Keyboard Shortcuts
ctrl + shift + ? :
Show all keyboard shortcuts
ctrl + g :
Navigate to a group
ctrl + shift + f :
Find
ctrl + / :
Quick actions
esc to dismiss
Likes
Search
DRO Boards
|
I am considering discontinuing the Mauch/Kulaga DRO printed circuit
board for two reasons. Sales have been slow. Only 35 in 1 year and it was made for a rapidly disappearing ISA slot. I have one good board and 3 defective boards left. After the good board is sold I doubt that I will reorder them unless there is more interest in them. Dan |
|
macfool68
--- In CAD_CAM_EDM_DRO@y..., "Dan Mauch" <dmauch@s...> wrote:
it was made for a rapidly disappearing ISA slot.board is sold I doubt that I will reorder them unless there is moreinterest in them. I am interested in the Mauch/Kulaga DRO printed circuit board 3/4 axis kit if you have one available. If not, I am still interested in getting the plans, if you still sell those instead? Thank you in advance, Mac |
|
Van Der Sandt Coert
Hi Dan
toggle quoted message
Show quoted text
A friend asked me recently whether he can cnc his Collet mill that is already fitted with a dro system and drive motors. I don't know much about DRO's so excuse me for asking stupid questions. Currently you can move the axis' on the mill with a switch forward and back and read the position from the DRO. Would it be possible to hook this DRO up to a computer somehow that runs something like Turbocnc? If possible, what are the steps needed? Is that perhaps what your DRO boards do? Thanks Coert -----Original Message-----
From: macfool68 [mailto:gr8flyer7@...] --- In CAD_CAM_EDM_DRO@y..., "Dan Mauch" <dmauch@s...> wrote: it was made for a rapidly disappearing ISA slot.board is sold I doubt that I will reorder them unless there is moreinterest in them. Confidentiality Warning ======================= The contents of this e-mail and any accompanying documentation are confidential and any use thereof, in what ever form, by anyone other than the addressee is strictly prohibited. |
|
The plans don't include the pcb layout but here are the instructions.
toggle quoted message
Show quoted text
Dan -----Original Message-----
From: macfool68 [mailto:gr8flyer7@...] Sent: Tuesday, November 12, 2002 4:46 PM To: CAD_CAM_EDM_DRO@... Subject: [CAD_CAM_EDM_DRO] Re: DRO Boards --- In CAD_CAM_EDM_DRO@y..., "Dan Mauch" <dmauch@s...> wrote: it was made for a rapidly disappearing ISA slot.board is sold I doubt that I will reorder them unless there is moreinterest in them. I am interested in the Mauch/Kulaga DRO printed circuit board 3/4 axis kit if you have one available. If not, I am still interested in getting the plans, if you still sell those instead? Thank you in advance, Mac Addresses: FAQ: FILES: Post Messages: CAD_CAM_EDM_DRO@... Subscribe: CAD_CAM_EDM_DRO-subscribe@... Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@... List owner: CAD_CAM_EDM_DRO-owner@..., wanliker@... Moderator: jmelson@... timg@... [Moderator] URL to this group: OFF Topic POSTS: General Machining If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble. I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list. NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........ bill List Mom List Owner Your use of Yahoo! Groups is subject to |
|
macfool68
Dan,
Thanks for the reply. I looked carefully and I don't see any "instructions" on your recent message. Am I missing something? Sincerely yours, Mac --- In CAD_CAM_EDM_DRO@y..., "Dan Mauch" <dmauch@s...> wrote: The plans don't include the pcb layout but here are theinstructions. Dancircuit andboard for two reasons. Sales have been slow. Only 35 in 1 year itwas made for a rapidly disappearing ISA slot.board |
|
The DRO boards are all sold and like I said there wasn't enough sales to
toggle quoted message
Show quoted text
justify and outlay of $500 for more boards so the point is moot. But with deskncrt it was possible to shut off the power to the stepper motors and read the encoder positions like a dro. As I recall EMC will also do this. If you are running a stepper system using turbocnc and your system is running correctly then you don't need a dro. dan -----Original Message-----
From: Van Der Sandt Coert [mailto:vandersandtc@...] Sent: Tuesday, November 12, 2002 11:04 PM To: 'CAD_CAM_EDM_DRO@...' Subject: RE: [CAD_CAM_EDM_DRO] Re: DRO Boards Hi Dan A friend asked me recently whether he can cnc his Collet mill that is already fitted with a dro system and drive motors. I don't know much about DRO's so excuse me for asking stupid questions. Currently you can move the axis' on the mill with a switch forward and back and read the position from the DRO. Would it be possible to hook this DRO up to a computer somehow that runs something like Turbocnc? If possible, what are the steps needed? Is that perhaps what your DRO boards do? Thanks Coert -----Original Message----- From: macfool68 [mailto:gr8flyer7@...] --- In CAD_CAM_EDM_DRO@y..., "Dan Mauch" <dmauch@s...> wrote: it was made for a rapidly disappearing ISA slot.board is sold I doubt that I will reorder them unless there is moreinterest in them. Confidentiality Warning ======================= The contents of this e-mail and any accompanying documentation are confidential and any use thereof, in what ever form, by anyone other than the addressee is strictly prohibited. Addresses: FAQ: FILES: Post Messages: CAD_CAM_EDM_DRO@... Subscribe: CAD_CAM_EDM_DRO-subscribe@... Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@... List owner: CAD_CAM_EDM_DRO-owner@..., wanliker@... Moderator: jmelson@... timg@... [Moderator] URL to this group: OFF Topic POSTS: General Machining If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble. I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list. NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........ bill List Mom List Owner Your use of Yahoo! Groups is subject to |
|
My mistake. I thought this was off line email so the attachement was
toggle quoted message
Show quoted text
cut. I will email it off line. Dan -----Original Message-----
From: macfool68 [mailto:gr8flyer7@...] Sent: Wednesday, November 13, 2002 6:52 AM To: CAD_CAM_EDM_DRO@... Subject: [CAD_CAM_EDM_DRO] Re: DRO Boards Dan, Thanks for the reply. I looked carefully and I don't see any "instructions" on your recent message. Am I missing something? Sincerely yours, Mac --- In CAD_CAM_EDM_DRO@y..., "Dan Mauch" <dmauch@s...> wrote: The plans don't include the pcb layout but here are theinstructions. Dancircuit andboard for two reasons. Sales have been slow. Only 35 in 1 year itwas made for a rapidly disappearing ISA slot.board Addresses: FAQ: FILES: Post Messages: CAD_CAM_EDM_DRO@... Subscribe: CAD_CAM_EDM_DRO-subscribe@... Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@... List owner: CAD_CAM_EDM_DRO-owner@..., wanliker@... Moderator: jmelson@... timg@... [Moderator] URL to this group: OFF Topic POSTS: General Machining If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble. I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list. NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........ bill List Mom List Owner Your use of Yahoo! Groups is subject to |
|
Dan,
toggle quoted message
Show quoted text
Would you be willing to make the board files available on an "open sources" basis? That way if someone wants one they can either have a board made as a prototype or use one of the programs like DeskPCB to make the G-code to route one out. If you are willing I would be happy to add it to the Kulaga DRO site I host. Tim [Denver CO] Sherline at Deep Discount www.KTMarketing.com/Sherline ----- Original Message -----
The DRO boards are all sold and like I said there wasn't enough sales to |
|
j.guenther
Dam, I new I should have moved that up on my priority list. So much for
toggle quoted message
Show quoted text
smdromod and EMC on my setup! John Guenther 'Ye Olde Pen Maker' Sterling, Virginia -----Original Message----- |
|
aussiedude
Souns a bit like coke classic.
toggle quoted message
Show quoted text
Nobody missed it till its gone. So Dan, as there seems to be some interest maybe a quick poll, and if enough poeople prepay maybe one more run ? -----Original Message-----
From: j.guenther [mailto:j.guenther@...] Sent: Wednesday, November 13, 2002 9:23 AM To: CAD_CAM_EDM_DRO@... Subject: RE: [CAD_CAM_EDM_DRO] Re: DRO Boards Dam, I new I should have moved that up on my priority list. So much for smdromod and EMC on my setup! John Guenther 'Ye Olde Pen Maker' Sterling, Virginia -----Original Message----- motors and read the encoder positions like a dro. As I recall EMC will also do this. If you are running a stepper system using turbocnc and back and read the position from the DRO. Would it be possible to hook URL to this group:a sister site to the CCED group, as many of the same members are there, URL to this group: there, for OT subjects, that are not allowed on the CCED list. Addresses: FAQ: FILES: Post Messages: CAD_CAM_EDM_DRO@... Subscribe: CAD_CAM_EDM_DRO-subscribe@... Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@... List owner: CAD_CAM_EDM_DRO-owner@..., wanliker@... Moderator: jmelson@... timg@... [Moderator] URL to this group: OFF Topic POSTS: General Machining If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble. I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list. NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........ bill List Mom List Owner Your use of Yahoo! Groups is subject to |
|
I I can get commitments for 15 boards then I would go ahead and have a
toggle quoted message
Show quoted text
larger batch of boards made. Email your commitment off line Dan -----Original Message-----
From: aussiedude [mailto:aussiedude@...] Sent: Wednesday, November 13, 2002 9:23 AM To: CAD_CAM_EDM_DRO@... Subject: RE: [CAD_CAM_EDM_DRO] Re: DRO Boards Souns a bit like coke classic. Nobody missed it till its gone. So Dan, as there seems to be some interest maybe a quick poll, and if enough poeople prepay maybe one more run ? -----Original Message----- From: j.guenther [mailto:j.guenther@...] Sent: Wednesday, November 13, 2002 9:23 AM To: CAD_CAM_EDM_DRO@... Subject: RE: [CAD_CAM_EDM_DRO] Re: DRO Boards Dam, I new I should have moved that up on my priority list. So much for smdromod and EMC on my setup! John Guenther 'Ye Olde Pen Maker' Sterling, Virginia -----Original Message----- motors and read the encoder positions like a dro. As I recall EMC will also do this. If you are running a stepper system using turbocnc and back and read the position from the DRO. Would it be possible to hook URL to this group:a sister site to the CCED group, as many of the same members are there, URL to this group: there, for OT subjects, that are not allowed on the CCED list. Addresses: FAQ: FILES: Post Messages: CAD_CAM_EDM_DRO@... Subscribe: CAD_CAM_EDM_DRO-subscribe@... Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@... List owner: CAD_CAM_EDM_DRO-owner@..., wanliker@... Moderator: jmelson@... timg@... [Moderator] URL to this group: OFF Topic POSTS: General Machining If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble. I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list. NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........ bill List Mom List Owner Your use of Yahoo! Groups is subject to Addresses: FAQ: FILES: Post Messages: CAD_CAM_EDM_DRO@... Subscribe: CAD_CAM_EDM_DRO-subscribe@... Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@... List owner: CAD_CAM_EDM_DRO-owner@..., wanliker@... Moderator: jmelson@... timg@... [Moderator] URL to this group: OFF Topic POSTS: General Machining If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble. I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list. NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........ bill List Mom List Owner Your use of Yahoo! Groups is subject to |
|
Yes I probably will. I want to wait a few days to see if there is enough
toggle quoted message
Show quoted text
interest in me making a batch but so far it look bleak. If so I will locate the gerbers and email them to you next week. Dan -----Original Message-----
From: Tim Goldstein [mailto:timg@...] Sent: Wednesday, November 13, 2002 9:06 AM To: CAD_CAM_EDM_DRO@... Cc: dmauch@... Subject: Re: [CAD_CAM_EDM_DRO] Re: DRO Boards Dan, Would you be willing to make the board files available on an "open sources" basis? That way if someone wants one they can either have a board made as a prototype or use one of the programs like DeskPCB to make the G-code to route one out. If you are willing I would be happy to add it to the Kulaga DRO site I host. Tim [Denver CO] Sherline at Deep Discount www.KTMarketing.com/Sherline ----- Original Message ----- The DRO boards are all sold and like I said there wasn't enough sales motors and read the encoder positions like a dro. As I recall EMC will also do this. If you are running a stepper system using turbocnc and Addresses: FAQ: FILES: Post Messages: CAD_CAM_EDM_DRO@... Subscribe: CAD_CAM_EDM_DRO-subscribe@... Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@... List owner: CAD_CAM_EDM_DRO-owner@..., wanliker@... Moderator: jmelson@... timg@... [Moderator] URL to this group: OFF Topic POSTS: General Machining If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble. I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list. NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........ bill List Mom List Owner Your use of Yahoo! Groups is subject to |
to navigate to use esc to dismiss