开云体育

Do you know the xtal freq offhand? [email protected]> wrote:

Know the crystal freq offhand?

Here is a link to a seller on eBay that might be able to help you. I have it You need it Store | eBay Stores ( https://www.ebay.com/str/ihaveityouneeditstore )

Filling in the WARC bands I've found xtals for 30m and 12m, but I'm not having any luck tracking one down for 17m. Anybody have a pointer to where I might find one? Thanks, --lyndon

Reading the article we need something that is flexible and low in capacitance and try for a total of 60pf in the cable. Here is something that might work quite well.

If anyone is installing a Sherwood style product detector mod in an R-4B, my instructions might be helpful. I cut one trace on the Drake pcb instead of removing a bunch of components from it.? The

Thanks guys. Ver E of the instructions that I was using refers to connecting to the output pins of T11 twice. The first time it says to connect a wire from one of the vacated T11 pins to the BFO

You are correct. I use RG-62 in ~3ft lengths and it works very well. 73, Walter KR4HV

Bill, If you built the board you should know where it goes..? Reading his instructions, it sounds like his board has 2 bare wires, one is ground, the other is the T11 connection. His article has a

on the schematic you will see the connections from the T10 and T 11 to the board. This should clear it up. I am restoring my original R4B that has this in it and next time I can get to the barn I will

Bill, try this version of the installation instructions. PDF attached. Rob, NC0B Sent: Friday, February 10, 2023 8:50 AM To: [email protected] Subject: [DRAKE-RADIO] Need help installing Sherwood

I am installing his product detector board that I built and near the end of the installations it says to attach the bare wire to T11. Where does the bare wire come from on the PD board??If it is a

Thanks for the valuable feedback 73 Rob

Asked and answered years ago by the founder of this group K4OAH (SK). /g/DRAKE-RADIO/message/50555 73 -Jim NU0C "Rob PA9Z" <pa9z.groups.io@...> wrote:

Bill Losef via groups.io writes: WB6TNF is who I got my set from (via eBuy). There is a basic set (2 x RG62), and a full set (2 x RG62, 1 x RG58, and some RCA patches for VOX/Mute/PTO lamp). I bought

RG-62 is the closest. Steve Wedge, W1ES/4 Time flies like an arrow. Fruit flies like a banana. Sent from Proton Mail for iOS

?39" of RG-62 works well and is used by many of us. And yes, there are a couple of eBay sellers who offer two pre-made cables of RG-62, ready to go, if you don't want to get a short length and roll

There is a Ham selling the complete cable set up for the twins on ebay. I bought the set and the radio works much better. Hears anything that the icom 7300 does and sometimes better. He has quality

RobIIRC the critical cable is the injection cable and that has to have a capacitance of 38pf.?? For the injection cable a three foot length of RG-62 works. I believe RG-58 is anywhere from 25-30pf

BELDEN 8421 is the specified cable for that.? No, I don't have any more on hand. Paul K0UYA