开云体育

ctrl + shift + ? for shortcuts
© 2025 开云体育
  1. CAD-CAM-EDM-DRO
  2. Messages
Expanded Topics Messages Polls
Date
Re: Keyboard wiring?

John A. McFadden
 

Damn thats cool, thanks for the suggestion.

John

----- Original Message -----
From: "JJ" <jj5412@...>
To: <CAD_CAM_EDM_DRO@...>
Sent: Saturday, November 02, 2002 6:16 AM
Subject: RE: [CAD_CAM_EDM_DRO] Keyboard wiring?


Radio Shack has a flexible spill-proof keyboard (you can even roll it
up) for about $35.00. Mount it on a panel with double-sided tape and
you're set.

Regards,
JJ

Be Kind, Be Careful, Be Yourself
Re: Has anyone built an SPC display forDigimaticscales?

alex
 

Otherwise it will break on the edges of a spacer around the switch,
due to a flexing.
Alex

----- Original Message -----
From: Chris Baugher <cbaugher_yahoo@...>
To: <CAD_CAM_EDM_DRO@...>
Sent: Friday, November 01, 2002 9:00 PM
Subject: Re: [CAD_CAM_EDM_DRO] Re: Has anyone built an SPC display
forDigimaticscales?


On Fri, 1 Nov 2002, alex wrote:

Yes, that's what we did about 10 years ago.
The weekest spot is an overlay - has to be lexan.
Why lexan?

C|


Addresses:
FAQ:
FILES:
Post Messages: CAD_CAM_EDM_DRO@...

Subscribe: CAD_CAM_EDM_DRO-subscribe@...
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@...
List owner: CAD_CAM_EDM_DRO-owner@..., wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this group:

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.


I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner



Your use of Yahoo! Groups is subject to

Re: toolpath creation problem or wrong interpretor setup?

Alan Marconett KM6VV
 

Hi Tim, Jim,

Yeah, like the 7BA carbon steal tap (from England) I just broke! And I
was being nice to it! I'm milling the cylinder for a Stuart steam
engine. I decided to also mill a "practice" block (CNC comes in handy
for all those holes). It has "more conventional" threading. 5-40?
Right. I probably have a dozen each of the conventional 4-40, 6-32,
8-32 etc. taps, and I THOUGHT I had 5-40 taps and dies. Never found a
single one. Easy enough to pick up, but in a similar error, I also
THOUGHT I had a stockpile of 5-40 allen head cap screws. Oh well.

On the CNC, another thing that could get you in to trouble quick is
drawing the part in one orientation, and needing to have the "setup" in
another orientation. Also, having the drawing origin different then a
convenient point to "touch off" on the work piece.

Alan KM6VV


Tim Goldstein wrote:

<SNIP>
Welcome to the CNC club. It is the fastest way to destroying tooling that I
have ever experienced. In my case it is virtually always a case of idiot at
the switch. I have learned that if I can not buy 2 or 3 of the same cutter
to just not get it at all. Nothing like having a drawer full of spares to
keep you from breaking an end mill. Having only one of a size almost seems
to be an invitation to a learning experience.

Tim
[Denver, CO]
Polar Coordinate based CNC

 

What all would have to happen to allow a CNC machine to be based on a polar coordinate system rather than a rectangular one. The big benefit to me would be that the single most expensive component of a router/plama type of system is the slides and drive components (the screws or rack/pinon not the motor itself) for the longest axis (for systems of the size/type I have in mind this would be to move a gantry). But I assume that would mandate a change to the controller so it could interpret g-codes as polar coordinates. Are there any controller packages out there currently that support polar-coordinates?

Thanks,

Lee Wenger
Denver, CO
Re: Keyboard wiring?

 

I am using one of these and like it. It is mounted up at head height so
there are virtually no hot chips getting to it. It is a little funny to
type on and I would not want to use it on a system that I had to do a
lot of data entry, but on my CNC controller I am happy with it. I will
warn you that double sided tape does not work with it. The plastic is a
silicone and the tape just falls right off.

Tim
[Denver, CO]
Sherline products at Deep Discount
www.KTMarketing.com/Sherline

-----Original Message-----
Radio Shack has a flexible spill-proof keyboard (you can even roll it
up) for about $35.00. Mount it on a panel with double-sided
tape and you're set.

Regards,
JJ
Re: Drill press & cross-slide vice

turbulatordude
 

ditto !

I did that to my old, origional drill press.

I used brass screws with wingnuts to let me lock in the spindle.
I tried milling with a cross slide vice.

I was able to take cuts as deep as 0.005" in aluminum.

one problem revealed itself when wheil cranking, I rested my hand on
the top belt guard. the cutter took a nose dive into the part. I
didn't push, just rested, but the extra weight and the flex in the
machine changed the cutting depth.

I think i got the idea from this list or the 7x10minilathe list and
someone advised me how to remove the spring safely.

Dave





--- In CAD_CAM_EDM_DRO@y..., "JJ" <jj5412@e...> wrote:
Of you are intent on this approach you will find that cheap drill
presses not only have crappy bearings, but the spindle is not
stiff.

The rack and pinion gear that drives the spindle is very very
sloppy,
and there is no adjustment.
I pulled out my quill, drilled and tapped two 10-24 holes pointing
toward the quill, one from the front, one from the side. Inserted
two
brass screws with nuts to lock them down, and reduced the play
some. The
remaining slop comes from the quill spline fitting into the pulley
at
the top.

Regards,
JJ

Be Kind, Be Careful, Be Yourself
Re: Keyboard wiring?

stevenson_engineers
 

--- In CAD_CAM_EDM_DRO@y..., "JJ" <jj5412@e...> wrote:
Radio Shack has a flexible spill-proof keyboard (you can even roll
it
up) for about $35.00. Mount it on a panel with double-sided tape and
you're set.

Regards,
JJ
Steer clear of these keyboards. They are made of a very thin membrane
and just one hot chip can burn thru them.
Also they are very wobbly when typing. It's like trying to have sex
standing up on a water bed [ so Bill tells me <grin> ]
There are some photos in the photo section under pendant that you may
want to take a look at.

John S.

-----Original Message-----
From: John A. McFadden [mailto:mcfadden@c...]
Sent: Friday, November 01, 2002 3:14 PM
To: CAD_CAM_EDM_DRO@y...
Subject: [CAD_CAM_EDM_DRO] Keyboard wiring?


Does anyone have information on building a supplimental keyboard
for a
computer? I'm going to be using a DOS-based program for my
DRO readouts,
and would like to build a keypad with big buttons (like 1x1"
monster
buttons, probably will be membranes as well) for the most
important
functions (zero axis, change incremental/absolute mode, etc)
so that i dont
have to worry about hitting the wrong button or getting
cutting fluid or
chips in my laptop's keyboard and the keypad can be mounted
to the mill.

Thanks,
John


Addresses:
FAQ:
FILES:
Post Messages: CAD_CAM_EDM_DRO@y...

Subscribe: CAD_CAM_EDM_DRO-subscribe@y...
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@y...
List owner: CAD_CAM_EDM_DRO-owner@y..., wanliker@a...
Moderator: jmelson@a... timg@k...
[Moderator]
URL to this group:

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com
to reach it if you have trouble.

I consider this to
be a
sister site to the CCED group, as many of the same members are
there,
for OT subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING
THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner



Your use of Yahoo! Groups is subject to
Re: Keyboard wiring?

JJ
 

Radio Shack has a flexible spill-proof keyboard (you can even roll it
up) for about $35.00. Mount it on a panel with double-sided tape and
you're set.

Regards,
JJ

Be Kind, Be Careful, Be Yourself

-----Original Message-----
From: John A. McFadden [mailto:mcfadden@...]
Sent: Friday, November 01, 2002 3:14 PM
To: CAD_CAM_EDM_DRO@...
Subject: [CAD_CAM_EDM_DRO] Keyboard wiring?


Does anyone have information on building a supplimental keyboard for a
computer? I'm going to be using a DOS-based program for my
DRO readouts,
and would like to build a keypad with big buttons (like 1x1" monster
buttons, probably will be membranes as well) for the most important
functions (zero axis, change incremental/absolute mode, etc)
so that i dont
have to worry about hitting the wrong button or getting
cutting fluid or
chips in my laptop's keyboard and the keypad can be mounted
to the mill.

Thanks,
John


Addresses:
FAQ:
FILES:
Post Messages: CAD_CAM_EDM_DRO@...

Subscribe: CAD_CAM_EDM_DRO-subscribe@...
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@...
List owner: CAD_CAM_EDM_DRO-owner@..., wanliker@...
Moderator: jmelson@... timg@...
[Moderator]
URL to this group:

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com
to reach it if you have trouble.

I consider this to be a
sister site to the CCED group, as many of the same members are there,
for OT subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner



Your use of Yahoo! Groups is subject to
Re: NAMES, BDI, etc

Ray Henry
 

Proves once again that e-mail is quicker than snail mail between England
and Finland. Should be there and available soon.

Ray

? ?From: Ken Jenkins <kjenkins@...>
Subject: Re: NAMES, BDI, etc

Unless I missed something only 2.16 is there, not 2.18

?If you are so inclined, you can
?download and burn your own 2.18 from
?
?
?Ray
Re: toolpath creation problem or wrong interpretor setup?CODE SAMPLE INCLUDED

Jim Brown
 

Tim,
Thanks. Ill try that.

Regards,
Jim
Tim Goldstein <timg@...> wrote:When I view it in Discriminator or back plot it in Vector I see a cut at
depth being shown right at and after the G49 Z0 M5.

That is a cancel of a tool length offset and it is followed a couple of
lines down with a G43 tool length offset. My tempation would be to strip
out all the G41, G42, G43, and G49 and just run the tool paths from tool
centerline and see what happens. You have enough to deal with already
without needing to learn all about offsets and how they are implemented
on each controller.

Tim
[Denver, CO]

-----Original Message-----

Yeah, somehow the accel rate got misconfigured and I had to redo
motor tuning. Deceleration on the Y axis was a little lower than the
X and Y couldnt keep up.Hence the odd rapid Z safe move to the
second set of pocketed arcs.
But I still have a problem where it plunges into the
material.... This is about half of the code attached, and
approximately where it
plunges diagnally into the stock. It's FANUC. MACH1 seems to
like it (or then again, maybe thats the problem, as Surfcam
FREE only comes
with a few PP)
The feed rate is slowed way down so I could pinpoint(somewhat) where
the problem occurs.
I've initially rewound the code in MACH1 and zero'd all axiis, then
I jog to X0 Y0 Z1 and start the code from there. The code will run
correctly throughout, with exception to where it crashes at the end
of the portion of code that Ive included.If I let it run from this
crash point,all the rest of the toolpaths are executed as they
should be, but the "real time display" in MACH1 clearly shows the
tool travel to X0 Y0 Z0 diagnally through the stock ,and then back
up to safe Z(1), then it executes right from there.

Addresses:
FAQ:
FILES:
Post Messages: CAD_CAM_EDM_DRO@...

Subscribe: CAD_CAM_EDM_DRO-subscribe@...
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@...
List owner: CAD_CAM_EDM_DRO-owner@..., wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this group:

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto: aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if you have trouble.


I consider this to be a sister site to the CCED group, as many of the same members are there, for OT subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM. DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner



Your use of Yahoo! Groups is subject to




---------------------------------
Do you Yahoo!?
Y! Web Hosting - Let the expert host your web site
Re: toolpath creation problem or wrong interpretor setup?CODE SAMPLE INCLUDED

 

When I view it in Discriminator or back plot it in Vector I see a cut at
depth being shown right at and after the G49 Z0 M5.

That is a cancel of a tool length offset and it is followed a couple of
lines down with a G43 tool length offset. My tempation would be to strip
out all the G41, G42, G43, and G49 and just run the tool paths from tool
centerline and see what happens. You have enough to deal with already
without needing to learn all about offsets and how they are implemented
on each controller.

Tim
[Denver, CO]

-----Original Message-----

Yeah, somehow the accel rate got misconfigured and I had to redo
motor tuning. Deceleration on the Y axis was a little lower than the
X and Y couldnt keep up.Hence the odd rapid Z safe move to the
second set of pocketed arcs.
But I still have a problem where it plunges into the
material.... This is about half of the code attached, and
approximately where it
plunges diagnally into the stock. It's FANUC. MACH1 seems to
like it (or then again, maybe thats the problem, as Surfcam
FREE only comes
with a few PP)
The feed rate is slowed way down so I could pinpoint(somewhat) where
the problem occurs.
I've initially rewound the code in MACH1 and zero'd all axiis, then
I jog to X0 Y0 Z1 and start the code from there. The code will run
correctly throughout, with exception to where it crashes at the end
of the portion of code that Ive included.If I let it run from this
crash point,all the rest of the toolpaths are executed as they
should be, but the "real time display" in MACH1 clearly shows the
tool travel to X0 Y0 Z0 diagnally through the stock ,and then back
up to safe Z(1), then it executes right from there.
Re: toolpath creation problem or wrong interpretor setup?CODE SAMPLE INCLUDED

jagco1998
 

Yeah, somehow the accel rate got misconfigured and I had to redo
motor tuning. Deceleration on the Y axis was a little lower than the
X and Y couldnt keep up.Hence the odd rapid Z safe move to the
second set of pocketed arcs.
But I still have a problem where it plunges into the material....
This is about half of the code attached, and approximately where it
plunges diagnally into the stock. It's FANUC. MACH1 seems to like it
(or then again, maybe thats the problem, as Surfcam FREE only comes
with a few PP)
The feed rate is slowed way down so I could pinpoint(somewhat) where
the problem occurs.
I've initially rewound the code in MACH1 and zero'd all axiis, then
I jog to X0 Y0 Z1 and start the code from there. The code will run
correctly throughout, with exception to where it crashes at the end
of the portion of code that Ive included.If I let it run from this
crash point,all the rest of the toolpaths are executed as they
should be, but the "real time display" in MACH1 clearly shows the
tool travel to X0 Y0 Z0 diagnally through the stock ,and then back
up to safe Z(1), then it executes right from there.

CODE

%
O0
(Surfware, Inc.)
(5703 Corsa Ave)
(Westlake, Ca. 91362)
G17 G40 G80 G90
T1 M6
M3 S2500
G00 G54 X1.001 Y0
G43 Z1. H0
M9
G00 Z0.72
G01 Z0.57 F2.0
G03 X0.948 Y0.053 I-0.053 J0 F4.0
X0.895 Y0 I0 J-0.053
X0.948 Y-0.053 I0.053 J0
X1.001 Y0 I0 J0.053
G01 X1.061
G03 X0.948 Y0.113 I-0.113 J0
X0.835 Y0 I0 J-0.113
X0.948 Y-0.113 I0.113 J0
X1.061 Y0 I0 J0.113
G01 X1.121
G03 X0.948 Y0.173 I-0.173 J0
X0.775 Y0 I0 J-0.173
X0.948 Y-0.173 I0.173 J0
X1.121 Y0 I0 J0.173
G01 X1.181
G03 X0.948 Y0.233 I-0.233 J0
X0.715 Y0 I0 J-0.233
X0.948 Y-0.233 I0.233 J0
X1.181 Y0 I0 J0.233
G01 X1.1825
G03 X0.948 Y0.2345 I-0.2345 J0
X0.7135 Y0 I0 J-0.2345
X0.948 Y-0.2345 I0.2345 J0
X1.1825 Y0 I0 J0.2345
G01 X1.184
G03 X0.948 Y0.236 I-0.236 J0
X0.712 Y0 I0 J-0.236
X0.948 Y-0.236 I0.236 J0
X1.184 Y0 I0 J0.236
G01 X1.001
Z0.52 F2.0
G03 X0.948 Y0.053 I-0.053 J0 F4.0
X0.895 Y0 I0 J-0.053
X0.948 Y-0.053 I0.053 J0
X1.001 Y0 I0 J0.053
G01 X1.061
G03 X0.948 Y0.113 I-0.113 J0
X0.835 Y0 I0 J-0.113
X0.948 Y-0.113 I0.113 J0
X1.061 Y0 I0 J0.113
G01 X1.121
G03 X0.948 Y0.173 I-0.173 J0
X0.775 Y0 I0 J-0.173
X0.948 Y-0.173 I0.173 J0
X1.121 Y0 I0 J0.173
G01 X1.181
G03 X0.948 Y0.233 I-0.233 J0
X0.715 Y0 I0 J-0.233
X0.948 Y-0.233 I0.233 J0
X1.181 Y0 I0 J0.233
G01 X1.1825
G03 X0.948 Y0.2345 I-0.2345 J0
X0.7135 Y0 I0 J-0.2345
X0.948 Y-0.2345 I0.2345 J0
X1.1825 Y0 I0 J0.2345
G01 X1.184
G03 X0.948 Y0.236 I-0.236 J0
X0.712 Y0 I0 J-0.236
X0.948 Y-0.236 I0.236 J0
X1.184 Y0 I0 J0.236
G01 X1.001
Z0.47 F2.0
G03 X0.948 Y0.053 I-0.053 J0 F4.0
X0.895 Y0 I0 J-0.053
X0.948 Y-0.053 I0.053 J0
X1.001 Y0 I0 J0.053
G01 X1.061
G03 X0.948 Y0.113 I-0.113 J0
X0.835 Y0 I0 J-0.113
X0.948 Y-0.113 I0.113 J0
X1.061 Y0 I0 J0.113
G01 X1.121
G03 X0.948 Y0.173 I-0.173 J0
X0.775 Y0 I0 J-0.173
X0.948 Y-0.173 I0.173 J0
X1.121 Y0 I0 J0.173
G01 X1.181
G03 X0.948 Y0.233 I-0.233 J0
X0.715 Y0 I0 J-0.233
X0.948 Y-0.233 I0.233 J0
X1.181 Y0 I0 J0.233
G01 X1.1825
G03 X0.948 Y0.2345 I-0.2345 J0
X0.7135 Y0 I0 J-0.2345
X0.948 Y-0.2345 I0.2345 J0
X1.1825 Y0 I0 J0.2345
G01 X1.184
G03 X0.948 Y0.236 I-0.236 J0
X0.712 Y0 I0 J-0.236
X0.948 Y-0.236 I0.236 J0
X1.184 Y0 I0 J0.236
G01 X1.001
Z0.42 F2.0
G03 X0.948 Y0.053 I-0.053 J0 F4.0
X0.895 Y0 I0 J-0.053
X0.948 Y-0.053 I0.053 J0
X1.001 Y0 I0 J0.053
G01 X1.061
G03 X0.948 Y0.113 I-0.113 J0
X0.835 Y0 I0 J-0.113
X0.948 Y-0.113 I0.113 J0
X1.061 Y0 I0 J0.113
G01 X1.121
G03 X0.948 Y0.173 I-0.173 J0
X0.775 Y0 I0 J-0.173
X0.948 Y-0.173 I0.173 J0
X1.121 Y0 I0 J0.173
G01 X1.181
G03 X0.948 Y0.233 I-0.233 J0
X0.715 Y0 I0 J-0.233
X0.948 Y-0.233 I0.233 J0
X1.181 Y0 I0 J0.233
G01 X1.1825
G03 X0.948 Y0.2345 I-0.2345 J0
X0.7135 Y0 I0 J-0.2345
X0.948 Y-0.2345 I0.2345 J0
X1.1825 Y0 I0 J0.2345
G01 X1.184
G03 X0.948 Y0.236 I-0.236 J0
X0.712 Y0 I0 J-0.236
X0.948 Y-0.236 I0.236 J0
X1.184 Y0 I0 J0.236
G01 X1.001
Z0.37 F2.0
G03 X0.948 Y0.053 I-0.053 J0 F4.0
X0.895 Y0 I0 J-0.053
X0.948 Y-0.053 I0.053 J0
X1.001 Y0 I0 J0.053
G01 X1.061
G03 X0.948 Y0.113 I-0.113 J0
X0.835 Y0 I0 J-0.113
X0.948 Y-0.113 I0.113 J0
X1.061 Y0 I0 J0.113
G01 X1.121
G03 X0.948 Y0.173 I-0.173 J0
X0.775 Y0 I0 J-0.173
X0.948 Y-0.173 I0.173 J0
X1.121 Y0 I0 J0.173
G01 X1.181
G03 X0.948 Y0.233 I-0.233 J0
X0.715 Y0 I0 J-0.233
X0.948 Y-0.233 I0.233 J0
X1.181 Y0 I0 J0.233
G01 X1.1825
G03 X0.948 Y0.2345 I-0.2345 J0
X0.7135 Y0 I0 J-0.2345
X0.948 Y-0.2345 I0.2345 J0
X1.1825 Y0 I0 J0.2345
G01 X1.184
G03 X0.948 Y0.236 I-0.236 J0
X0.712 Y0 I0 J-0.236
X0.948 Y-0.236 I0.236 J0
X1.184 Y0 I0 J0.236
G01 X1.001
Z0.32 F2.0
G03 X0.948 Y0.053 I-0.053 J0 F4.0
X0.895 Y0 I0 J-0.053
X0.948 Y-0.053 I0.053 J0
X1.001 Y0 I0 J0.053
G01 X1.061
G03 X0.948 Y0.113 I-0.113 J0
X0.835 Y0 I0 J-0.113
X0.948 Y-0.113 I0.113 J0
X1.061 Y0 I0 J0.113
G01 X1.121
G03 X0.948 Y0.173 I-0.173 J0
X0.775 Y0 I0 J-0.173
X0.948 Y-0.173 I0.173 J0
X1.121 Y0 I0 J0.173
G01 X1.181
G03 X0.948 Y0.233 I-0.233 J0
X0.715 Y0 I0 J-0.233
X0.948 Y-0.233 I0.233 J0
X1.181 Y0 I0 J0.233
G01 X1.1825
G03 X0.948 Y0.2345 I-0.2345 J0
X0.7135 Y0 I0 J-0.2345
X0.948 Y-0.2345 I0.2345 J0
X1.1825 Y0 I0 J0.2345
G01 X1.184
G03 X0.948 Y0.236 I-0.236 J0
X0.712 Y0 I0 J-0.236
X0.948 Y-0.236 I0.236 J0
X1.184 Y0 I0 J0.236
G01 X1.001
Z0.27 F2.0
G03 X0.948 Y0.053 I-0.053 J0 F4.0
X0.895 Y0 I0 J-0.053
X0.948 Y-0.053 I0.053 J0
X1.001 Y0 I0 J0.053
G01 X1.061
G03 X0.948 Y0.113 I-0.113 J0
X0.835 Y0 I0 J-0.113
X0.948 Y-0.113 I0.113 J0
X1.061 Y0 I0 J0.113
G01 X1.121
G03 X0.948 Y0.173 I-0.173 J0
X0.775 Y0 I0 J-0.173
X0.948 Y-0.173 I0.173 J0
X1.121 Y0 I0 J0.173
G01 X1.181
G03 X0.948 Y0.233 I-0.233 J0
X0.715 Y0 I0 J-0.233
X0.948 Y-0.233 I0.233 J0
X1.181 Y0 I0 J0.233
G01 X1.1825
G03 X0.948 Y0.2345 I-0.2345 J0
X0.7135 Y0 I0 J-0.2345
X0.948 Y-0.2345 I0.2345 J0
X1.1825 Y0 I0 J0.2345
G01 X1.184
G03 X0.948 Y0.236 I-0.236 J0
X0.712 Y0 I0 J-0.236
X0.948 Y-0.236 I0.236 J0
X1.184 Y0 I0 J0.236
G01 X1.001
Z0.22 F2.0
G03 X0.948 Y0.053 I-0.053 J0 F4.0
X0.895 Y0 I0 J-0.053
X0.948 Y-0.053 I0.053 J0
X1.001 Y0 I0 J0.053
G01 X1.061
G03 X0.948 Y0.113 I-0.113 J0
X0.835 Y0 I0 J-0.113
X0.948 Y-0.113 I0.113 J0
X1.061 Y0 I0 J0.113
G01 X1.121
G03 X0.948 Y0.173 I-0.173 J0
X0.775 Y0 I0 J-0.173
X0.948 Y-0.173 I0.173 J0
X1.121 Y0 I0 J0.173
G01 X1.181
G03 X0.948 Y0.233 I-0.233 J0
X0.715 Y0 I0 J-0.233
X0.948 Y-0.233 I0.233 J0
X1.181 Y0 I0 J0.233
G01 X1.1825
G03 X0.948 Y0.2345 I-0.2345 J0
X0.7135 Y0 I0 J-0.2345
X0.948 Y-0.2345 I0.2345 J0
X1.1825 Y0 I0 J0.2345
G01 X1.184
G03 X0.948 Y0.236 I-0.236 J0
X0.712 Y0 I0 J-0.236
X0.948 Y-0.236 I0.236 J0
X1.184 Y0 I0 J0.236
G01 X1.001
Z0.195 F2.0
G03 X0.948 Y0.053 I-0.053 J0 F4.0
X0.895 Y0 I0 J-0.053
X0.948 Y-0.053 I0.053 J0
X1.001 Y0 I0 J0.053
G01 X1.061
G03 X0.948 Y0.113 I-0.113 J0
X0.835 Y0 I0 J-0.113
X0.948 Y-0.113 I0.113 J0
X1.061 Y0 I0 J0.113
G01 X1.121
G03 X0.948 Y0.173 I-0.173 J0
X0.775 Y0 I0 J-0.173
X0.948 Y-0.173 I0.173 J0
X1.121 Y0 I0 J0.173
G01 X1.181
G03 X0.948 Y0.233 I-0.233 J0
X0.715 Y0 I0 J-0.233
X0.948 Y-0.233 I0.233 J0
X1.181 Y0 I0 J0.233
G01 X1.1825
G03 X0.948 Y0.2345 I-0.2345 J0
X0.7135 Y0 I0 J-0.2345
X0.948 Y-0.2345 I0.2345 J0
X1.1825 Y0 I0 J0.2345
G01 X1.184
G03 X0.948 Y0.236 I-0.236 J0
X0.712 Y0 I0 J-0.236
X0.948 Y-0.236 I0.236 J0
X1.184 Y0 I0 J0.236
G01 X1.001
Z0.19 F2.0
G03 X0.948 Y0.053 I-0.053 J0 F4.0
X0.895 Y0 I0 J-0.053
X0.948 Y-0.053 I0.053 J0
X1.001 Y0 I0 J0.053
G01 X1.061
G03 X0.948 Y0.113 I-0.113 J0
X0.835 Y0 I0 J-0.113
X0.948 Y-0.113 I0.113 J0
X1.061 Y0 I0 J0.113
G01 X1.121
G03 X0.948 Y0.173 I-0.173 J0
X0.775 Y0 I0 J-0.173
X0.948 Y-0.173 I0.173 J0
X1.121 Y0 I0 J0.173
G01 X1.181
G03 X0.948 Y0.233 I-0.233 J0
X0.715 Y0 I0 J-0.233
X0.948 Y-0.233 I0.233 J0
X1.181 Y0 I0 J0.233
G01 X1.1825
G03 X0.948 Y0.2345 I-0.2345 J0
X0.7135 Y0 I0 J-0.2345
X0.948 Y-0.2345 I0.2345 J0
X1.1825 Y0 I0 J0.2345
G01 X1.184
G03 X0.948 Y0.236 I-0.236 J0
X0.712 Y0 I0 J-0.236
X0.948 Y-0.236 I0.236 J0
X1.184 Y0 I0 J0.236
G01 X1.001
Z0.185 F2.0
G03 X0.948 Y0.053 I-0.053 J0 F4.0
X0.895 Y0 I0 J-0.053
X0.948 Y-0.053 I0.053 J0
X1.001 Y0 I0 J0.053
G01 X1.061
G03 X0.948 Y0.113 I-0.113 J0
X0.835 Y0 I0 J-0.113
X0.948 Y-0.113 I0.113 J0
X1.061 Y0 I0 J0.113
G01 X1.121
G03 X0.948 Y0.173 I-0.173 J0
X0.775 Y0 I0 J-0.173
X0.948 Y-0.173 I0.173 J0
X1.121 Y0 I0 J0.173
G01 X1.181
G03 X0.948 Y0.233 I-0.233 J0
X0.715 Y0 I0 J-0.233
X0.948 Y-0.233 I0.233 J0
X1.181 Y0 I0 J0.233
G01 X1.1825
G03 X0.948 Y0.2345 I-0.2345 J0
X0.7135 Y0 I0 J-0.2345
X0.948 Y-0.2345 I0.2345 J0
X1.1825 Y0 I0 J0.2345
G01 X1.184
G03 X0.948 Y0.236 I-0.236 J0
X0.712 Y0 I0 J-0.236
X0.948 Y-0.236 I0.236 J0
X1.184 Y0 I0 J0.236
G01 X1.001
Z0.18 F2.0
G03 X0.948 Y0.053 I-0.053 J0 F4.0
X0.895 Y0 I0 J-0.053
X0.948 Y-0.053 I0.053 J0
X1.001 Y0 I0 J0.053
G01 X1.061
G03 X0.948 Y0.113 I-0.113 J0
X0.835 Y0 I0 J-0.113
X0.948 Y-0.113 I0.113 J0
X1.061 Y0 I0 J0.113
G01 X1.121
G03 X0.948 Y0.173 I-0.173 J0
X0.775 Y0 I0 J-0.173
X0.948 Y-0.173 I0.173 J0
X1.121 Y0 I0 J0.173
G01 X1.181
G03 X0.948 Y0.233 I-0.233 J0
X0.715 Y0 I0 J-0.233
X0.948 Y-0.233 I0.233 J0
X1.181 Y0 I0 J0.233
G01 X1.1825
G03 X0.948 Y0.2345 I-0.2345 J0
X0.7135 Y0 I0 J-0.2345
X0.948 Y-0.2345 I0.2345 J0
X1.1825 Y0 I0 J0.2345
G01 X1.184
G03 X0.948 Y0.236 I-0.236 J0
X0.712 Y0 I0 J-0.236
X0.948 Y-0.236 I0.236 J0
X1.184 Y0 I0 J0.236
G01 X1.1855
G03 X0.948 Y0.2375 I-0.2375 J0
X0.7105 Y0 I0 J-0.2375
X0.948 Y-0.2375 I0.2375 J0
X1.1855 Y0 I0 J0.2375
G00 Z1.
X-0.8953
Z0.72
G01 Z0.57 F2.0
G03 X-0.9483 Y0.053 I-0.053 J0 F4.0
X-1.0013 Y0 I0 J-0.053
X-0.9483 Y-0.053 I0.053 J0
X-0.8953 Y0 I0 J0.053
G01 X-0.8353
G03 X-0.9483 Y0.113 I-0.113 J0
X-1.0613 Y0 I0 J-0.113
X-0.9483 Y-0.113 I0.113 J0
X-0.8353 Y0 I0 J0.113
G01 X-0.7753
G03 X-0.9483 Y0.173 I-0.173 J0
X-1.1213 Y0 I0 J-0.173
X-0.9483 Y-0.173 I0.173 J0
X-0.7753 Y0 I0 J0.173
G01 X-0.7153
G03 X-0.9483 Y0.233 I-0.233 J0
X-1.1813 Y0 I0 J-0.233
X-0.9483 Y-0.233 I0.233 J0
X-0.7153 Y0 I0 J0.233
G01 X-0.7138
G03 X-0.9483 Y0.2345 I-0.2345 J0
X-1.1828 Y0 I0 J-0.2345
X-0.9483 Y-0.2345 I0.2345 J0
X-0.7138 Y0 I0 J0.2345
G01 X-0.7123
G03 X-0.9483 Y0.236 I-0.236 J0
X-1.1843 Y0 I0 J-0.236
X-0.9483 Y-0.236 I0.236 J0
X-0.7123 Y0 I0 J0.236
G01 X-0.8953
Z0.52 F2.0
G03 X-0.9483 Y0.053 I-0.053 J0 F4.0
X-1.0013 Y0 I0 J-0.053
X-0.9483 Y-0.053 I0.053 J0
X-0.8953 Y0 I0 J0.053
G01 X-0.8353
G03 X-0.9483 Y0.113 I-0.113 J0
X-1.0613 Y0 I0 J-0.113
X-0.9483 Y-0.113 I0.113 J0
X-0.8353 Y0 I0 J0.113
G01 X-0.7753
G03 X-0.9483 Y0.173 I-0.173 J0
X-1.1213 Y0 I0 J-0.173
X-0.9483 Y-0.173 I0.173 J0
X-0.7753 Y0 I0 J0.173
G01 X-0.7153
G03 X-0.9483 Y0.233 I-0.233 J0
X-1.1813 Y0 I0 J-0.233
X-0.9483 Y-0.233 I0.233 J0
X-0.7153 Y0 I0 J0.233
G01 X-0.7138
G03 X-0.9483 Y0.2345 I-0.2345 J0
X-1.1828 Y0 I0 J-0.2345
X-0.9483 Y-0.2345 I0.2345 J0
X-0.7138 Y0 I0 J0.2345
G01 X-0.7123
G03 X-0.9483 Y0.236 I-0.236 J0
X-1.1843 Y0 I0 J-0.236
X-0.9483 Y-0.236 I0.236 J0
X-0.7123 Y0 I0 J0.236
G01 X-0.8953
Z0.47 F2.0
G03 X-0.9483 Y0.053 I-0.053 J0 F4.0
X-1.0013 Y0 I0 J-0.053
X-0.9483 Y-0.053 I0.053 J0
X-0.8953 Y0 I0 J0.053
G01 X-0.8353
G03 X-0.9483 Y0.113 I-0.113 J0
X-1.0613 Y0 I0 J-0.113
X-0.9483 Y-0.113 I0.113 J0
X-0.8353 Y0 I0 J0.113
G01 X-0.7753
G03 X-0.9483 Y0.173 I-0.173 J0
X-1.1213 Y0 I0 J-0.173
X-0.9483 Y-0.173 I0.173 J0
X-0.7753 Y0 I0 J0.173
G01 X-0.7153
G03 X-0.9483 Y0.233 I-0.233 J0
X-1.1813 Y0 I0 J-0.233
X-0.9483 Y-0.233 I0.233 J0
X-0.7153 Y0 I0 J0.233
G01 X-0.7138
G03 X-0.9483 Y0.2345 I-0.2345 J0
X-1.1828 Y0 I0 J-0.2345
X-0.9483 Y-0.2345 I0.2345 J0
X-0.7138 Y0 I0 J0.2345
G01 X-0.7123
G03 X-0.9483 Y0.236 I-0.236 J0
X-1.1843 Y0 I0 J-0.236
X-0.9483 Y-0.236 I0.236 J0
X-0.7123 Y0 I0 J0.236
G01 X-0.8953
Z0.42 F2.0
G03 X-0.9483 Y0.053 I-0.053 J0 F4.0
X-1.0013 Y0 I0 J-0.053
X-0.9483 Y-0.053 I0.053 J0
X-0.8953 Y0 I0 J0.053
G01 X-0.8353
G03 X-0.9483 Y0.113 I-0.113 J0
X-1.0613 Y0 I0 J-0.113
X-0.9483 Y-0.113 I0.113 J0
X-0.8353 Y0 I0 J0.113
G01 X-0.7753
G03 X-0.9483 Y0.173 I-0.173 J0
X-1.1213 Y0 I0 J-0.173
X-0.9483 Y-0.173 I0.173 J0
X-0.7753 Y0 I0 J0.173
G01 X-0.7153
G03 X-0.9483 Y0.233 I-0.233 J0
X-1.1813 Y0 I0 J-0.233
X-0.9483 Y-0.233 I0.233 J0
X-0.7153 Y0 I0 J0.233
G01 X-0.7138
G03 X-0.9483 Y0.2345 I-0.2345 J0
X-1.1828 Y0 I0 J-0.2345
X-0.9483 Y-0.2345 I0.2345 J0
X-0.7138 Y0 I0 J0.2345
G01 X-0.7123
G03 X-0.9483 Y0.236 I-0.236 J0
X-1.1843 Y0 I0 J-0.236
X-0.9483 Y-0.236 I0.236 J0
X-0.7123 Y0 I0 J0.236
G01 X-0.8953
Z0.37 F2.0
G03 X-0.9483 Y0.053 I-0.053 J0 F4.0
X-1.0013 Y0 I0 J-0.053
X-0.9483 Y-0.053 I0.053 J0
X-0.8953 Y0 I0 J0.053
G01 X-0.8353
G03 X-0.9483 Y0.113 I-0.113 J0
X-1.0613 Y0 I0 J-0.113
X-0.9483 Y-0.113 I0.113 J0
X-0.8353 Y0 I0 J0.113
G01 X-0.7753
G03 X-0.9483 Y0.173 I-0.173 J0
X-1.1213 Y0 I0 J-0.173
X-0.9483 Y-0.173 I0.173 J0
X-0.7753 Y0 I0 J0.173
G01 X-0.7153
G03 X-0.9483 Y0.233 I-0.233 J0
X-1.1813 Y0 I0 J-0.233
X-0.9483 Y-0.233 I0.233 J0
X-0.7153 Y0 I0 J0.233
G01 X-0.7138
G03 X-0.9483 Y0.2345 I-0.2345 J0
X-1.1828 Y0 I0 J-0.2345
X-0.9483 Y-0.2345 I0.2345 J0
X-0.7138 Y0 I0 J0.2345
G01 X-0.7123
G03 X-0.9483 Y0.236 I-0.236 J0
X-1.1843 Y0 I0 J-0.236
X-0.9483 Y-0.236 I0.236 J0
X-0.7123 Y0 I0 J0.236
G01 X-0.8953
Z0.32 F2.0
G03 X-0.9483 Y0.053 I-0.053 J0 F4.0
X-1.0013 Y0 I0 J-0.053
X-0.9483 Y-0.053 I0.053 J0
X-0.8953 Y0 I0 J0.053
G01 X-0.8353
G03 X-0.9483 Y0.113 I-0.113 J0
X-1.0613 Y0 I0 J-0.113
X-0.9483 Y-0.113 I0.113 J0
X-0.8353 Y0 I0 J0.113
G01 X-0.7753
G03 X-0.9483 Y0.173 I-0.173 J0
X-1.1213 Y0 I0 J-0.173
X-0.9483 Y-0.173 I0.173 J0
X-0.7753 Y0 I0 J0.173
G01 X-0.7153
G03 X-0.9483 Y0.233 I-0.233 J0
X-1.1813 Y0 I0 J-0.233
X-0.9483 Y-0.233 I0.233 J0
X-0.7153 Y0 I0 J0.233
G01 X-0.7138
G03 X-0.9483 Y0.2345 I-0.2345 J0
X-1.1828 Y0 I0 J-0.2345
X-0.9483 Y-0.2345 I0.2345 J0
X-0.7138 Y0 I0 J0.2345
G01 X-0.7123
G03 X-0.9483 Y0.236 I-0.236 J0
X-1.1843 Y0 I0 J-0.236
X-0.9483 Y-0.236 I0.236 J0
X-0.7123 Y0 I0 J0.236
G01 X-0.8953
Z0.27 F2.0
G03 X-0.9483 Y0.053 I-0.053 J0 F4.0
X-1.0013 Y0 I0 J-0.053
X-0.9483 Y-0.053 I0.053 J0
X-0.8953 Y0 I0 J0.053
G01 X-0.8353
G03 X-0.9483 Y0.113 I-0.113 J0
X-1.0613 Y0 I0 J-0.113
X-0.9483 Y-0.113 I0.113 J0
X-0.8353 Y0 I0 J0.113
G01 X-0.7753
G03 X-0.9483 Y0.173 I-0.173 J0
X-1.1213 Y0 I0 J-0.173
X-0.9483 Y-0.173 I0.173 J0
X-0.7753 Y0 I0 J0.173
G01 X-0.7153
G03 X-0.9483 Y0.233 I-0.233 J0
X-1.1813 Y0 I0 J-0.233
X-0.9483 Y-0.233 I0.233 J0
X-0.7153 Y0 I0 J0.233
G01 X-0.7138
G03 X-0.9483 Y0.2345 I-0.2345 J0
X-1.1828 Y0 I0 J-0.2345
X-0.9483 Y-0.2345 I0.2345 J0
X-0.7138 Y0 I0 J0.2345
G01 X-0.7123
G03 X-0.9483 Y0.236 I-0.236 J0
X-1.1843 Y0 I0 J-0.236
X-0.9483 Y-0.236 I0.236 J0
X-0.7123 Y0 I0 J0.236
G01 X-0.8953
Z0.22 F2.0
G03 X-0.9483 Y0.053 I-0.053 J0 F4.0
X-1.0013 Y0 I0 J-0.053
X-0.9483 Y-0.053 I0.053 J0
X-0.8953 Y0 I0 J0.053
G01 X-0.8353
G03 X-0.9483 Y0.113 I-0.113 J0
X-1.0613 Y0 I0 J-0.113
X-0.9483 Y-0.113 I0.113 J0
X-0.8353 Y0 I0 J0.113
G01 X-0.7753
G03 X-0.9483 Y0.173 I-0.173 J0
X-1.1213 Y0 I0 J-0.173
X-0.9483 Y-0.173 I0.173 J0
X-0.7753 Y0 I0 J0.173
G01 X-0.7153
G03 X-0.9483 Y0.233 I-0.233 J0
X-1.1813 Y0 I0 J-0.233
X-0.9483 Y-0.233 I0.233 J0
X-0.7153 Y0 I0 J0.233
G01 X-0.7138
G03 X-0.9483 Y0.2345 I-0.2345 J0
X-1.1828 Y0 I0 J-0.2345
X-0.9483 Y-0.2345 I0.2345 J0
X-0.7138 Y0 I0 J0.2345
G01 X-0.7123
G03 X-0.9483 Y0.236 I-0.236 J0
X-1.1843 Y0 I0 J-0.236
X-0.9483 Y-0.236 I0.236 J0
X-0.7123 Y0 I0 J0.236
G01 X-0.8953
Z0.195 F2.0
G03 X-0.9483 Y0.053 I-0.053 J0 F4.0
X-1.0013 Y0 I0 J-0.053
X-0.9483 Y-0.053 I0.053 J0
X-0.8953 Y0 I0 J0.053
G01 X-0.8353
G03 X-0.9483 Y0.113 I-0.113 J0
X-1.0613 Y0 I0 J-0.113
X-0.9483 Y-0.113 I0.113 J0
X-0.8353 Y0 I0 J0.113
G01 X-0.7753
G03 X-0.9483 Y0.173 I-0.173 J0
X-1.1213 Y0 I0 J-0.173
X-0.9483 Y-0.173 I0.173 J0
X-0.7753 Y0 I0 J0.173
G01 X-0.7153
G03 X-0.9483 Y0.233 I-0.233 J0
X-1.1813 Y0 I0 J-0.233
X-0.9483 Y-0.233 I0.233 J0
X-0.7153 Y0 I0 J0.233
G01 X-0.7138
G03 X-0.9483 Y0.2345 I-0.2345 J0
X-1.1828 Y0 I0 J-0.2345
X-0.9483 Y-0.2345 I0.2345 J0
X-0.7138 Y0 I0 J0.2345
G01 X-0.7123
G03 X-0.9483 Y0.236 I-0.236 J0
X-1.1843 Y0 I0 J-0.236
X-0.9483 Y-0.236 I0.236 J0
X-0.7123 Y0 I0 J0.236
G01 X-0.8953
Z0.19 F2.0
G03 X-0.9483 Y0.053 I-0.053 J0 F4.0
X-1.0013 Y0 I0 J-0.053
X-0.9483 Y-0.053 I0.053 J0
X-0.8953 Y0 I0 J0.053
G01 X-0.8353
G03 X-0.9483 Y0.113 I-0.113 J0
X-1.0613 Y0 I0 J-0.113
X-0.9483 Y-0.113 I0.113 J0
X-0.8353 Y0 I0 J0.113
G01 X-0.7753
G03 X-0.9483 Y0.173 I-0.173 J0
X-1.1213 Y0 I0 J-0.173
X-0.9483 Y-0.173 I0.173 J0
X-0.7753 Y0 I0 J0.173
G01 X-0.7153
G03 X-0.9483 Y0.233 I-0.233 J0
X-1.1813 Y0 I0 J-0.233
X-0.9483 Y-0.233 I0.233 J0
X-0.7153 Y0 I0 J0.233
G01 X-0.7138
G03 X-0.9483 Y0.2345 I-0.2345 J0
X-1.1828 Y0 I0 J-0.2345
X-0.9483 Y-0.2345 I0.2345 J0
X-0.7138 Y0 I0 J0.2345
G01 X-0.7123
G03 X-0.9483 Y0.236 I-0.236 J0
X-1.1843 Y0 I0 J-0.236
X-0.9483 Y-0.236 I0.236 J0
X-0.7123 Y0 I0 J0.236
G01 X-0.8953
Z0.185 F2.0
G03 X-0.9483 Y0.053 I-0.053 J0 F4.0
X-1.0013 Y0 I0 J-0.053
X-0.9483 Y-0.053 I0.053 J0
X-0.8953 Y0 I0 J0.053
G01 X-0.8353
G03 X-0.9483 Y0.113 I-0.113 J0
X-1.0613 Y0 I0 J-0.113
X-0.9483 Y-0.113 I0.113 J0
X-0.8353 Y0 I0 J0.113
G01 X-0.7753
G03 X-0.9483 Y0.173 I-0.173 J0
X-1.1213 Y0 I0 J-0.173
X-0.9483 Y-0.173 I0.173 J0
X-0.7753 Y0 I0 J0.173
G01 X-0.7153
G03 X-0.9483 Y0.233 I-0.233 J0
X-1.1813 Y0 I0 J-0.233
X-0.9483 Y-0.233 I0.233 J0
X-0.7153 Y0 I0 J0.233
G01 X-0.7138
G03 X-0.9483 Y0.2345 I-0.2345 J0
X-1.1828 Y0 I0 J-0.2345
X-0.9483 Y-0.2345 I0.2345 J0
X-0.7138 Y0 I0 J0.2345
G01 X-0.7123
G03 X-0.9483 Y0.236 I-0.236 J0
X-1.1843 Y0 I0 J-0.236
X-0.9483 Y-0.236 I0.236 J0
X-0.7123 Y0 I0 J0.236
G01 X-0.8953
Z0.18 F2.0
G03 X-0.9483 Y0.053 I-0.053 J0 F4.0
X-1.0013 Y0 I0 J-0.053
X-0.9483 Y-0.053 I0.053 J0
X-0.8953 Y0 I0 J0.053
G01 X-0.8353
G03 X-0.9483 Y0.113 I-0.113 J0
X-1.0613 Y0 I0 J-0.113
X-0.9483 Y-0.113 I0.113 J0
X-0.8353 Y0 I0 J0.113
G01 X-0.7753
G03 X-0.9483 Y0.173 I-0.173 J0
X-1.1213 Y0 I0 J-0.173
X-0.9483 Y-0.173 I0.173 J0
X-0.7753 Y0 I0 J0.173
G01 X-0.7153
G03 X-0.9483 Y0.233 I-0.233 J0
X-1.1813 Y0 I0 J-0.233
X-0.9483 Y-0.233 I0.233 J0
X-0.7153 Y0 I0 J0.233
G01 X-0.7138
G03 X-0.9483 Y0.2345 I-0.2345 J0
X-1.1828 Y0 I0 J-0.2345
X-0.9483 Y-0.2345 I0.2345 J0
X-0.7138 Y0 I0 J0.2345
G01 X-0.7123
G03 X-0.9483 Y0.236 I-0.236 J0
X-1.1843 Y0 I0 J-0.236
X-0.9483 Y-0.236 I0.236 J0
X-0.7123 Y0 I0 J0.236
G01 X-0.7108
G03 X-0.9483 Y0.2375 I-0.2375 J0
X-1.1858 Y0 I0 J-0.2375
X-0.9483 Y-0.2375 I0.2375 J0
X-0.7108 Y0 I0 J0.2375
G00 Z1.
M9
G49 Z0 M5
T2 M6
M3 S2500
G00 X-0.2132 Y0.2253
G43 Z1. H0
M9
G00 Z0.72

ect.
ect.....

Thanks for the diagnoses

Regards,
Jim
--- In CAD_CAM_EDM_DRO@y..., "Tim Goldstein" <timg@k...> wrote:
Jim,

Lot's of us willing to help, but we can not do it blind. If the
problem
definitely occurs in the first 10 lines for sure, seeing them will
help. If
you are not sure how much of the code processes before the problem
than it
will just be wasting everyone's time.

I am sure you can understand that we can not help you a whole lot
from just
a general description and no specifics. All I can suggest is to
try using a
different G-code viewer program. If it displays correctly in a
couple of
them the problem is likely in the machine and/or software set-up.

As some general suggestions, I like to run the part program
without having a
cutter in the spindle or material on the table if I am not sure
what is
going to happen and especially on a new machine/software/CADCAM
package/etc.. Then unless you are REAL sure you have all the
spindle control
codes and required dwells for the spindle to come up to speed I
would just
turn the spindle on before I start the program. Also I will cut
the part
from wood or foam when I have made any major changes or am using a
brand new
setup. Another thing I do when there are lots of changes is drop
the feed
override down to a real low value and/or single step through the
program.
This will also help if you think you may be experiencing lost
steps. Taking
a machine and software that you are not intimately familiar with
and knowing
what it will do and combining that with G-code that you are not
100% sure of
and running it with metal and nice new cutters it a great recipe
for broken
tooling.

Welcome to the CNC club. It is the fastest way to destroying
tooling that I
have ever experienced. In my case it is virtually always a case of
idiot at
the switch. I have learned that if I can not buy 2 or 3 of the
same cutter
to just not get it at all. Nothing like having a drawer full of
spares to
keep you from breaking an end mill. Having only one of a size
almost seems
to be an invitation to a learning experience.

Tim
[Denver, CO]

----- Original Message -----
Tim,
I would love to but its of a prototype that I've designed and
I'd
rather not take the chance of somebody stealing my idea before I
get
a chance to build it.
Would it help if I posted the first 10 lines or so?Because Im
guessing that's where the problem is. I just dont know enough
about
Code to pinpoint the problem.

Regards,
Jim
Addresses:
FAQ:
FILES:
Post Messages: CAD_CAM_EDM_DRO@y...
OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to
reach it if
you have trouble.


I consider this
to be a
sister site to the CCED group, as many of the same members are
there, for OT
subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY
POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
Re: Pre-wired drive unit

Robert Campbell
 

Ah-ha and a couple of others have plug and play units.

Building your own is not that hard. I could break out my cnc router plans
and give you all the information that you would need to build your own.

If the need is there, I could have a local company build several units.

Bob Campbell
www.campbelldesigns.com

----- Original Message -----
From: "b564htf" <toolingrus@...>
To: <CAD_CAM_EDM_DRO@...>
Sent: Friday, November 01, 2002 6:23 PM
Subject: [CAD_CAM_EDM_DRO] Pre-wired drive unit


Does anyone manufacture a pre-wired drive unit with geckodrives,
power supply, parallel plug etc ? I'd like to be able to just
plug
in the parallel cable and hook up the motors without a lot of
building.


Addresses:
FAQ:
FILES:
Post Messages: CAD_CAM_EDM_DRO@...

Subscribe: CAD_CAM_EDM_DRO-subscribe@...
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@...
List owner: CAD_CAM_EDM_DRO-owner@..., wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this group:

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.


I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner



Your use of Yahoo! Groups is subject to

Pre-wired drive unit

b564htf
 

Does anyone manufacture a pre-wired drive unit with geckodrives,
power supply, parallel plug etc ? I'd like to be able to just
plug
in the parallel cable and hook up the motors without a lot of
building.
Re: Drill press & cross-slide vice

JJ
 

Of you are intent on this approach you will find that cheap drill
presses not only have crappy bearings, but the spindle is not stiff.

The rack and pinion gear that drives the spindle is very very sloppy,
and there is no adjustment.
I pulled out my quill, drilled and tapped two 10-24 holes pointing
toward the quill, one from the front, one from the side. Inserted two
brass screws with nuts to lock them down, and reduced the play some. The
remaining slop comes from the quill spline fitting into the pulley at
the top.

Regards,
JJ

Be Kind, Be Careful, Be Yourself
Re: Has anyone built an SPC display forDigimatic scales?

Chris Baugher
 

On Fri, 1 Nov 2002, alex wrote:

Yes, that's what we did about 10 years ago.
The weekest spot is an overlay - has to be lexan.
Why lexan?

C|
Re: Fw: www.cncsimulator.com

JJ
 

Couldn't find anything on CNC Wizard at the www.cncsimulator.com site,
however, there is info here


Regards,
JJ

Be Kind, Be Careful, Be Yourself

-----Original Message-----
From: k8zre [mailto:rfs@...]
Sent: Thursday, October 31, 2002 11:49 PM
To: CAD_CAM_EDM_DRO@...
Subject: [CAD_CAM_EDM_DRO] Re: Fw: www.cncsimulator.com


Thanx Bill...I found the site and software simulator very
interesting!! Richard in Michigan.

Bill said I could foreward this to any interested
parties...

RayHex

----------
From: cncsimulator.com <cncsim@t...>
To: Multiple recipients of list <emc@n...>
Subject: www.cncsimulator.com
Date: Wednesday, October 30, 2002 11:04 AM



Greetings from cncsimulator.com!

We are happy to present a new product in the MicroTech
line of
CNC software's. The name of the product is CncWizard and
it
is a 3D file, DXF and image converter/ viewer that can do
everything
from viewing CAD and CAM files to create and postprocess
CNC code.
All this in just a few clicks! With CncWizard you can
even convert your
favourite pictures to CNC code! Everything from digital
camera pictures
to scanned logotypes or whatever you want to create. The
program
is available in a Free version as well as in a Pro and
Hobby version.
Download your own copy today! Full 3D mill simulation is
included.

Follow the link from www.cncsimulator.com

If you are not interested in free software for CNC
machining
or just don't want to receive any more information mail
from
cncsimulator.com, please reply to this mail with the
subject "REMOVE" and we will not bother you again.

Best Regards:
The cncsimulator.com staff



Addresses:
FAQ:
FILES:
Post Messages: CAD_CAM_EDM_DRO@...

Subscribe: CAD_CAM_EDM_DRO-subscribe@...
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@...
List owner: CAD_CAM_EDM_DRO-owner@..., wanliker@...
Moderator: jmelson@... timg@...
[Moderator]
URL to this group:

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com
to reach it if you have trouble.

I consider this to be a
sister site to the CCED group, as many of the same members are there,
for OT subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner



Your use of Yahoo! Groups is subject to
Re: Has anyone built an SPC display for Digimatic scales?

Chris Baugher
 

On Fri, 1 Nov 2002, alex wrote:

From what I know, it shouldn't be any difference in wiring of momentary
swiches compare to the membrane.
Not at all. Membrane switches ARE momentary. The reason I wanted to use
membrane switches is that I figured they would be more oil and chip
resistant.

In fact you can make membrane out of momentary by soldering momentary
switches into the rigid PC board, putting spacer and glueing an overlay
on top - you get membrane switch.
The idea of of making my own did occur to me but I didn't think about it
all that much. Now that you mention it you could use some of the wide
flat PCB mount "tact" switches and just stick some kind of plastic
membrane over the top. Hmm, yeah, I think this could work!

C|
Re: Has anyone built an SPC display forDigimatic scales?

alex
 

Yes, that's what we did about 10 years ago.
The weekest spot is an overlay - has to be lexan.
Regards, Alex

----- Original Message -----
From: Chris Baugher <cbaugher_yahoo@...>
To: <CAD_CAM_EDM_DRO@...>
Sent: Friday, November 01, 2002 7:30 PM
Subject: Re: [CAD_CAM_EDM_DRO] Re: Has anyone built an SPC display
forDigimatic scales?


On Fri, 1 Nov 2002, alex wrote:

From what I know, it shouldn't be any difference in wiring of momentary
swiches compare to the membrane.
Not at all. Membrane switches ARE momentary. The reason I wanted to use
membrane switches is that I figured they would be more oil and chip
resistant.

In fact you can make membrane out of momentary by soldering momentary
switches into the rigid PC board, putting spacer and glueing an overlay
on top - you get membrane switch.
The idea of of making my own did occur to me but I didn't think about it
all that much. Now that you mention it you could use some of the wide
flat PCB mount "tact" switches and just stick some kind of plastic
membrane over the top. Hmm, yeah, I think this could work!

C|


Addresses:
FAQ:
FILES:
Post Messages: CAD_CAM_EDM_DRO@...

Subscribe: CAD_CAM_EDM_DRO-subscribe@...
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@...
List owner: CAD_CAM_EDM_DRO-owner@..., wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this group:

OFF Topic POSTS: General Machining
If you wish to post on unlimited OT subjects goto:
aol://5863:126/rec.crafts.metalworking or go thru Google.com to reach it if
you have trouble.


I consider this to be a
sister site to the CCED group, as many of the same members are there, for OT
subjects, that are not allowed on the CCED list.

NOTICE: ALL POSTINGS TO THIS GROUP BECOME PUBLIC DOMAIN BY POSTING THEM.
DON'T POST IF YOU CAN NOT ACCEPT THIS.....NO EXCEPTIONS........
bill
List Mom
List Owner



Your use of Yahoo! Groups is subject to

Re: Keyboard wiring?

John A. McFadden
 

Thanks for the links, both are a little outside my price range. I'll
probably just dig up an old keyboard and out the parts I need, since the
chips inside sell for $40+ seperately.

John
48261 - 48280 of 99862