开云体育

What ever happened to the Nuts and Volts cnc article that was to air
in the Nov. issue?


Brian

--- In CAD_CAM_EDM_DRO@y..., "bdrmachine" <bdrmachine@h...> wrote:

What ever happened to the Nuts and Volts cnc article that was to

air

in the Nov. issue?

Now scheduled for the December issue.


Best Regards,
Fred Smith- IMService

Listserve Special discounts and offers are at:


Today is the last day for the 3D surfacing special.

There is also an article in Circuit Cellar November issue on using
Gecko drives in a CNC application.
The magazine can usually be found at Barnes and Noble or you can
download the article from their web site at www.circellar.com. It is
not posted yet but when it is will probably cost you $1.50.
The magazine is mainly for hard core Electronic Engineers. It is an
excellent magazine if you gravitate that way.

Regards,
James

Thanks

I've subcribed to Circuit Cellar since 91.

It's a good start but it appears to be rushed to print. The artical
is missing prints mentioned in the text.


--- In CAD_CAM_EDM_DRO@y..., "jameshudsondensi" <hudsonjames@y...>
wrote:

There is also an article in Circuit Cellar November issue on using
Gecko drives in a CNC application.
The magazine can usually be found at Barnes and Noble or you can
download the article from their web site at www.circellar.com. It

is

not posted yet but when it is will probably cost you $1.50.
The magazine is mainly for hard core Electronic Engineers. It is

an

excellent magazine if you gravitate that way.

Regards,
James

--- In CAD_CAM_EDM_DRO@y..., "Fred Smith" <imserv@v...> wrote:

--- In CAD_CAM_EDM_DRO@y..., "bdrmachine" <bdrmachine@h...>

wrote:

What ever happened to the Nuts and Volts cnc article that was

to

air

in the Nov. issue?

Now scheduled for the December issue.


Best Regards,
Fred Smith- IMService

Listserve Special discounts and offers are at:


Today is the last day for the 3D surfacing special.

That was one of the prime reasons for me to get a subscription. I was
interested in the "Heavy Metal" milling machine project. I even bought
a few back copies to get all the articles, a few months later the
author said he put the project on hold and would have a final article
at a later time. Well, my subscription is about to run out and still
no completed "Heavy Metal" project.

I am letting my subscription expire...

Although the price for a "home-built" might be close to a Homier
mini-mill. The motor, the controller, the X-Y table is about the price
for a ready built machine.