Realistic/Radio Shack HTX-202 and HTX-404 HTs, I replaced the internal tabbed 3 volt Lithium cell used in these rigs with a popular CR2032 coin cell and

I didn't know that could be done as a service like that. We have a Batteries Plus but not sure if they'd do that. Thanks for the tip! Barry - N4BUQ

I've seen some of those but most of them have rather larger and wider-spaced solder tabs. I'm attaching a picture of what's in my radio. I might be able to trim the tabs as it appears that may have

Thanks a million! Sent from my T-Mobile 5G Device Get Outlook for Android<https://aka.ms/AAb9ysg> ________________________________ Sent: Tuesday, May 20, 2025 12:28:22 AM To: [email protected]

If you have a Batteries-Plus, or Batteries & Bulbs store near you, they might have one. They have the ability to spot-weld tabs on about any battery. [email protected]> wrote:

I found one for my FT-470 on Amazon. Gamers have lots of devices with these sorts of batteries. Steve Wedge, W1ES Time flies like an arrow. Fruit flies like a banana. Sent from [Proton