Keyboard Shortcuts
Likes
Search
mirror locks for a C-14
Good Morning,
?
I have a 10 year old Celestron C-14 SCT that I have recently mounted on a
Software Bisque mount for the purposes of high resolution imaging of the moon
and planets, using a Skyris camera, and CCD imaging of Deep Sky Objects.
?
I am in need of a way to lock down the mirror to prevent image shift during
image acquisition.
?
I’d greatly appreciate any suggestions as to where to purchase an accessory
that will enable me to lock down the mirror after focusing.
?
Thanks very much in advance.
?
|
开云体育Hello,
You can have a look here : Best regards Christian Le 01/10/2015 12:56, ksbtk@... [C14_EdgeHD] a écrit?:
|
开云体育Thank you Samir.
?
Clear
skies,
Kevin ? From: mailto:C14_EdgeHD@...
Sent: Saturday, October 3, 2015 4:41 AM
To: C14_EdgeHD@...
Subject: [C14_EdgeHD] Re: mirror locks for a C-14 ?
?
Takes only a couple of minutes to install. |
开云体育Thank you Christian.
?
Clear
skies,
Kevin ? From: mailto:C14_EdgeHD@...
Sent: Saturday, October 3, 2015 6:08 AM
To: C14_EdgeHD@...
Subject: Re: [C14_EdgeHD] mirror locks for a C-14 ?
?
Hello,
You can have a look here : Best regards Christian Le 01/10/2015 12:56, ksbtk@... [C14_EdgeHD] a écrit :
|
One of my C-14's has a locking collar that I installed when I switched to a carbon fiber tube.? The locking collar helped main mirror stability somewhat, but I still liked the flop stoppers better.? The carbon fiber tube is terrific; the focus stability improved a great deal to the point where in the summer with no more than ten degrees F. temperature change, the focus did not change at all.? I would recommend the flop stoppers alone--my two cents worth.
Andrew |
开云体育Thank you Andrew.
?
Clear
skies,
Kevin ? From: mailto:C14_EdgeHD@...
Sent: Monday, October 5, 2015 3:33 AM
To: C14_EdgeHD@...
Subject: [C14_EdgeHD] Re: mirror locks for a C-14 ?
?
One of my C-14's has a locking collar that I installed when I switched to a
carbon fiber tube.? The locking collar helped main mirror stability
somewhat, but I still liked the flop stoppers better.? The carbon fiber
tube is terrific; the focus stability improved a great deal to the point where
in the summer with no more than ten degrees F. temperature change, the focus did
not change at all.? I would recommend the flop stoppers alone--my two cents
worth. |
My solution with C14 mirror flop in both Hyperstar and cassigrain mode?was to replace the stock moving mirror focuser with a focuser that has no mirror flop. BTW ?no mirror locks are?needed with this new focuser. In addition collimation of the primary/focuser assembly is from the rear on the outside.??
http://s72.photobucket.com/user/miltons_stuff/media/BackViewFocuserWMirror.jpg.html http://s72.photobucket.com/user/miltons_stuff/media/C14MovingMirrorFocuser.jpg.html |