开云体育

Would some on the list please point me towards the latest available version
of STEPSTER.
We have currently 163 members in the list, please feel free to invite anyone
that you know that might be interested to join us.
I got lucky yesterday got 2 Compumotor, 400 in/oz. steppers for $25 each,
with couplers.
No howling feedback on the selling, so guess we did not step on too many toes.
bill

Here is the link....
Be aware...the limit switches don't work with these version. A fix is on the
way...
Dave
<A href=">METALWORKING.COM -
Shareware
</A>

I await....It'll be worth it!
Dave

In a message dated 5/27/99 2:53:57 PM Pacific Daylight Time, DRigotti@...
writes:

Here is the link....
Be aware...the limit switches don't work with these version. A fix is on
the
way...
Dave
<A href=">METALWORKING.COM -
Shareware
</A>

I just want to down load Stepster and start to learn it. I went to the URL
above, is the Stepster, the same as the CNC 979.Zip, or the 981.Zip?
Or is it one of the other programs?
Do I need to run this under DOS? Any hints/directions to get it started
would be greatly appreciated. Not as computer literate as I would like to be.
bill

Dave,
Yep, maybe this weekend for an Alpha version (Meaning, "Did I break
anything, and does it still work") watch your mail <g>

Charlie

At 05:42 PM 5/27/99 EDT, you wrote:

From: DRigotti@...

Here is the link....
Be aware...the limit switches don't work with these version. A fix is on

the

way...
Dave
<A href=">METALWORKING.COM -
Shareware
</A>

------------------------------------------------------------------------
Where do some of the Internet's largest email lists reside?

At ONElist - the most scalable and reliable service on the Internet.
------------------------------------------------------------------------
welcome to CAD_CAM_EDM_DRO@..., an unmodulated list for the

discussion of shop built systems in the above catagories.

PGP Key Avalible upon request

Bill,
Download .981. Its DOS...BUT you can run it in a window!
Read the Readme....
Dave

In a message dated 5/27/99 11:34:42 PM Pacific Daylight Time,
DRigotti@... writes:

Download .981. Its DOS...BUT you can run it in a window!
Read the Readme....

Thank you for the pointer. I have downloaded it, and printed the readme, so
can start studying.
What program is suggested for the lathe? Could Stepster be used by only
using the X and Z axis? Making allowances for radius/diameter.
Also does anyone on the list have a copy of the schematic that is referred to
in the Stepster comments? If so would it be possible to get a copy?
bill