开云体育

Jim the 24 VDC is okay and I changed C2108 last spring as it failed. 73, Jim VE1RB [email protected]> wrote:

Yes Gary exactly what it is. 73, Jim VE1RB [email protected]> wrote:

I got the last LSB filter direct from Bill Frost when Drake had their clearance sale of all the Ham parts. Just because I could. I probably got a CW filter at the same time if it was available but I

My TR-6 only has the stock USB and an AM filter. I’ve never thought I’ve needed a CW or LSB filter but they are rare. Steve Wedge, W1ES Time flies like an arrow. Fruit flies like a banana. Sent

Does the display read 51 950.0 on all the high bands (above 15 MHz)? Gary W0DVN

The Sunday Drake Net is on 7238 +/- QRM, from 4-5 PM Eastern time. ?You can listen to it via some of the remote receiver sites in the midwest and east coast; I do not have a website listing. Merry

I need the freqs and times for Drake phone (or CW) nets. Tnx & 73 Jay W6CJ

How about "I'm not sure"? :D It's been so long that I don't remember. "Lyndon VE7TFX via groups.io" <lyndon@...> wrote: -- 73 -Jim NU0C

Also check the +24V from the PS board. C2108 can cause strange PLL issues as it fails, and it WILL fail eventually. This is a known failure point in the TR7. "Jim Harris via groups.io"

Bob & Group, I think I've got it solved. Using an IFR1200S (GPS ref) service monitor, I tuned the R4C and T4XC oscillators to 5645, as well as the AM oscillator. My R4C (recently back from service)

I built a homemade AUX7. I populated it with 30M and IIRC 17M and 24M. - Jerry, KF6VB

Lyndon, I have a TR-6 with all the filters.? What do you need? 73, Bill, K3PGB

Hi Gary, No I have not seen the frequency change but I have never left that way more than a few minutes. I already decided to clean the back switch and the molex pins etc. I will do that as soon as I

Another Christmas Day survey :-) 1) Does anyone here own a TR-6 with a CW filter installed? (I do not need to hear from all the people who DON'T have a CW filter.) 2) If you don't have a TR-6 CW

Does the radio wander up to this frequency and then sort of slowly stop wandering? The local oscillator in this radio is simply the output of a VCO in the synthesizer, one that uses the analog PTO as

Merry Christmas! A quetion to ponder as you gaze in wonder at the TR-6 Santa left for you under the tree ... If you had your choice of any eight band modules to populate your AUX-7 with, what would

I now have the receiver and transmitter working good. The problem now is that the 15 and 10 meter bands do not work. The display shows the frequency in the photo. I am trying to find time to read how

You might want to give this a read. /g/DRAKE-RADIO/files/Drake%20L7%2010%20Meter%20High%20Input%20SWR%20complete.pdf "Roger KW4EMF via groups.io" <rogerlhill@...>

Do you remember how you removed the stop in the band selector??Sent from my T-Mobile 5G Device

Yes it had the band pass filter. I removed it. Now to "unlock" the band selector and add a capacitor.?ThanksRogerSent from my T-Mobile 5G Device