开云体育

Any D-Star (or SSB, or FM) activity in? Los Angeles Grid DM04VC? I can hit 1 or 2 FM repeaters, worked a SOTA portable, can't hit any D-Star repeaters from my loc. 73, W6CJ

Tnx- Live in LA, grid DM04VC. Using a GP-98 tri-band antenna, a little higher than roof level. I can hit FM repeaters on Mt WIlson, sometimes one in Hollywood Hills, 1287.65 on Santiago. A lot of

Where do you live??? LA and San Diego have many!!

Greetings. Just got a new IC-9700 and am new to this list. Currently looking for DSTAR DV repeaters in Southern CA but have found none so far. 73 W6CJ

Hello, I have a ID-RP2C/RSRP3 G3 and ID-RP2D 1.2Ghz DD for sale. Please contact me via email if interested. 73, Robert AE5YG

N0NAS reminded me there is a good, solid commercial antenna for 1.2. We have one on a government site. Ten years so far.

http://www.jagelectromagnetics.com/JAG%20EM%20Spec%20Sheets/JAG%20Catalog%20JAG_1270_2x4_OMD%20Page1_rev0.pdf

We use Comet GP95s - lots of them. They are a decently sturdy antenna - but have a fatal, 100% flaw. The 6MM bolt on the base always loosens and the antenna always starts to wobble and spin, causing

My choice for a repeater antenna would be a Hustler Spirit - They come in 6,9, 10 & 12 Db gain varities

Tom -? It was good to see you at the Jefferson hamfest.? The RF folder in the Files area of this group has several 1.2 GHz antennas described.? I understand the Hustler Spirit commercial grade 1.2

We're using a GP-21 on top of the 250 ft. tower at the repeater site. At home, I use a Comet CYA-1216E. Both have been in service for nearly ten years and are doing very well. 73, Brad

Wondering what antenna you are using for 1.2 GHz for a Base or a Repeater? I've set up a Comet GP-21 for event use at times.? However, fiberglass antennas don't seem to last as long as some

I see, that makes sense. The unit did ship from Japan! Is there any sort of modification I can do to open it up for the US band? ?I wonder if Icom could help… Thanks!

Lower limit of the Japanese band is 1260 JH3XCU/1 on Twitter: "Amateur Radio in Japan Japanese Band Plans (Revised: January 05, 2015) #hamradio https://t.co/uHVFGJTHyg https://t.co/1kGKs2IstZ" /

Hi, I’ve just received a used ID-1 that I bought off of eBay. ?Strangely, I can only tune from 1260 MHz to 1300 MHz. ?All the documentation I can find says that the range should be 1240-1300 MHz.

internet connectivity is working? with G3 but the Mtu? must be smaler than 1412 , mine is 1200?? . This is to avoid jumbo packet . Hello Gents, Here is the reply from ICOM America DSTAR system

Tidbit that may help clarify, the radio doesn’t have an IP address. If you registered on a G2 gateway, then the address was listed when you registered. If you don’t know what it is, you can

Hello All, I am trying to connect a laptop to my IC-9700 setup in DD mode. The radio is connected to WX4GPB module A. How does one find the static address assigned to the laptop? I have found

ARRL/TAPR Digital Communications Conference (DCC) September 17-18, 2021? Virtual (Online)? ARRL / TAPR DCC Conference / Forum Schedule (Tentative) ARRL / TAPR Virtual (Online) DCC

Erik, Good point. If ppl already have 9700s for other purposes, though, and are looking for another use, then 23cm might be considered since it's already "in the box". That's what some of us locally