开云体育

Anybody knows for what is " P3 " connector on the new board ?
(2 x 3 pin , female?, located beside left from the12 mHz filter-crystals)

73 , Jens / HB9JOI

2x2 Jens,

Gnd+In and Gnd+Out, add your own filter socket. You will have to disable the stock filter!

Raj

... aha ... that is smart done from Ashar .

Also the Raduino-Board now is mounted on the backside
of the 25 MHz crystal board , not more inside between space
of LCD-Board and 25 MHz board , that means easy plug&play ...
Now also the Raduino can easy replaced without something is to
unscrew screws ...

Thanks , Jens / HB9JOI

+++


-----Ursprüngliche Nachricht-----
From: Raj vu2zap
Sent: Thursday, October 11, 2018 3:25 PM
To: [email protected]
Subject: Re: [BITX20] uBITX new Board V4.0-Rev.C

2x2 Jens,

Gnd+In and Gnd+Out, add your own filter socket. You will have to disable the stock filter!

Raj

At 11/10/2018, you wrote:

Anybody knows for what is " P3 " connector on the new board ?
(2 x 3 pin , female , located beside left from the12 mHz filter-crystals)

73 , Jens / HB9JOI