开云体育

-----Original Message-----
From: Jonty50@... <Jonty50@...>
To: CAD_CAM_EDM_DRO@... <CAD_CAM_EDM_DRO@...>
Date: Thursday, May 20, 1999 9:22 AM
Subject: Re: [CAD_CAM_EDM_DRO] Still a little unclear

From: Jonty50@...

In a message dated 5/20/99 9:32:37 AM Eastern Daylight Time,
mfraser@... writes:

<<
Lurking; have a Sherline mill / atlas 6x24 and boxes of steppers,

ballnuts

/ screws,
hundreds of pounds of magazines, hundreds of megs of stored text, and a
penchant
for starting things that never quite get finished, including tidying up.

I think we're getting close to making the Sherline a CNC item, thanks to

the

group, which has filled in a LOT of gaps at the cost of only another meg

of

text
storage <grin>. So long as something else doesn't get my attention in the
meantime....

keep it up! / mark

>>

I could have written this one myself.. We sound very similar, Mark... My

wife

was compaining that I drag home everything but the kitchen sink, untill I
brought one of those home from a job a while back.. Haven't heard the end

of

that yet.. heh heh...

Jon Croad in Atlanta, GA

------------------------------------------------------------------------
Having difficulty getting "in synch" with list members?

Try ONElist's Shared Calendar to organize events, meetings and more!
------------------------------------------------------------------------
welcome to CAD_CAM_EDM_DRO@..., an unmodulated list for the

discussion of shop built systems in the above catagories.

-----Original Message-----
From: Gar Willis <garfield@...>
To: CAD_CAM_EDM_DRO@... <CAD_CAM_EDM_DRO@...>
Date: Friday, May 21, 1999 6:51 AM
Subject: Re: [CAD_CAM_EDM_DRO] Sherline

From: garfield@... (Gar Willis)

On Fri, 21 May 1999 06:14:24 -0700, "Dan Mauch" <dmauch@...> wrote:

I am writing an article for Nuts and Volts magazine on how to convert a
sherline mill to CNC . I'll send you a picture of it by email Iseperately.

I

will be coming out with a low cost hardware kit also. Much cheaper than
anything elese on the market.

Excellent, Dan; this will help MANY more people to get involved in the

*sport*.

Just what every beginner needs; an inexpensive object lesson to nail down

all

these pesky details and jargon terms.

Gar


------------------------------------------------------------------------
Looking for a new hobby? Want to make a new friend?

Come join one of the nearly 150,000 e-mail communities at ONElist!
------------------------------------------------------------------------
welcome to CAD_CAM_EDM_DRO@..., an unmodulated list for the

discussion of shop built systems in the above catagories.

-----Original Message-----
From: WAnliker@... <WAnliker@...>
To: CAD_CAM_EDM_DRO@... <CAD_CAM_EDM_DRO@...>
Date: Friday, May 21, 1999 11:25 AM
Subject: Re: [CAD_CAM_EDM_DRO] Sherline

From: WAnliker@...

In a message dated 5/21/99 6:51:42 AM Pacific Daylight Time,
garfield@... writes:

>I am writing an article for Nuts and Volts magazine on how to convert a
>sherline mill to CNC . I'll send you a picture of it by email

Iseperately.

I
>will be coming out with a low cost hardware kit also. Much cheaper than
>anything elese on the market.

How soon can I order one? Please send me a picture of it also.
thanks
Bill

------------------------------------------------------------------------
Looking for a new hobby? Want to make a new friend?

Come join one of the nearly 150,000 e-mail communities at ONElist!
------------------------------------------------------------------------
welcome to CAD_CAM_EDM_DRO@..., an unmodulated list for the

discussion of shop built systems in the above catagories.