开云体育

CNC mill conversion to plasma cutter

William Blocher All Messages By This Member #99861 Hello Group, Just wondering what the down side would be to using my Haas VF2 and mounting a plasma cutter to the quill?? I was thinking of putting a 15 X 20 water tray on the table.? ?This must be a bad idea because I can't find anybody on YouTube that has done this.? I'd appreciate anybody's opinion.? ?I don't have experience with plasma cutters but I've got a customer with a lot of smaller parts (3/16 thick 304ss) that just wouldn't be practical to mill.? ? Thanks in advance, Bill
Lou Jackson All Messages By This Member #99862 开云体育 U might want to read this thread ...? From what I gather, cutting speed and proper grounding are the primary issues you might need to overcome. Lou toggle quoted message Show quoted text On Aug 11, 2024, at 11:01?AM, William Blocher <wjb1060@...> wrote: ? Hello Group, Just wondering what the down side would be to using my Haas VF2 and mounting a plasma cutter to the quill?? I was thinking of putting a 15 X 20 water tray on the table.? ?This must be a bad idea because I can't find anybody on YouTube that has done this.? I'd appreciate anybody's opinion.? ?I don't have experience with plasma cutters but I've got a customer with a lot of smaller parts (3/16 thick 304ss) that just wouldn't be practical to mill.? ? Thanks in advance, Bill
William Blocher All Messages By This Member #99863 开云体育 Thanks, I'll check it out. toggle quoted message Show quoted text On August 11, 2024 2:44:51 PM CDT, "Lou Jackson via groups.io" <lou@...> wrote: U might want to read this thread ...? From what I gather, cutting speed and proper grounding are the primary issues you might need to overcome. Lou On Aug 11, 2024, at 11:01?AM, William Blocher <wjb1060@...> wrote: ? Hello Group, Just wondering what the down side would be to using my Haas VF2 and mounting a plasma cutter to the quill?? I was thinking of putting a 15 X 20 water tray on the table.? ?This must be a bad idea because I can't find anybody on YouTube that has done this.? I'd appreciate anybody's opinion.? ?I don't have experience with plasma cutters but I've got a customer with a lot of smaller parts (3/16 thick 304ss) that just wouldn't be practical to mill.? ? Thanks in advance, Bill -- Sent from my Android device with K-9 Mail. Please excuse my brevity.

Previous Topic Next Topic