开云体育

Could it possibly because of stray current running thru the bearings. Try measuring current between the frame and the bearings. Dan

Lasers aren't exactly heavy duty machines, maybe not use the breaker bar when torquing things up? Plenty of 3D printers use plastic bearings & v-grooves, they seem to work fine. Not sure why you'd

"You might want to just replace the deformed plastic bearings with steel bearings." That's what I'm thinking of doing. I'm looking at open builds as a source, any sources you know of off hand?

Scott, all materials do that. Though in steel, it takes much heavier loads. If you need non-metallic bearings you might want to try ceramic bearings. They'll be a little more resistant to plastic

Hi, My name is Scott. I joined this group to ask a couple questions regarding bearings as I ran into an odd scenario over this past month. Bearings deforming while sitting around doing nothing. I

Why not use LinuxCNC? It can take in Cartesian G-code and move generic robots with a variety of kinematics such as a SCARA-type design. Jon

Has anyone created a excel spreadsheet or know of a program that will take XY g code and convert it to polar coordinate g code using G 16. I\m building a scar robotic arm and need such a program. Dan

If you find a program let me know also. Dan

Fusion seems to be the hobbyist choice of free software nowadays and can create G-Code for a lot of different targets. John Dammeyer Sent: October-20-20 2:05 PM To:

My robotics club has a Grizzly G8689 mini mill converted to CNC (G540 and MACH3, d2nc for CAM) and recently acquired an X-Carve unit.? The X-carve has a GRBL (arduino based) controller and needs

Carrying for the "iron" on CNC machines is identical to manual machines. (keep oil on the ways and chips off) CNC machines generally have way covers with wipers at the ends. Maintenance to these

Hi Kpfi & all: One of the things I have found to watch is how much oil isin the coolent. If a way line cracks or breaks the collent will have a much higher oil content before long. Check to

Hi all, I have realized over the years that? no matter how fast and efficient CNC machines is, they’re not infallible. They develop problems and need maintenance just like any other type of machine

Checkout what Gene did: https://www.cnc4pc.com/blog/post/mini-lathe-retrofit-using-mach4-pokeys57e-m16d-and-clearpath-servos Arturo Duncanhttps://cnc4pc.com

Links: ------ [1] /g/CAD-CAM-EDM-DRO/message/99806 [2] /mt/76395221/2448958 [3] /g/CAD-CAM-EDM-DRO/post [4] /g/CAD-CAM-EDM-DRO/ed

Has anyone converted a Boxford me10 lathe to Cnc? ?Looking for info and suppliers. ?Ideas.

New members using tricks like this one do not have free access to post. They may get a post approved when it is strange but seems to be somewhat on topic. They do not get unmoderated until multiple

SPAMER!

Hi, where can I get a direction video/manual of the machine? Thanks! - Dave

Posts to the CAD-CAM-EDM-DRO that seek to drive traffic to any web enterprise rather than actually interact with the list are not welcome. _____ Sent: Friday, July 31, 2020 6:45 AM To: