开云体育

The JMI Motofocus didn't work with my EdgeHD 14. It just got stuck all the time and could not turn the knob. What works very well is Rigel Systems nFocus For Celestron CPC & HD. It's electrically plug

First, thanks to all for previous answers to my various questions. Is anyone here using a JMI electric focuser for the C14? Any thoughts? Again, thanks in advance for any replies. Thomas - New Mexico

I use a heating tape and a dew shield on my C14HD. However, I've mounted the heater strip on the inside housing of the corrector. There is just enough room to keep it out of the optical view. I'm

I use heating tape with dew-not controller (usually set to maximum) in conjunction with Dew-Shield. Works on most, but the dewiest nights. In those rare cases I use hair drier on low setting. Very

OPT has several options. A heated dew shield is the most aggressive. Using a heater without a shield may not work due to the large size/area of C14 I made a cheap dew shield using a thin, dense

I am seeking recommendations for a dew/frost heating system for my C14 Edge HD. Last year during my Jupiter observation campaign I used a hair drier but it was kind of noisy in the middle of the

The problem with the installation of the Feather Touch mounting on the C14 is a simple one to solve. It seems that the flat area on the rear casting to which the Feather Touch is mounted by three

Jeff, Thanks for that info. I was not aware of your product and novel system. Looks quite interesting. For free advertising you might try putting a hands-on demo of your focuser on youtube.com. Would

Never used it but there were a lot of good comments a few years ago on the CGE list. Regards, Eric Eric Weder Eric.weder@... T +1(403)337-1965 | M +1(403)863-9617 Sent: October 20, 2015 07:19 To:

Hello Thomas, I use a Monlite focuser with step motor for high-resolution imaging : http://www.astrosurf.com/viladrich/astro/instrument/C14/IMG_2209v.jpg It does the job :-) Best regards Christian

Thomas, I don't mean to put in a shameless plug for Optec, but here it is: We've been selling the FastFocus system for several years but it still does not seem very well known. Our system is not

I would like to discuss some basic aspects of T-Point with the CGE Pro mount....any users out there? I've got 24 days left on my evaluation period and I haven't been able to find anyone to answer some

I looked through group messages back to 2013 but didn't see many messages about upgrading from the stock C14 HD focuser. Does anyone have recommendations for a good focuser for a C14 HD that will be

My solution with C14 mirror flop in both Hyperstar and cassigrain mode was to replace the stock moving mirror focuser with a focuser that has no mirror flop. BTW no mirror locks are needed with this

most certainly. Though the "Edge" OTAs contain pre-installed mirror locks.

C14 has mirror flop?

Thank you Andrew. Clear skies, Kevin Sent: Monday, October 5, 2015 3:33 AM To: C14_EdgeHD@... Subject: [C14_EdgeHD] Re: mirror locks for a C-14 One of my C-14's has a locking collar that I

One of my C-14's has a locking collar that I installed when I switched to a carbon fiber tube. The locking collar helped main mirror stability somewhat, but I still liked the flop stoppers better. The

Software Bisque used to make a locking collar, maybe hard to find now: <http://www.bisque.com/sc/forums/p/15753/63316.aspx#63316> -Charlie Lasnier

Thank you Christian. Clear skies, Kevin Sent: Saturday, October 3, 2015 6:08 AM To: C14_EdgeHD@... Subject: Re: [C14_EdgeHD] mirror locks for a C-14 Hello, You can have a look here :