开云体育

sBitx v2 Real Time Clock - pins

John Seboldt K0JD All Messages By This Member #102606 Just got my sBitx v2, and took courage to open it up. I was going to put in the CR2032 coin battery into the real time clock, per various messages I saw. To my surprise, it was already installed. Fine. But now, I have to be sure I've inserted it properly - I didn't observe very carefully which of the five socket holes correspond with the four plug-in pins (GND, VCC, SDA, SCL) My memory is telling me it goes in the upper four pins of the left row of the socket. Please verify if that's correct before I plug in the power! Photo attached of the alignment I thought was correct (before fully inserting the pins). John Seboldt K0JD Milwaukee, WI 20230526_215228_resized.jpg
Art N2AJO All Messages By This Member #102609 John It can go in ether set of sockets Art.N2AJO toggle quoted message Show quoted text On May 26, 2023, at 23:14, John Seboldt K0JD <k0jd-l@...> wrote: ?Just got my sBitx v2, and took courage to open it up. I was going to put in the CR2032 coin battery into the real time clock, per various messages I saw. To my surprise, it was already installed. Fine. But now, I have to be sure I've inserted it properly - I didn't observe very carefully which of the five socket holes correspond with the four plug-in pins (GND, VCC, SDA, SCL) My memory is telling me it goes in the upper four pins of the left row of the socket. Please verify if that's correct before I plug in the power! Photo attached of the alignment I thought was correct (before fully inserting the pins). John Seboldt K0JD Milwaukee, WI <20230526_215228_resized.jpg>
John Seboldt K0JD All Messages By This Member #102611 That's not the question. The question is: in the upper 4 or the lower 4 of the 5 pins of the socket? toggle quoted message Show quoted text On 5/27/2023 05:30, Art N2AJO wrote: John It can go in ether set of sockets Art.N2AJO On May 26, 2023, at 23:14, John Seboldt K0JD <k0jd-l@...> wrote: ?Just got my sBitx v2, and took courage to open it up. I was going to put in the CR2032 coin battery into the real time clock, per various messages I saw. To my surprise, it was already installed. Fine. But now, I have to be sure I've inserted it properly - I didn't observe very carefully which of the five socket holes correspond with the four plug-in pins (GND, VCC, SDA, SCL) My memory is telling me it goes in the upper four pins of the left row of the socket. Please verify if that's correct before I plug in the power! Photo attached of the alignment I thought was correct (before fully inserting the pins). John Seboldt K0JD Milwaukee, WI <20230526_215228_resized.jpg>
HA3HZ All Messages By This Member #102612 I have 4 pins in the socket. The half-cut holes are not contacts, check the pcb. -- Gyula HA3HZ
HA3HZ All Messages By This Member #102616 When the required 4-pin size is cut from a longer socket, the contact at the half-cut holes cannot be used. Nothing to hold it in place. So don't worry, there should be four, i.e. 4 contacts, and there are exactly that many here. -- Gyula HA3HZ
John Seboldt K0JD All Messages By This Member #102618 开云体育 OK, now looking closely I can see there are only 4 actual pins in the socket, and what looked like the fifth (under poorer light) has no pin in it. False alarm, people! Thanks for guiding my fuzzy brain. John K0JD On 5/27/2023 12:13, HA3HZ wrote: toggle quoted message Show quoted text When the required 4-pin size is cut from a longer socket, the contact at the half-cut holes cannot be used. Nothing to hold it in place. So don't worry, there should be four, i.e. 4 contacts, and there are exactly that many here. -- Gyula HA3HZ
Raj vu2zap Member Profile All Messages By This Member #102637 In mine black wire is ground.. Raj, vu2zap toggle quoted message Show quoted text On 27/05/2023 6:58 PM, John Seboldt K0JD wrote: That's not the question. The question is: in the upper 4 or the lower 4 of the 5 pins of the socket? On 5/27/2023 05:30, Art N2AJO wrote: John It can go in ether set of sockets Art.N2AJO

Previous Topic Next Topic