开云体育

To all…again… Please, cut and paste, or reply, to the message or part of a message, to which you are replying. Many people delete messages as they read them, as they read the posts via their

I'd like to see the original post too, please Thanks Denis, N5KX [email protected]> wrote:

Wish I could have read the message you are replying too, not a health issue?? Tim WB8UHZ

I've finally gotten up the time/courage to get back into my TR7; have fixed several bad counters on the DR-7 board, and figured out that clearances for the replacement German made display board are so

Well said..this plandemic is proof it is not a health issue it is an economic issue..

Rick - I wanted to chime in - I've had TC2/TC6/SC2/SC6 set up in the past with R4/T4X series (still have the equipment, just no space in operating position to set it all up currently), and one minor

I have a Clearspeech Base that is a magic box and I also run a JPS NIR-12. Have used a Timewave DSP-9 with good results but the JPS and Clearspeech rock. 73 -Jim NU0C "Mike Davidsohn G3ZCC"

Hi Steve I did the same, went over the alignment again because of all the pulling about. It hadn't shifted a jot. Good luck with yours and keep us posted how you get on. Kind Regards Mike G3ZCC

Hi Peter Thank you for your kind words and yes hopefully my exploits will help someone else. I have been using the TR7 side by side with my Yaesu FTDX 3000 during the contest this weekend the Drake

Hi Roger I have the transmitter of the pair, an early "duck egg" 2000, 2000 G Line, 2000A,B, E. and a KW Atlanta Plus a KW 600 and KW 1000 Linear. All working, if you need any schematics or help with

Thanks for the reply.? Once I finish getting here working I will contact you regarding some crysta;s Greg

Thanks Steve, That's good to know. 73, Doug

That's odd, I had no clearance problems at all with the German board. 73 -Jim NU0C "Gary Woods" <garygarlic@...> wrote:

The fish paper goes across the top of the PTO lamp metal and prevents the DR7 display solder pads from touching that grounded surface. Gary W0DVN

I've finally gotten up the time/courage to get back into my TR7; have fixed several bad counters on the DR-7 board, and figured out that clearances for the replacement German made display board are so

Jim, Thank you, I had read that part in the manual after I posted my question.? I'll see what I can find out.? Been a ham since 1986, but just now starting to learn how things work so it may take me

No but after 60 yrs of troubleshooting and restoration I have figured out 45 year old caps will do one thing for sure. Be leaking or soon will be.except for oil filled .73.Tony wa4jqs Sent via the

What new meter of any quality is cheap these days? I managed to find new meters on the Bay of the same style for my PS-2000 a while back and just made new scales for them using the "METER" software.?

Your TR-4CW is holding its value.The American Dollar on the other hand, has not.Jim - WB6TNF? On Sun, Mar 28, 2021 at 12:00 PM, gary schnakenberg<wb2jax@...> wrote: So my TR-4CW is holding its?

So my TR-4CW is holding its? value.