开云体育

Eastbound today at lunchtime at Bowmanville were the trucks and frame
for a new GM locomotive. I presume these are bound to Super Steel
in Schnectady. Anyone verify??

Doug Hately

At 03:12 PM 5/24/1999 -0400, you wrote:

From: Doug Hately <cprnut@...>

Eastbound today at lunchtime at Bowmanville were the trucks and frame
for a new GM locomotive. I presume these are bound to Super Steel
in Schnectady. Anyone verify??

Likely. All the CP parts should be in Ogden by now. You likely saw the same cars I did Saturday night here on 512. There was one upside-down frame and about six trucks on three flats ??



----------------------------------------------------------
Bill Miller - CPR Editor CTC Board Railroads Illustrated
----------------------------------------------------------
ICQ# 9907692
The View From Galt Station
"
Canadian Pacific Railway Diesel Locomotive Roster
"
----------------------------------------------------------

Bill Miller wrote:

From: Bill Miller <bmiller@...>

At 03:12 PM 5/24/1999 -0400, you wrote:

From: Doug Hately <cprnut@...>

Eastbound today at lunchtime at Bowmanville were the trucks and frame
for a new GM locomotive. I presume these are bound to Super Steel
in Schnectady. Anyone verify??

Likely. All the CP parts should be in Ogden by now. You likely saw the same cars I did Saturday night here on 512. There was one upside-down frame and about six trucks on three flats ??

----------------------------------------------------------
Bill Miller - CPR Editor CTC Board Railroads Illustrated
----------------------------------------------------------
ICQ# 9907692
The View From Galt Station
"
Canadian Pacific Railway Diesel Locomotive Roster
"
----------------------------------------------------------

------------------------------------------------------------------------
ONElist: bringing the world together.

Join a new list today!
------------------------------------------------------------------------
C-P-R "Canadian Pacific Railway"

Yes-- these were the same cars as Bill Saw. They were on the head end
and I should have recorded the power (2 SD-40s and a SOO SD-60).
On another note, I see those SD-60s weigh 3000 lbs less than an SD40-2.
Are they on a longer frame or do they just look like it because the hood
is longer??
Doug Hately