uBitx final amp Class AB?

K9HZ All Messages By This Member #41317 开云体育 The characteristic curves for different operating voltages are right in the spec sheets for them. ?Its a simple matter to pick the proper curve Vds curve and adjust the bias to the correct operating point given the class of operation. ? Dr.?William J. Schmidt - K9HZ J68HZ 8P6HK ZF2HZ PJ4/K9HZ VP5/K9HZ PJ2/K9HZ ? Owner - Operator Big Signal Ranch – K9ZC Staunton, Illinois ? Owner – Operator Villa Grand Piton - J68HZ Soufriere, St. Lucia W.I. Rent it: email:??bill@... ? toggle quoted message Show quoted text On Feb 5, 2018, at 7:45 PM, Dexter N Muir <dexy@...> wrote: The more I read about these FETs the more they seem to behave like valves/'toobs'. A symmetrical output stage driven anti-phase each side is a form of Class B. If there's a non-linear section at turn-off/on then bias above that towards the linear Class-A. That means a small(ish) 'resting' current at Class AB. I'd go for the 10mA/side 'static' bias. 100mA is operating each side in Class A - very linear but very inefficient (more heat!), fine for the Bitx40 but not the uBitx. Has anyone investigated the 'valve-type' transfer curve(s)? How much bias to get beyond the non-linearity into linear (distortion-free) operation for spectral purity?

开云体育