|
3 Blocks On Texture SB Tut Template ? Elaine's Artistry Ginger ? Pamela House, tubed by Kathy Written by Elaine (?Elaine's Artistry) January 2021 This tutorial is my own creation. Any resemblance to any other tutorial is unintentional and coincidental. Tip: If using my templates for tags you may resize and add borders if you like. I do require a credit on your tag for the template. Template ? EA Written for PSP 9 but should work in other versions of PSP with minor adjustments. Skill Level: Intermediate Supplies Needed: Tube of your choice Taller than wide will work best. Template- 3 blocks on texture templatea.pspimage (Available Here and Here) Texture - linenPOP. jpg (Available Here and Here) Preparation: Save the Texture in your PSP Texture Folder Open the 3 blocks on texture templatea.pspimage in PSP. Minimize for now. Performance Notes: For users of PSP X and higher: If your Manual Color Correction icon is not visible on your toolbar you may wish to do the following to place the icon on your toolbar for future use: View > Customize In left pane scroll down and left click on All Commands. In the right-hand pane scroll until you find Manual Color Correction. Click and drag it to where you want it on your toolbar. All settings will remain the same unless otherwise stated. Let's have some fun.........:) 1. File > Open Open tube of your choice in PSP. 2. Window > Duplicate (Shift+D) Close original. 3. Image > Resize Settings: Resample using = Smart Size Lock aspect ratio = Checked Resize all layers = Checked Width = Will self-adjust Height = 365 pixels or less *Note: We will be able to resize again later in the tut if need be. 4. Adjust > Sharpness > Unsharp Mask Settings: Radius = 5.00 Strength = 10 Clipping = 5 Luminance only = Unchecked (If needed) 5. Dropper Tool Left click and select a light color for the Foreground color. Right click and select a med. dark color for the Background color. Very important tip: When selecting colors it is important to select colors that coordinate, a light and darker shade from same color are recommended for a neat looking letter. Also with the font when adding text etc. if using a dark background then select a light color or dark color on light background. 6. Edit > Copy Minimize your tube for now. 7. Activate the 3 blocks on texture templatea.pspimage 8. Window > Duplicate (Shift + D) Close original. 9. Layers Palette Highlight (Activate) Raster 2 10. Layers > Delete 11. Manual Color Correction Settings: Preset target color = Unchecked Manual target color = Checked Freehand selection = Unchecked Source = #c0c0c0 Target = Your Foreground (light) color *Note: In PSP version 9 and lower it will be Adjust > Color Balance > Manual Color Correction. 12. Edit > Paste > Paste As New Layer (Your Tube) 13. Move Tool Move your Tube to the position as desired. ****Optional You may resize your tube again and sharpen if needed. If you resize: Image > Resize Settings: Width & Height = as desired Use the percentage option and Resize and move to your liking. Resize all layers = Unchecked *Note - You may also choose to use your Raster Deform Tool to resize. If used be sure to click the Pan Tool Icon immediately afterwards to deactivate the Raster Deform Tool. 14. Effects > 3D Effects > Inner Bevel Settings: Bevel = #2 Width = 8 Smoothness = 0 Depth = 2 Ambience = 10 Shininess = 0 Color = White Angle = 315 Intensity = 30 Elevation = 50 15. Effects > 3D Effects > Drop Shadow Settings: Vertical = 0 Horizontal = 0 Opacity = 68 Blur = 8.00 Color = Black Shadow on new layer = Unchecked ****Optional You may add any accents/elements or text at this time. Be sure to add Bevels and Drop Shadow of your choice. 16. Layers > Merge > Merge Visible 17. Image > Canvas Size Settings: Width = 3000 pixels (or your choice) Height = 400 pixels Placement = Left middle arrow 18. Effects > 3D Effects > Drop Shadow Settings: Vertical = 0 Horizontal = 6 Opacity = 44 Blur = 10.00 Color = Black Shadow on new layer = Checked 19. Effects > Image Effects > Seamless Tiling Settings: Edge = Checked Vertical = Checked Width = 50 Transi
|
|
Block Inside SB Tut Tube by Sylvie (no website known) Artist unknown Written by Elaine (Elaine's Artistry) January 2021 This tutorial was written from my own ideas and resemblance to another tutorial is purely coincidental. This tutorial was written for PSP 9. (Other versions should work with some minor adjustments.) Skill Level: Intermediate Supplies Needed: Tube of your choice 3 different Textures L Wood.jpg @nn_250410_TXT_031_tdstudio.jpg EF_sibermuster.jpg Picture tube - black dotted lines All supplies (Here and Here) Plugins: No outside plugins used Notes: This tutorial assumes you have a working knowledge of PSP. Preparation: Save the 3 Textures in your PSP Texture Folder Save the black dotted lines in your Picture Tube Folder All settings will remain the same unless otherwise stated. 1. File > Open Open your tube/mist 2. Windows > Duplicate (Shift+D) 3. Image > Resize Settings: Resample using = Bicubic Lock aspect ratio = Checked Resize all layers = Checked Width = will self adjust Height = No greater than 270 pixels *Note we can resize this again later if need be. 4. Adjust > Sharpness > Unsharp Mask Settings: Radius = 5.00 Strength = 10 Clipping = 5 Luminance only = Unchecked (If needed) 5. Dropper Tool: Left click and select a very light color for your Foreground color. Right click and select a medium color for your Background. Dark colors will not look good for this tutorial. *Note: Be sure your two colors have contrast. 6. Edit > Copy 7. Minimize your tube Let's get started! 1. File > New Image Settings: Width = 400 Height = 400 Raster Background Transparent 2. Selection Tool > Custom selection Settings: Top = 0 Left = 0 Right = 115 Bottom = 400 3. Flood Fill Tool Settings: Match Mode = RGB Value Use all layers = Unchecked Tolerance = 0 Blend Mode = Normal Opacity = 100 Right click to fill with Background (dark) color 4. Effects > Texture Effects > Texture Settings: Texture = L Wood.jpg Size = 35 Smoothness = 0 Depth = 2 Ambience = 10 Shininess = 0 Color = White Angle = 315 Intensity = 50 Elevation = 30 5. Selections > Select None 6. Effects > Edge Effects > Enhance 7. Effects > Image Effects > Seamless Tiling Settings: Edge = Checked Vertical = Checked Width = 50 Transition = 50 8. Layers > New Raster Layer 9. Selection Tool > Custom selection Settings: Top = 28 Left = 31 Right = 351 Bottom = 365 10. Flood Fill Tool Left click to fill with Background (dark) color 11. Effects > Texture Effects > Texture Settings: @nn_250410_TXT_031_tdstudio.jpg Size = 25 All other settings remain the same 12. Selections > Select None 13. Effects > Image Effects > Offset Settings: Horizontal offset = 0 Vertical offset = -3 (minus) Transparent = Checked 14. Effects > 3D Effects > Inner Bevel Settings: Bevel = #2 Width = 8 Smoothness = 0 Depth = 2 Ambience = 10 Shininess = 0 Color = White Angle = 315 Intensity = 30 Elevation = 50 15. Effects > 3D Effects > Drop Shadow Settings: Vertical = 0 Horizontal = 6 Opacity = 40 Blur = 15.00 Color = Black Shadow on new layer = Unchecked 16. Layers > New Raster Layer 17. Picture Tube Tool > black dotted lines Settings: black dotted lines Style = 100 Step = 200 Placement mode = Random Selection mode = Random Click fairly close to left side of the large box 18. Move Tool Using your move tool line the dots up to the left side to your liking. (See screenshot below as to how it should look) 19. Edit > Paste > Paste As New Layer (your tube) 20. Move Tool Move tube to your desired position *Note: If using a mist skip steps 21 and 22 21. Effects > 3D Effects > Inner Bevel 22. Effects > 3D Effects > Drop Shadow Settings: Vertical = 3 ****Optional You may resize your tube again and sharpen if needed ****Optional You may add any accents/elements or text at this time. Be sure to add Bevels and Drop Shadow of your choice 23. Image > Canvas Size Settings: Width = 3000 (or your choice) Height = 400 Placement = left middle arrow 24. Layers > New Raster Layer 25. Layers > Arrange > Send To Bottom 26. Flood Fill Tool Left click to fill with you Background (dark) color 27. Effects > Texture Effects > Texture
|
|
Dots On The Side SB Tut Tube and Template ? Elaine's Artistry Written by Elaine (?Elaine's Artistry) November 2021 This tutorial is my own creation. Any resemblance to any other tutorial is unintentional and coincidental. Tip: If using my templates for tags you may resize and add borders if you like. I do require a credit on your tag for the template. DO NOT COVER UP OR ERASE MY WATER MARK Written for PSP 9 but should work in other versions of PSP with minor adjustments. Skill Level: Intermediate Supplies Needed: Tube/mist of your choice Template - dots on the side templatea.pspimage (Available Here and Here) Texture - Corel_15_036 Preparation: Save the Texture in your PSP Texture Folder Open the dots on side templatea.pspimage in PSP. Minimize for now. Performance Notes: For users of PSP X and higher: If your Manual Color Correction icon is not visible on your toolbar you may wish to do the following to place the icon on your toolbar for future use: View > Customize In left pane scroll down and left click on All Commands. In the right-hand pane scroll until you find Manual Color Correction. Click and drag it to where you want it on your toolbar. All settings will remain the same unless otherwise stated. Let's have some fun.........:) 1. File > Open Open tube/mist of your choice in PSP. 2. Window > Duplicate (Shift+D) Close original. 3. Image > Resize Settings: Resample using = Smart Size Lock aspect ratio = Checked Resize all layers = Checked Width = Will self adjust Height = 365 pixels or less *Note: We will be able to resize again later in the tut if need be. 4. Adjust > Sharpness > Unsharp Mask Settings: Radius = 5.00 Strength = 10 Clipping = 5 Luminance only = Unchecked (If needed) 5. Dropper Tool Left click and select a light color for the Foreground color. Right click and select a med. dark color for the Background color. Very important tip: When selecting colors, it is important to select colors that coordinate, a light and darker shade from same color are recommended for a neat looking letter. Also, with the font when adding text etc. if using a dark background then select a light color or dark color on light background. 6. Edit > Copy Minimize your tube for now. 7. Activate the dots on the side templatea.pspimage 8. Window > Duplicate (Shift + D) Close original. 9. Layers Palette Highlight (Activate) Raster 2 10. Layers > Delete 11. Manual Color Correction Settings: Preset target color = Unchecked Manual target color = Checked Freehand selection = Unchecked Source = #c0c0c0 Target = Your Foreground (light) color *Note: In PSP version 9 and lower it will be Adjust > Color Balance > Manual Color Correction 12. Edit > Paste > Paste As New Layer (Your Tube) 13. Move Tool Move your Tube to the position as desired. ****Optional You may resize your tube again and sharpen if needed. If you resize: Image > Resize Settings: Width & Height = as desired Use the percentage option and Resize and move to your liking. Resize all layers = Unchecked *Note - You may also choose to use your Raster Deform Tool to resize. If used be sure to click the Pan Tool Icon immediately afterwards to deactivate the Raster Deform Tool *Note: If using a mist skip steps 14 and 15. 14. Effects > 3D Effects > Inner Bevel Settings: Bevel = #2 Width = 8 Smoothness = 0 Depth = 2 Ambience = 10 Shininess = 0 Color = White Angle = 315 Intensity = 30 Elevation = 50 15. Effects > 3D Effects > Drop Shadow Settings: Vertical = 3 Horizontal = 6 Opacity = 40 Blur = 15.00 Color = Black Shadow on new layer = Unchecked ****Optional You may add any accents/elements or text at this time. Be sure to add Bevels and Drop Shadow of your choice. 16. Layers > Merge > Merge visible 17. Image > Canvas Size Settings: Width = 3000 pixels (or your choice) Height = 400 pixels Placement = Left middle arrow 18. Effects > 3D Effects > Drop Shadow Settings: Vertical = 0 Horizontal = 6 Opacity = 44 Blur = 10.00 Color = Black Shadow on new layer = Checked 19. Effects > Image Effects > Seamless Tiling Settings: Edge = Checked Vertical = Checked Width = 50 Transition = 50 20. Layers >
|
|
ABC BLOCK TUT Template ? Elaine's Artistry Graphic artist unknown (no ? infringement intended) Written by Elaine (?Elaine's Artistry) July 2021 This tutorial is my own creation. Any resemblance to any other tutorial is unintentional and coincidental. Tip: If using my templates for tags you may resize and add borders if you like. I do require a credit on your tag for the template. DO NOT COVER UP OR ERASE MY WATER MARK Written for PSP 9 but should work in other versions of PSP with minor adjustments. Skill Level: Intermediate Supplies Needed: Tube/mist of your choice Template - abc block templatea.pspimage (Available Here and Here) Plugins: No outside plugins used Preparation: Open the abc block templatea.pspimage in PSP. Minimize for now. Performance Notes: For users of PSP X and higher: If your Manual Color Correction icon is not visible on your toolbar you may wish to do the following to place the icon on your toolbar for future use: View > Customize In left pane scroll down and left click on All Commands. In the right hand pane scroll until you find Manual Color Correction. Click and drag it to where you want it on your toolbar. All settings will remain the same unless otherwise stated. Let's have some fun.........:) 1. File > Open Open tube/mist of your choice in PSP. 2. Window > Duplicate (Shift+D) Close original. 3. Image > Resize Settings: Resample using = Smart Size Lock aspect ratio = Checked Resize all layers = Checked Width = Will self-adjust Height = 365 pixels or less *Note: We will be able to resize again later in the tut if need be. 4. Adjust > Sharpness > Unsharp Mask Settings: Radius = 5.00 Strength = 10 Clipping = 5 Luminance only = Unchecked (If needed) 5. Dropper Tool Left click and select a light color for the Foreground color. Right click and select a med. dark color for the Background color. Very important tip: When selecting colors it is important to select colors that coordinate, a light and darker shade from same color are recommended for a neat looking letter. Also, with the font when adding text etc. if using a dark background then select a light color or dark color on light background. 6. Edit > Copy Minimize your tube for now. 7. Activate the abc block templatea.pspimage 8. Window > Duplicate (Shift + D) Close original. 9. Layers Palette Highlight (Activate) Raster 3 10. Layers > Delete 11. Layers Palette Highlight (Activate) Raster 1 12. Manual Color Correction Settings: Preset target color = Unchecked Manual target color = Checked Freehand selection = Unchecked Source = #c0c0c0 Target = Your Foreground (light) color *Note: In PSP version 9 and lower it will be Adjust > Color Balance > Manual Color Correction. 13. Adjust > Add/Remove Noise > Add Noise Settings: Gaussian = Checked Noise = 6 Monochrome = Checked 14. Layers Palette Highlight (Activate) Raster 2 15. Manual Color Correction Settings: Target = Your Background (dark) color 16. Edit > Paste > Paste As New Layer (Your Tube) 17. Move Tool Move your Tube to the position as desired. ****Optional You may resize your tube again and sharpen if needed. If you resize: Image > Resize Settings: Width & Height = as desired Use the percentage option and Resize and move to your liking. Resize all layers = Unchecked *Note - You may also choose to use your Raster Deform Tool to resize. If used be sure to click the Pan Tool Icon immediately afterwards to deactivate the Raster Deform Tool *Note: If using a mist skip steps 18 and 19. 18. Effects > 3D Effects > Inner Bevel Settings: Bevel = #2 Width = 8 Smoothness = 0 Depth = 2 Ambience = 10 Shininess = 0 Color = White Angle = 315 Intensity = 30 Elevation = 50 19. Effects > 3D Effects > Drop Shadow Settings: Vertical = 3 Horizontal = 6 Opacity = 40 Blur = 15.00 Color = Black Shadow on new layer = Unchecked ****Optional You may add any accents/elements or text at this time. Be sure to add Bevels and Drop Shadow of your choice. 20. Layers > Merge > Merge visible 21. Image > Canvas Size Settings: Width = 3000 pixels (or your choice) Height = 400 pixels Placement = Left middle arrow 22. Effects > 3D Effec
|
|
Vintage tube artist unknown Written by Elaine (?Elaine's Artistry) February 2021 This tutorial is my own creation. Any resemblance to any other tutorial is unintentional and coincidental. Tip: If using my templates for tags you may resize and add borders if you like. I do require a credit on your tag for the template. Template ? EA Written for PSP 9 but should work in other versions of PSP with minor adjustments. Skill Level: Intermediate Supplies Needed: Tube of your choice Taller than wide will work best. Template dilated_noise templatea.pspimage (Available Here and Here) Preparation: Open the dilated_noise templatea.pspimage in PSP. Minimize for now. Performance Notes: For users of PSP X and higher: If your Manual Color Correction icon is not visible on your toolbar you may wish to do the following to place the icon on your toolbar for future use: View > Customize In left pane scroll down and left click on All Commands. In the right hand pane scroll until you find Manual Color Correction. Click and drag it to where you want it on your toolbar. All settings will remain the same unless otherwise stated. Let's have some fun.........:) 1. File > Open Open tube of your choice in PSP. 2. Window > Duplicate (Shift+D) Close original. 3. Image > Resize Settings: Resample using = Smart Size Lock aspect ratio = Checked Resize all layers = Checked Width = Will self adjust Height = 365 pixels or less *Note: We will be able to resize again later in the tut if need be. 4. Adjust > Sharpness > Unsharp Mask Settings: Radius = 5.00 Strength = 10 Clipping = 5 Luminance only = Unchecked (If needed) 5. Dropper Tool Left click and select a light color for the Foreground color. Right click and select a med. dark color for the Background color. Very important tip: When selecting colors it is important to select colors that coordinate, a light and darker shade from same color are recommended for a neat looking letter. Also with the font when adding text etc. if using a dark background then select a light color or dark color on light background. 6. Edit > Copy Minimize your tube for now. 7. Activate the dilated_noise templatea.pspimage 8. Window > Duplicate (Shift + D) Close original. 9. Layers Palette Highlight (Activate) Raster 2 10. Layers > Delete 11. Manual Color Correction Settings: Preset target color = Unchecked Manual target color = Checked Freehand selection = Unchecked Source = #c0c0c0 Target = Your Foreground (light) color *Note: In PSP version 9 and lower it will be Adjust > Color Balance > Manual Color Correction. 12. Edit > Paste > Paste As New Layer (Your Tube) 13. Move Tool Move your Tube to the position as desired. ****Optional You may resize your tube again and sharpen if needed. If you resize: Image > Resize Settings: Width & Height = as desired Use the percentage option and Resize and move to your liking. Resize all layers = Unchecked *Note - You may also choose to use your Raster Deform Tool to resize. If used be sure to click the Pan Tool Icon immediately afterwards to deactivate the Raster Deform Tool. 14. Effects > 3D Effects > Inner Bevel Settings: Bevel = #2 Width = 8 Smoothness = 0 Depth = 2 Ambience = 10 Shininess = 0 Color = White Angle = 315 Intensity = 30 Elevation = 50 15. Effects > 3D Effects > Drop Shadow Settings: Vertical = 0 Horizontal = 0 Opacity = 68 Blur = 8.00 Color = Black Shadow on new layer = Unchecked ****Optional You may add any accents/elements or text at this time. Be sure to add Bevels and Drop Shadow of your choice. 16. Layers > Merge > Merge Visible 17. Image > Canvas Size Settings: Width = 3000 pixels (or your choice) Height = 400 pixels Placement = Left middle arrow 18. Effects > 3D Effects > Drop Shadow Settings: Vertical = 0 Horizontal = 6 Opacity = 44 Blur = 10.00 Color = Black Shadow on new layer = Checked 19. Effects > Image Effects > Seamless Tiling Settings: Edge = Checked Vertical = Checked Width = 50 Transition = 50 20. Layers > New Raster Layer 21. Layers > Arrange > Send to Bottom 22. Flood Fill Tool Left click to fill with your Background (dark) color. 23. Adjust > Add/Remove No
|
|
Gradient Block SB Tut Template ? Elaine's Artistry Graphic artist unknown (no ? infringement intended) Written by Elaine (?Elaine's Artistry) January 2021 This tutorial is my own creation. Any resemblance to any other tutorial is unintentional and coincidental. Tip: If using my templates for tags you may resize and add borders if you like. I do require a credit on your tag for the template. DO NOT COVER UP OR ERASE MY WATER MARK Written for PSP 9 but should work in other versions of PSP with minor adjustments. Skill Level: Intermediate Supplies Needed: Tube/mist of your choice Template - gradient block templatea.pspimage (Available Here and Here) Plugins: penta.com - color dot (Available Here) Preparation: Install plugin, if needed Open the gradient block templatea.pspimage in PSP. Minimize for now. Performance Notes: For users of PSP X and higher: If your Manual Color Correction icon is not visible on your toolbar you may wish to do the following to place the icon on your toolbar for future use: View > Customize In left pane scroll down and left click on All Commands. In the right hand pane scroll until you find Manual Color Correction. Click and drag it to where you want it on your toolbar. All settings will remain the same unless otherwise stated. Let's have some fun.........:) 1. File > Open Open tube/mist of your choice in PSP. 2. Window > Duplicate (Shift+D) Close original. 3. Image > Resize Settings: Resample using = Smart Size Lock aspect ratio = Checked Resize all layers = Checked Width = Will self adjust Height = 365 pixels or less *Note: We will be able to resize again later in the tut if need be. 4. Adjust > Sharpness > Unsharp Mask Settings: Radius = 5.00 Strength = 10 Clipping = 5 Luminance only = Unchecked (If needed) 5. Dropper Tool Left click and select a light color for the Foreground color. Right click and select a med. dark color for the Background color. Very important tip: When selecting colors it is important to select colors that coordinate, a light and darker shade from same color are recommended for a neat looking letter. Also with the font when adding text etc. if using a dark background then select a light color or dark color on light background. 6. Edit > Copy Minimize your tube for now. 7. Activate the gradient block templatea.pspimage 8. Window > Duplicate (Shift + D) Close original. 9. Layers Palette Highlight (Activate) Raster 4 10. Layers > Delete 11. Layers Palette Highlight (Activate) Raster 1 12. Manual Color Correction Settings: Preset target color = Unchecked Manual target color = Checked Freehand selection = Unchecked Source = #c0c0c0 Target = Your Foreground (light) color *Note: In PSP version 9 and lower it will be Adjust > Color Balance > Manual Color Correction. 13. Layers Palette Highlight (Activate) Raster 2 14. Manual Color Correction 15. Layers Palette Highlight (Activate) Raster 3 16. Manual Color Correction Settings: Target = Your Background (dark) color 17. Edit > Paste > Paste As New Layer (Your Tube) 18. Move Tool Move your Tube to the position as desired. ****Optional You may resize your tube again and sharpen if needed. If you resize: Image > Resize Settings: Width & Height = as desired Use the percentage option and Resize and move to your liking. Resize all layers = Unchecked *Note - You may also choose to use your Raster Deform Tool to resize. If used be sure to click the Pan Tool Icon immediately afterwards to deactivate the Raster Deform Tool *Note: If using a mist skip steps 19 and 20. 19. Effects > 3D Effects > Inner Bevel Settings: Bevel = #2 Width = 8 Smoothness = 0 Depth = 2 Ambience = 10 Shininess = 0 Color = White Angle = 315 Intensity = 30 Elevation = 50 20. Effects > 3D Effects > Drop Shadow Settings: Vertical = 3 Horizontal = 6 Opacity = 40 Blur = 15.00 Color = Black Shadow on new layer = Unchecked ****Optional You may add any accents/elements or text at this time. Be sure to add Bevels and Drop Shadow of your choice. 21. Layers > Merge > Merge visible 22. Effects > 3D Effects > Inner Bevel 23. Image > Canvas Size Settings: Width = 3000 pixels (or your
|
|
Flip and Mirror SB Tut Poser ? Pat at PannsPlace Written by Elaine (?Elaine's Artistry) August 2014 This tutorial is my own creation. Any resemblance to any other tutorial is unintentional and coincidental. Written for PSP 9 Skill Level: Intermediate Supplies Needed: Tube of your choice Plugin: Simple - Diamonds - Top Left Mirror - Zoom Out and Flip (Here) Preparation: Install plugin if needed. Performance Notes: All settings will remain the same unless otherwise stated. Let's have some fun.........:) 1. File > Open Open tube of your choice in PSP. 2. Window > Duplicate (Shift+D) Close original. 3. Image > Resize Settings: Resample using = Smart Size Lock aspect ratio = Checked Resize all layers = Checked Width = Will self-adjust Height = 350 pixels or less 4. Adjust > Sharpness > Unsharp Mask Settings: Radius = 5.00 Strength = 10 Clipping = 5 Luminance only = Unchecked (If needed) 5. Dropper Tool Left click and select a light color for the Foreground color. Right click and select a dark color for the Background color. *Note - Your colors should have plenty of contrast yet go well together. 6. Edit > Copy Minimize your tube. 7. File > New Image Settings: Width = 30 pixels Height = 400 pixels Raster Background = Checked Transparent = Checked 8. Materials Palette Change Foreground to Gradient Settings: Gradient = Foreground-Background Style = Radial Angle = 45 Repeats = 52 Invert = Unchecked Center Point Horizontal = 25 Vertical = 75 Texture = Unchecked 9. Flood Fill Tool Settings: Match Mode = None Use all layers = Unchecked Blend mode = Normal Opacity = 100 Left click to fill with Gradient. 10. Effects > Plugin > Simple > Diamonds 11. Layers > Duplicate 12. Image > Mirror 13. Layers Palette Lower Opacity to 50 14. Layers > Merge > Merge Visible 15. Effects > Edge Effects > Enhance 16. Effects > Plugin > Simple > Top Left Mirror 17. Image > Canvas Size Settings: Width = 200 pixels Height = 400 pixels Placement = Left middle arrow 18. Effects > 3D Effects > Drop Shadow Settings: Vertical = 0 Horizontal = 3 Opacity = 30 Blur = 5.00 Color = Black Shadow on new layer = Checked 19. Effects > Image Effects > Seamless Tiling Settings: Edge = Checked Vertical = Checked Width = 50 Transition = 50 *Note: Only the shadow layer will be tiled. 20. Layers > Merge > Merge Visible 21. Layers > Duplicate 22. Image > Mirror 23. Layers > Merge > Merge Visible 24. Layers > New Raster Layer 25. Layers > Arrange > Send to Bottom 26. Flood Fill Tool Settings: Left click to fill with Gradient 27. Adjust > Add/Remove Noise > Add Noise Settings: Gaussian = Checked Noise = 7 Monochrome = Checked 28. Effects > Distortion Effects > Pixelate Settings: Block width = 35 Block height = 35 Symmetric = Checked 29. Layers > Merge > Merge Visible 30. Image > Canvas Size Settings: Width = 2000 pixels (or your choice) Height = 400 pixels Placement = Left middle arrow 31. Effects > 3D Effects > Drop Shadow Settings: Blur = 10.00 32. Effects > Image Effects > Seamless Tiling 33. Layers > New Raster Layer 34. Layers > Arrange > Send to Bottom 35. Flood Fill Tool Settings: Left click to fill with Gradient 36. Effects > Plugin > Simple > Zoom Out and Flip 37. Edit > Repeat Zoom Out and Flip 38. Effects > Image Effects > Seamless Tiling Settings: Corner = Checked Horizontal = Checked Horizontal offset = 0 Transition = 50 39. Layers > Duplicate 40. Image > Flip 41. Image > Mirror 42. Layers Palette Lower Opacity to 50 ***Optional If your background is still not text-friendly add a new Raster Layer, fill with your background color and lower the Opacity to your liking. 43. Edit > Paste > Paste As New Layer (Your Tube) 44. Layers > Arrange > Bring to Top ***Optional You may resize your tube again and sharpen if needed. If you resize: Image > Resize Settings: Width & Height = as desired Resize all layers = Unchecked Use the percentage option and Resize and move to your liking. *Note: You may also choose to use your Raster Deform Tool to resize. If used be sure to click the Pan Tool Icon immediately afterwards to deactivate the Raster Deform Tool. 45. Move Tool Move your
|
|
Infini Tiles SB Tut Poser ? Gerda - http://gerdas-villa-kunterbunt.blogspot.de/ Written by Elaine (?Elaine's Artistry) May 2014 This tutorial is my own creation. Any resemblance to any other tutorial is unintentional and coincidental. Written for PSP 9 Skill Level: Intermediate Supplies Needed: Tube of your choice Plugin: Filter Factory Gallery D - Infini Tiles Available (Here) Preparation: Install plugin if needed. Performance Notes: All settings will remain the same unless otherwise stated. Let's have some fun.........:) 1. File > Open Open tube of your choice in PSP. 2. Window > Duplicate (Shift+D) Close original. 3. Image > Resize Settings: Resample using = Smart Size Lock aspect ratio = Checked Resize all layers = Checked Width = Will self-adjust Height = 350 pixels or less 4. Adjust > Sharpness > Unsharp Mask Settings: Radius = 5.00 Strength = 10 Clipping = 5 Luminance only = Unchecked (If needed) 5. Dropper Tool Left click and select a light color for the Foreground color. Right click and select a dark color for the Background color. *Note - Your colors should have plenty of contrast yet go well together. 6. Edit > Copy Minimize your tube. 7. File > New Image Settings: Width = 300 pixels Height = 400 pixels Raster Background = Checked Transparent = Checked 8. Selection Tool > Custom selection Settings: Top = 0 Left = 10 Right = 110 Bottom = 400 9. Layers > New Raster Layer 10. Flood Fill Tool Settings: Match Mode = None Use all layers = Unchecked Blend mode = Normal Opacity = 100 Right click to fill with your (dark) Background color. 11. Selections > Select None 12. Plugin > Filter Factory Gallery D > Infini Tiles Settings: X Divisions = 6 Y Divisions = 2 X Tiling selector = 0 Y Tiling selector = 0 13. Effects > 3D Effects > Drop Shadow Settings: Vertical = 0 Horizontal = 0 Opacity = 60 Blur = 6.00 Color = Black Shadow on new layer = Unchecked 14. Selection Tool > Custom selection Settings: Left = 25 Right = 90 15. Layers > New Raster Layer 16. Flood Fill Tool Left click to fill with your (light) Foreground color. 17. Selections > Select None 18. Plugin > Filter Factory Gallery D > Infini Tiles 19. Effects > 3D Effects > Inner Bevel Settings: Bevel = 2 Width = 8 Smoothness = 0 Depth = 2 Ambience = 10 Shininess = 0 Color = White Angle = 315 Intensity = 30 Elevation = 50 20. Effects > 3D Effects > Drop Shadow 21. Layers > Merge > Merge Down 22. Effects > Image Effects > Seamless Tiling Settings: Edge = Checked Vertical = Checked Width = 50 Transition = 50 23. Edit > Paste > Paste As New Layer (Your Tube) 24. Effects > 3D Effects > Inner Bevel 25. Effects > 3D Effects > Drop Shadow 26. Layers > Merge > Merge Down 27. Image > Canvas Size Settings: Width = 2000 pixels (or your choice) Height = 400 pixels Placement = Left middle arrow 28. Layers Palette Select bottom layer (Raster 1) 29. Flood Fill Tool Left click to fill with your (light) Foreground color. 30. Effects > Texture Effects > Blinds Settings: Width = 4 Opacity = 46 Color = Background (dark) color Horizontal = Unchecked Light from left/top = Checked ***Optional If your background is not text-friendly add a new Raster Layer, fill with your foreground color and lower the Opacity to your liking. 31. Layers > New Raster Layer 32. Layers > Arrange > Bring to Top 33. Add your Watermark and credits. 34. File > Export > JPEG Optimizer Settings: Compression = 15-20 (or your choice). That's it...You can now assemble in LC. Thank you for trying my tutorial. I hope you enjoyed doing the tutorial. If you have any questions or if you'd like to share your results you can email me at netsoffaith@... Please include my name Elaine's Artistry as Author and Tutorial name on your credits. Please link any creations made from this tutorial back to: http://tech.groups.yahoo.com/group/elainesartistrydesigns "Thank You" to the awesome people who take their time to test my tutorials. I very much appreciate them for all they do to help me. Dale (TippyD Creations) JanetB (JanetB Creations) Joyce M (JoyCreations) Maddie (Maddie's Designs) Meesa (Meesa's Meanders) Marcy (Marcy's Designs)
|
|
Hugs, Sharon Stat By Sharecuzicare Font Used: Melinda Tut By Jetty Zig Zag Tutorial HERE My Groups: Sharecuzicare Creations SLS Stat Corner Classic Stats(OE Classic) PSPTubesNMore2 Seasons&HolidayFun
|
|
Hugs, Sharon Stat By Sharecuzicare Font Used: Sweet Brownie Tut By SED Linen Blur Tut (Group Closed) My Groups: Sharecuzicare Creations SLS Stat Corner Classic Stats(OE Classic) PSPTubesNMore2 Seasons&HolidayFun
|
|
Group Shared Graphic Tut by Creationsby JewelsGems Font Tiny Love Script
|
|
Rae's Stationery Creation _ _ Brenda's AL _ Tut _ ? Brenda _ Tiptoe Through The Tulips FREE Animations for your email - by IncrediMail Click Here! ?
|
|
|
|
|
|
Rae's Stationery Creation _ _ Kate's AL _ _ Fractal BG ?Bee's Creation FREE Animations for your email Click Here!
|
|
|
|
MY AI CREATION Tut by ACFC (Closed) Font Candyland
|
|
Thanks for looking. Hugs and Blessings, Chris Snow^i^Creations "Splish Splash Pup" AI Tube by Brenda Linene Blur Tut by SED Tutorials Site Closed
|
|
|
|
|
Image Name
Sat 8:39am
Sat 8:39am