C14 edge corrector housing-screwed to corrector?

Mike Shade All Messages By This Member #15434 I know how to remove the secondary on the C14 edge.? Question is, the secondary housing that goes "through" the corrector, is this screwed together or glued?? I want to remove this housing from the corrector.? I know I need to remove the corrector as there are "pieces" on both sides. Thanks,?
josephrome77 All Messages By This Member #15436 I think you have things wrong. The secondary mirror is keyed and can be removed by unscrewing the outer holding cover. The corrector lens must be removed from the tube assembly to get to the secondary holder from the rear of the corrector plate to be removed from that plate.? There are 6 screws around the outer edge of the corrector plate.? Be careful with the spacers, get the two right in putting things back together.?? This is the only way to tighten up the secondary holder if it starts to slip. Optical alignment should not be much trouble if you mark the side of the corrector plate and place it back to the same location it was removed from.? Joe Rome On Sunday, January 28, 2024 at 11:48:06 AM CST, Mike Shade via groups.io <mshade@...> wrote: I know how to remove the secondary on the C14 edge.? Question is, the secondary housing that goes "through" the corrector, is this screwed together or glued?? I want to remove this housing from the corrector.? I know I need to remove the corrector as there are "pieces" on both sides. Thanks,?

开云体育