开云体育

I'll add that a larger tip with more thermal mass will get the job done quicker. 73 -Jim NU0C "Jeffrey Angus" <jdangus@...> wrote:

Turn up the heat!

You're doing it wrong. A HOT tip. Get on and off quickly. Use RMA rosin flux in addition to the core flux. And, personally, use 63/37 solder. 0.032" -- "I am a river to my people." Jeff-1.0 WA6FWI

In line audio filters are a wonderful tool. I have two different DPS boxen that I regularly use that are frankly amazing. But you have to be aware of their limitations. They won't help with strong

Try rfconnection.com.? Bob - W3DK.Sent from my Verizon, Samsung Galaxy smartphone

Group I'm finding out tonight I haven't received any posts on the reflector since April 9, when I first posted my question about DIN connectors but I have now read those replies in "direct" mode after

Does anyone know of a good brand of these pesky connectors?? By good I mean NOT a plastic body that melts at the mere sight of a soldering iron?? I have soldered more than a few connections in my

I've used Conny's DAFC on several TR7s since Cumbria closed. The DAFC works very well and comes assembled with the hardware to install it in the TR7. [] 73, Joe Pyles KC9LAD -- This email has been

OK, but still using it as a test! Joe – W7RKN From: [email protected] [mailto:[email protected]] On Behalf Of Ryan Scott via groups.io Subject: Re: [DRAKE-RADIO] File /Stan_Inventory.pdf

You may try Conny, DL1SDQ. He is THE German TR7 repair guy and - amongst other services - he has a stabilizer. http://www.conny-dl1sdq.de/3061/3115/index.html 73 de Dieter DL5RDO Am 12.04.2021 um

Sounds like the socket needs cleaning. Some DeOxit and a GUM Proxabrush dental cleaning brush will do it. Mike, W1NR

On page 13 of the following document, located on Ron, WB4HFN's web site list the 3 current stabilizers that are being sold. All work as well as another, although I've never personally had the Elcon

Well, at risk of seeming an amalgamation of a classic snake oil salesman and revivalist 'tent meeting' speaker, I can personally attest for Dave Cripe's HiPerMite audio filter. It first appeared in 73

N4KZO de K8NN Thanks Michael.? I had been thinking of that but in the other direction.? I managed to get the full alignment procedure done while all three were oscillating. Would be good to go

NM0S has designed a narrow 200 CW filter that has *no* ringing. The QRP Labs QCX QRP rigs use that design and I can attest to the effectiveness of that CW filter. One of my many projects is to build

Paul, are you getting this? Joe - W7RKN

yes the xtal/vfo switch is clean, in fact at one point I had it jumped out to make sure. I was reading LO and PTO at V8 socket pins with a scope. I have hit the tube socket with contact cleaner. Yes

After 15 years of producing kits for the Amateur Radio enthusiast, Ron and Gill Taylor of Cumbria Designs (UK) ceased their business on 17th December 2018. 83A0B7A8-8AD1-4957-BD08-10F2EED5C9FD.jpeg (

John, I am thankful that the oscillator is working now for all bands. ?You are welcome for any helpful suggestions. ?You have observed that sudden oscillation occurs when all conditions for

James, Check QTH.com. There is a ham who advertises his version of a VFO stabilizer. I never bought one. I cannot say anything good or bad about it. Wayne/WC1C ________________________________ Sent: