开云体育

ctrl + shift + ? for shortcuts
© 2025 开云体育
  1. D-STAR23cm
  2. Topics

Icom ID-1 Software?

 

Hello,

I just bought a used Icom ID-1 1200 mhz radio. It works great, but I would love the software to program it. Icom no longer has the software on their site. Can someone please share the software and drivers with me? If needed I have an older computer. I think it runs windows 98. Also have Windows 10.

thx,
josh
KB6VTU
San Carlos, CA
You can find my e-mail on QRZ.com
 

I have the software and license key after I come back home you can have it, I think I have also a secret page link, I look in the morning, it is 1 am now here?

On Sun, Mar 29, 2020 at 00:11 Josh Bloom via Groups.Io <josh.bloom=[email protected]> wrote:
Hello,

I just bought a used Icom ID-1 1200 mhz radio. It works great, but I would love the software to program it. Icom no longer has the software on their site. Can someone please share the software and drivers with me? If needed I have an older computer. I think it runs windows 98. Also have Windows 10.

thx,
josh
KB6VTU
San Carlos, CA
You can find my e-mail on QRZ.com

--
Peter Scherp
 

Great, thanks Peter.
 

Hi Peter! I also have an ID-1!!! I didnt't found a shop that sell the software. Thanks 73s from LU8EUT
 

Hi Josh! Can you share? Have an ID-1
 

开云体育

All,

?

Have you looked at the ICOM Japan ()?? I was able to update the driver from the site.

?

W6ONT

?

From: <[email protected]> on behalf of Roberto Velasco <rovelasco@...>
Reply-To: <[email protected]>
Date: Monday, February 1, 2021 at 5:36 AM
To: <[email protected]>
Subject: Re: [D-STAR23cm] Icom ID-1 Software?

?

Hi Josh! Can you share? Have an ID-1

erwestgard
 

开云体育

The new updated ID-1 drivers are up there -yes.? Are there reports of any new or redesigned repeaters here?? We still use DD mode but now only as a backup to our Medical Command mesh.? DD mode is fast enough for our basic web database apps but not for any video which is popular with served agencies. ?The line of sight range is still lovely- miles and miles.?

?

Erik NY9D
 

Erik -?

Attached is the recent announcement from Icom regarding the new G3 D-STAR repeaters.?


73, Mark, WB9QZB

Mark Thompson
Email: wb9qzb_groups@...


On Monday, February 1, 2021, 08:49:17 AM CST, erwestgard <ewestgard@...> wrote:


The new updated ID-1 drivers are up there -yes.? Are there reports of any new or redesigned repeaters here?? We still use DD mode but now only as a backup to our Medical Command mesh.? DD mode is fast enough for our basic web database apps but not for any video which is popular with served agencies. ?The line of sight range is still lovely- miles and miles.?

?

Erik NY9D

G3_D_STAR_Announcement_Bulletin_OCT_2020.pdf
G3_D_STAR_Announcement_Bulletin_OCT_2020.pdf

 

for usb driver
,software, i hope it help you, AI4UE Peter in Burlington, NC


On Mon, Feb 1, 2021 at 8:36 AM Roberto Velasco <rovelasco@...> wrote:
Hi Peter! I also have an ID-1!!! I didnt't found a shop that sell the software. Thanks 73s from LU8EUT



--
Peter Scherp

CD-250605-001.zip
CD-250605-001.zip

 

Hello. I'm looking for ID-1 Adjustment Software CD so if you have come across that CD then please let me know.
I have the ID-1 Control Software ISO and attached it here for you.

ID-1_Control_Software_CD-250603-009.iso
ID-1_Control_Software_CD-250603-009.iso

 

Hi John

I'm looking for ID-1 Adjustment Software as well.
Can you help me ?

Thank You

73 Tom
 

Hi Tom

Sorry for the late reply. I've been on holiday and tomorrow I go to
work in Western Australia for 30 days of work.

I have asked Icom NZ, Australia, USA and HRO.
I also tried RT Systems and no luck with any of those.

Icom NZ asked Japan but they say they don't have the software any more.
I find this somewhat surprising as there is adjustment software for many radios
Icom manufactured including the IC-400 pro.?I have a copy of that software.

While I am away I will write to Icom UK and Germany to see if they can help.
Someone will have that software and a matter of tracking it down.
Lots out there get confused between "Adjustment software" and
"Control Software" which we had supplied with the radio.

I'll keep going and hope we get some help by next month.
Icom Japan seem to only be contactable via the Icom dealer in the country
that sold the ID1 radio. Maybe try from your local Icom dealer.

73, John ZL2TWS
Wellington New Zealand.


------ Original Message ------
From "Tom Babut via groups.io" <sp5xmu@...>
Date 20/05/2024 8:24:57 PM
Subject Re: [D-STAR23cm] Icom ID-1 Software?

Hi John

I'm looking for ID-1 Adjustment Software as well.
Can you help me ?

Thank You

73 Tom

 

The following message below was received from the New Zealand and Australian Icom service departments.
I have also asked Icom New Zealand to contact the technical division at Icom Japan who are providing
us with ID-RP2C firmware updating. We are updating from V1.0 and V1.2 in the two RP2C controllers
we have, to V1.6. Only Icom service agents can do this due to restrictions placed on Icom by JARL.
Icom Japan (as above, RP2C firmware department) say they no longer have the ID-1 Adjustment Software
and not even a CD version. So we hope someone out there might have it on a shelf.
Icom Europe perhaps? Icom UK lost all their files in a server crash some years ago so I'm thinking
almost all possibilities have been exhausted to find this rare Adjustment Software.
Did Icom ever create it? Section 5 of the ID-1 Service manual clearly indicates that the software
was available in 2009 or later.

Here is the feedback message from Icom New Zealand and Australia:?

We do not have a copy of the adjustment software and when we enquired about it a little while back with HQ
we were informed that they no longer had a copy on file.
I had previously searched around the globe for it but to no avail.


Lets keep looking. 73 and good DV. John ZL2TWS

icom_id-1_sm-1.pdf
icom_id-1_sm-1.pdf

 

When I got my ID-1, it came with a CD.? I'll take a look at it and see if it is what you are looking for. Might take a while since I have it in storage.?

Will
KA3UQQ
 

Hi Will.

Thanks for your reply. Yes you are correct but the CD that is packed with the radio is the Control Software.
Adjustment software is another CD that could be purchased from Icom or only available at their service centers.
I have Adjustment Software for the IC-400Pro radio as an example and I see that other Icom radios can also
use Adjustment Software purchased separately.

73, John
 

vince


On Tue, Jul 9, 2024 at 4:11?PM John M Wysocki via <zl2tws=[email protected]> wrote:
The following message below was received from the New Zealand and Australian Icom service departments.
I have also asked Icom New Zealand to contact the technical division at Icom Japan who are providing
us with ID-RP2C firmware updating. We are updating from V1.0 and V1.2 in the two RP2C controllers
we have, to V1.6. Only Icom service agents can do this due to restrictions placed on Icom by JARL.
Icom Japan (as above, RP2C firmware department) say they no longer have the ID-1 Adjustment Software
and not even a CD version. So we hope someone out there might have it on a shelf.
Icom Europe perhaps? Icom UK lost all their files in a server crash some years ago so I'm thinking
almost all possibilities have been exhausted to find this rare Adjustment Software.
Did Icom ever create it? Section 5 of the ID-1 Service manual clearly indicates that the software
was available in 2009 or later.

Here is the feedback message from Icom New Zealand and Australia:?

We do not have a copy of the adjustment software and when we enquired about it a little while back with HQ
we were informed that they no longer had a copy on file.
I had previously searched around the globe for it but to no avail.


Lets keep looking. 73 and good DV. John ZL2TWS

1 - 16 of 16