Re: Centos7 ... end of life
Out of 319 active G3 gateways only 21 have converted to the new Alma code and
?2.2q? ? ?Linux version 5.14.0-427.20.1.el9_4.x86_64 (64)
N7TWW
|
Re: Centos7 ... end of life
Agree with the Lamma...?
Wouldn't it be nice if we had a software environment simulator based on Alma and including each of the icom packages, gateway, controller, and repeaters, to be interchanged for comparability & config .... Then simulate interactive features between systems such as linking..
Just thinking ... aa7oo Norm
--
aa7oo
|
Re: Centos7 ... end of life
You need to get a new gateway release from ICOM then get a copy of the new ALMA code/linux and follow the directions.? I’m not planning on changing any of my system/s until the fall , after others figure out all the new bugs.. At this point in the yum releases there will not be any new features you should need and if there was an exploit somebody would have found it already.? Keep your system locked down except for ports needed for the mission and don’t load a bunch of un-needed crap on your server. ? CHrisR ?
toggle quoted message
Show quoted text
From: [email protected] <[email protected]> On Behalf Of kd7kdo via groups.io
Sent: Friday, July 5, 2024 1:11 PM
To: [email protected]; Wally_lamma <n7tww@...>; Norm Johnson AA7OO <aa7oo.az@...>
Subject: [D-Star-Arizona] Centos7 ... end of life? ? I see that Centos7 is at end of life ... as of end of June. My 'Yum -update' is no longer working. ? Is this a problem for my server??
|
Dstar group, ? I see that Centos7 is at end of life ... as of end of June. My 'Yum -update' is no longer working. ? Is this a problem for my server??
? What should I do?
Best regards,
Paul Bennett
kd7kdo@... 480 435-8660
|
Re: Mount Lemmon Repeater Callsign Change - Aug 19, 2023
MAtt, THANK YOU for the update.? I do now see the REF009 users showing up on the DSTARUSERS.ORG last heard list.
I am wondering what brand of MW xcvr you are using for the interconnect?
Regards
ChrisR
|
Re: Mount Lemmon Repeater Callsign Change - Aug 19, 2023
Thank you Matt and all involved.
Ron
n8hbf@...
toggle quoted message
Show quoted text
-----Original Message----- From: [email protected] < [email protected]> On Behalf Of Matthew Grossman, AC7IL via groups.io Sent: Thursday, June 6, 2024 4:11 PM To: [email protected]Subject: Re: [D-Star-Arizona] Mount Lemmon Repeater Callsign Change - Aug 19, 2023 ref009 has been updated and rebooted. K7TUS is running in standalone until I replace the 11GHz uplink to the Internet. On 5/12/2024 3:20 PM, wally_lamma wrote: Matt, any chance you will be getting the ref009 server reloaded?
None of the users connected to ref009 ever show up on the
DSTARUSERS.ORG last heard page.
Also I haven't been able to see the last heard list for any of the
K7TUS repeaters for some time I suspect that one or more of the server
processes are stopped or possibly IP blocked to the outside world.
THX
ChrisR
N7TWW
-- ** Matthew J. Grossman, PP-ASEL matthew@... a.k.a. The_Nerd / AC7IL **
|
Re: Mount Lemmon Repeater Callsign Change - Aug 19, 2023
ref009 has been updated and rebooted. K7TUS is running in standalone until I replace the 11GHz uplink to the Internet.
toggle quoted message
Show quoted text
On 5/12/2024 3:20 PM, wally_lamma wrote: Matt, any chance you will be getting the ref009 server reloaded?
None of the users connected to ref009 ever show up on the DSTARUSERS.ORG last heard page.
Also I haven't been able to see the last heard list for any of the K7TUS repeaters for some time I suspect that one or more of the server processes are stopped or possibly IP blocked to the outside world.
THX
ChrisR
N7TWW
--
**
Matthew J. Grossman, PP-ASEL matthew@...
a.k.a. The_Nerd / AC7IL
**
|
5/29/2024
These 3 sites are no longer available via this method.? The two RST sites no omg operate with that call.? One is gone the other is K7TUS but the server needs reloading to get all of the ID and last heard stuff working correctly.? The K7NAZ system is no longer a pure ICOM system so it doesn't provide the same data as a true ICOM gateway system would.
k7rst.dstargateway.org
kr7st.dstargateway.org
k7naz.dstargateway.org
Regards
N7TWW
|
Re: Mount Lemmon Repeater Callsign Change - Aug 19, 2023
Matt, any chance you will be getting the ref009 server reloaded??
None of the users connected to ref009 ever show up on the DSTARUSERS.ORG last heard page.
Also I haven't been able to see the last heard list for any of the K7TUS repeaters for some time I suspect that one or more of the server processes are stopped or possibly IP blocked to the outside world.
THX
ChrisR
N7TWW
|
Mount Lemmon Repeater Callsign Change - Aug 19, 2023
The 147.410, 445.900, 1284.250 and 1298.250 repeaters on Mount Lemmon will change their callsigns from K7RST to K7TUS on August 19. Please adjust your programming accordingly.
Thank you,
Matthew Grossman, Ac7IL
**
Matthew J. Grossman, PP-ASEL matthew@...
a.k.a. The_Nerd / AC7IL
**
|
ATTENTION Registering for D-Star
Going forward, it has been decided that new registrations for KE7JFH D-Star (ie, Usery and Pinal) should go through REGIST.
There are several reasons for this, one of which is the unreliability of notifications of a new registration pending with G3 Gateway Software.
To register with REGIST go to -? ?
Here is a tutorial-??
?
n7mk
?
?
?
|
Yes!!!? Exactly!!!
David, AC7DS
On 1/12/21 4:50 PM, Mark Krotz wrote:
toggle quoted message
Show quoted text
Don't just "key the radio".? Say something.
n7mk
On 1/12/2021 4:38 PM, David Holman
via groups.io wrote:
This is good information.? However, instead
of "listening" for activity, key the radio and create some
activity.? I try to do that when I have time.?
Thanks
David, AC7DS
On 1/12/21 1:21 PM, wally_lamma
wrote:
So I was listening to some activity on the KE7JFH system and
it dawned on me that we have a handful of new users who may
not know where to find info on what the repeater systems are
connected to.
The following web locations will provide you the current DPLUS
DASHBOARD for the repeater system:
Depending on the browser you may get a notification that site
is unsecure, if you get this message accept the risk and the
page should be displayed.? If you are using firefox you may
have to go to an advanced tab and accept the risk.? MS EDGE
has a some message that asks about selecting the link shown
and continuing to site in question.
ke7jfh.dstargateway.org
n7ci.dstargateway.org
w7mot.dstargateway.org
k7rst.dstargateway.org
kr7st.dstargateway.org
k7naz.dstargateway.org
You will not be able to pull this info up for KG7HBZ as there
gateway is not accessible to the outside world.
Another way to get info related tot he repeater stack is to go
to this web location for KE7JFH.? IF you change the call
letters to the repeater you want to view you can see the same
info for another system.? ALSO the call MUST be in CAPS
See the two examples below:
|
I did fail to put in the HTTPS:// in front of the info shown Should look like this https://ke7jfh.dstargateway.org
cr ?
toggle quoted message
Show quoted text
From: [email protected] < [email protected]> On Behalf Of David Holman via groups.io Sent: Tuesday, January 12, 2021 4:38 PM To: [email protected]Subject: Re: [D-Star-Arizona] GENERAL INFO ? This is good information.? However, instead of "listening" for activity, key the radio and create some activity.? I try to do that when I have time.? Thanks David, AC7DS ? ? On 1/12/21 1:21 PM, wally_lamma wrote: So I was listening to some activity on the KE7JFH system and it dawned on me that we have a handful of new users who may not know where to find info on what the repeater systems are connected to.
The following web locations will provide you the current DPLUS DASHBOARD for the repeater system:
Depending on the browser you may get a notification that site is unsecure, if you get this message accept the risk and the page should be displayed.? If you are using firefox you may have to go to an advanced tab and accept the risk.? MS EDGE has a some message that asks about selecting the link shown and continuing to site in question.
ke7jfh.dstargateway.org
n7ci.dstargateway.org
w7mot.dstargateway.org
k7rst.dstargateway.org
kr7st.dstargateway.org
k7naz.dstargateway.org
You will not be able to pull this info up for KG7HBZ as there gateway is not accessible to the outside world.
Another way to get info related tot he repeater stack is to go to this web location for KE7JFH.? IF you change the call letters to the repeater you want to view you can see the same info for another system.? ALSO the call MUST be in CAPS
See the two examples below:
|
Don't just "key the radio".? Say something.
n7mk
On 1/12/2021 4:38 PM, David Holman via
groups.io wrote:
toggle quoted message
Show quoted text
This is good information.? However, instead of
"listening" for activity, key the radio and create some
activity.? I try to do that when I have time.?
Thanks
David, AC7DS
On 1/12/21 1:21 PM, wally_lamma
wrote:
So I was listening to some activity on the KE7JFH system and it
dawned on me that we have a handful of new users who may not
know where to find info on what the repeater systems are
connected to.
The following web locations will provide you the current DPLUS
DASHBOARD for the repeater system:
Depending on the browser you may get a notification that site is
unsecure, if you get this message accept the risk and the page
should be displayed.? If you are using firefox you may have to
go to an advanced tab and accept the risk.? MS EDGE has a some
message that asks about selecting the link shown and continuing
to site in question.
ke7jfh.dstargateway.org
n7ci.dstargateway.org
w7mot.dstargateway.org
k7rst.dstargateway.org
kr7st.dstargateway.org
k7naz.dstargateway.org
You will not be able to pull this info up for KG7HBZ as there
gateway is not accessible to the outside world.
Another way to get info related tot he repeater stack is to go
to this web location for KE7JFH.? IF you change the call letters
to the repeater you want to view you can see the same info for
another system.? ALSO the call MUST be in CAPS
See the two examples below:
|
This is good information.? However, instead of
"listening" for activity, key the radio and create some
activity.? I try to do that when I have time.?
Thanks
David, AC7DS
On 1/12/21 1:21 PM, wally_lamma wrote:
toggle quoted message
Show quoted text
So I was listening to some activity on the KE7JFH system and it
dawned on me that we have a handful of new users who may not know
where to find info on what the repeater systems are connected to.
The following web locations will provide you the current DPLUS
DASHBOARD for the repeater system:
Depending on the browser you may get a notification that site is
unsecure, if you get this message accept the risk and the page
should be displayed.? If you are using firefox you may have to go
to an advanced tab and accept the risk.? MS EDGE has a some
message that asks about selecting the link shown and continuing to
site in question.
ke7jfh.dstargateway.org
n7ci.dstargateway.org
w7mot.dstargateway.org
k7rst.dstargateway.org
kr7st.dstargateway.org
k7naz.dstargateway.org
You will not be able to pull this info up for KG7HBZ as there
gateway is not accessible to the outside world.
Another way to get info related tot he repeater stack is to go to
this web location for KE7JFH.? IF you change the call letters to
the repeater you want to view you can see the same info for
another system.? ALSO the call MUST be in CAPS
See the two examples below:
|
So I was listening to some activity on the KE7JFH system and it dawned on me that we have a handful of new users who may not know where to find info on what the repeater systems are connected to.
The following web locations will provide you the current DPLUS DASHBOARD for the repeater system:
Depending on the browser you may get a notification that site is unsecure, if you get this message accept the risk and the page should be displayed.? If you are using firefox you may have to go to an advanced tab and accept the risk.? MS EDGE has a some message that asks about selecting the link shown and continuing to site in question.
These are https://
ke7jfh.dstargateway.org
n7ci.dstargateway.org
w7mot.dstargateway.org
k7rst.dstargateway.org
kr7st.dstargateway.org
k7naz.dstargateway.org
You will not be able to pull this info up for KG7HBZ as there gateway is not accessible to the outside world.
Another way to get info related to the repeater stack is to go to this web location for KE7JFH.? IF you change the call letters to the repeater you want to view you can see the same info for another system.? ALSO the call MUST be in CAPS
See the two examples below:
www.dstarusers.org/viewrepeater.php?system=W7MOT
|
Bob,
Before trying to relink, The repeater. Talk to some folks on it. You want to talk to someone through the reflector to make sure everything is set up correctly. Then you can try relinking. But get on and use the system. Once you are sure everything is set up, I can help you the how to’s.?
Thanks
David, AC7DS?
toggle quoted message
Show quoted text
On Jun 30, 2020, at 10:28, Bob Cone <ka6bob@...> wrote:
? Outstanding! I will plan to attend the net in the coming weeks. At this time I am registered but not to a specific repeater. That process is quite tedious as many of the registration sites listed are"down". I pass the "echo" test on the local Mesa and Globe gateways but I have yet to talk to anyone. I am hesitant to link to another site or even a reflector because I am not sure what the protocols are. Thank you for your reply! '73 Bob, KA6BOB Bob,
DSTAR Is an awesome mode. It is very powerful as an advanced local communication tool. It has a lot of functionality for EMCOMM in the local area. If it can connect to the internet, you can communicate with your mother easily. If an earthquake happens and they lose the internet it will be more difficult.? She could use her radio to reach someone who could get a message to you. HF would be best. DSTAR was developed for advanced local communication.?
That said, that is not what everyone uses it for.?
I hold a net every Saturday night on REF009C I would encourage you and your mother to join us.? I won’t be having it this Saturday because of the 4th.?
Tnx
David, AC7DS? ?I was gifted a ID-4100A for Fathers Day; I honestly have never pursued digital modes but this looks interesting. My mother is in S California in the middle of earthquake country and I would like an alternate way to communicate with her on her Icom D-Star HT.
It appears I have completed the registration for myself but still need to tie myself to a home repeater. All the web sites I go to to complete that part come us as "down" with a message stating a secure connection cannot be made.
I live in Gilbert AZ and was looking at the Mesa (Usrey) site. Any reading suggestions and assistance with the repeater registration would be much appreciated!
'73
de Bob, KA6BOB
-- '73 de KA6BOB, Bob
|
Outstanding! I will plan to attend the net in the coming weeks. At this time I am registered but not to a specific repeater. That process is quite tedious as many of the registration sites listed are"down". I pass the "echo" test on the local Mesa and Globe gateways but I have yet to talk to anyone. I am hesitant to link to another site or even a reflector because I am not sure what the protocols are. Thank you for your reply! '73 Bob, KA6BOB
Bob,
DSTAR Is an awesome mode. It is very powerful as an advanced local communication tool. It has a lot of functionality for EMCOMM in the local area. If it can connect to the internet, you can communicate with your mother easily. If an earthquake happens and they lose the internet it will be more difficult.? She could use her radio to reach someone who could get a message to you. HF would be best. DSTAR was developed for advanced local communication.?
That said, that is not what everyone uses it for.?
I hold a net every Saturday night on REF009C I would encourage you and your mother to join us.? I won’t be having it this Saturday because of the 4th.?
Tnx
David, AC7DS? ?I was gifted a ID-4100A for Fathers Day; I honestly have never pursued digital modes but this looks interesting. My mother is in S California in the middle of earthquake country and I would like an alternate way to communicate with her on her Icom D-Star HT.
It appears I have completed the registration for myself but still need to tie myself to a home repeater. All the web sites I go to to complete that part come us as "down" with a message stating a secure connection cannot be made.
I live in Gilbert AZ and was looking at the Mesa (Usrey) site. Any reading suggestions and assistance with the repeater registration would be much appreciated!
'73
de Bob, KA6BOB
--
'73
de KA6BOB, Bob
|
All,
Every Saturday at 19:00 (AZ Time) I hold the AZ DSTAR Net. This weekend I will be canceling the Net for the 4th.?
Thanks
toggle quoted message
Show quoted text
On Jun 29, 2020, at 20:16, David Holman <aikidave20@...> wrote:
? Bob,
DSTAR Is an awesome mode. It is very powerful as an advanced local communication tool. It has a lot of functionality for EMCOMM in the local area. If it can connect to the internet, you can communicate with your mother easily. If an earthquake happens and they lose the internet it will be more difficult. ?She could use her radio to reach someone who could get a message to you. HF would be best. DSTAR was developed for advanced local communication.?
That said, that is not what everyone uses it for.?
I hold a net every Saturday night on REF009C I would encourage you and your mother to join us. ?I won’t be having it this Saturday because of the 4th.?
Tnx
David, AC7DS? On Jun 29, 2020, at 14:04, ka6bob@... wrote:
?I was gifted a ID-4100A for Fathers Day; I honestly have never pursued digital modes but this looks interesting. My mother is in S California in the middle of earthquake country and I would like an alternate way to communicate with her on her Icom D-Star HT.
It appears I have completed the registration for myself but still need to tie myself to a home repeater. All the web sites I go to to complete that part come us as "down" with a message stating a secure connection cannot be made.
I live in Gilbert AZ and was looking at the Mesa (Usrey) site. Any reading suggestions and assistance with the repeater registration would be much appreciated!
'73
de Bob, KA6BOB
|
Bob,
DSTAR Is an awesome mode. It is very powerful as an advanced local communication tool. It has a lot of functionality for EMCOMM in the local area. If it can connect to the internet, you can communicate with your mother easily. If an earthquake happens and they lose the internet it will be more difficult. ?She could use her radio to reach someone who could get a message to you. HF would be best. DSTAR was developed for advanced local communication.?
That said, that is not what everyone uses it for.?
I hold a net every Saturday night on REF009C I would encourage you and your mother to join us. ?I won’t be having it this Saturday because of the 4th.?
Tnx
toggle quoted message
Show quoted text
On Jun 29, 2020, at 14:04, ka6bob@... wrote:
?I was gifted a ID-4100A for Fathers Day; I honestly have never pursued digital modes but this looks interesting. My mother is in S California in the middle of earthquake country and I would like an alternate way to communicate with her on her Icom D-Star HT.
It appears I have completed the registration for myself but still need to tie myself to a home repeater. All the web sites I go to to complete that part come us as "down" with a message stating a secure connection cannot be made.
I live in Gilbert AZ and was looking at the Mesa (Usrey) site. Any reading suggestions and assistance with the repeater registration would be much appreciated!
'73
de Bob, KA6BOB
|
wally_lamma N7TWW
Bob Cone