¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. CAD-CAM-EDM-DRO
  2. Topics

VisualMill, which post for Mach1?

vrsculptor
 

I'm finaly too that point. Which post are you using or if a modified
one could you please mail me offline.

Roger
Peter
 

Roger,

You'll probably have to modify an existing post to suit your needs. I use the Flashcut post and have found that it is pretty generic and probably a pretty good starting point for Mach1. Once you select a post, at least you will be able to generate a G-Code file and then you can proof it to check for any anomolies within Mach1. Use the Post editor and save it to a new file name in the post folder and then make your changes. Of course, don't run the file with motor or spindle power on - until you have checked it very carefully then run the file with power on but cut air.

I have now received V4 but am still running V3.2 until I have time to install the new version - but looking at the new manual, it is pretty similar, just with several new and expanded features and probably some minor bug fixes.

Cheers, Peter

vrsculptor wrote:

I'm finaly too that point. Which post are you using or if a modified one could you please mail me offline.

Roger


Addresses: FAQ: FILES:
Post Messages: CAD_CAM_EDM_DRO@...
Subscribe: CAD_CAM_EDM_DRO-subscribe@... Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@... List owner: CAD_CAM_EDM_DRO-owner@..., wanliker@...
Moderator: jmelson@... timg@... [Moderator] URL to this group:

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.


I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner


Your use of Yahoo! Groups is subject to

1 - 2 of 2