开云体育

Has anyone configured VSCode to build sbitx? Can you share what you did?

73,
Mark

You can if your doing cross platform compiles.? VSC is really a winders thing.

For Linux (intel/amd) and Rpi 3/4 (ARM)running Raspbian there are many
other choices for an IDE or environment.

Allison
------------------
Please use the forum, offline and private will go to bit bucket.

What IDE would you recommend for the RPi 4? FWIW, VSCode runs well on the 4, particularly if you replace the SD card with a USB SSD. I have figured out all the include paths and can use the code editor to jump around the source files. I just need to figure out the way to configure the compiling and linking.

On what system?

I run linux on everything to Eclipse and straight text editor (xed)
do the job for me.? Ben trying Geany as well.? For Arduino I use
their IDE as its the same on all platforms.

I use a larger uSD but also have a USB to SSD (480gb) if I need space.

Usual work is on my Rpi3B+ HB notebox (homebrew note book?
using PI and all that).? Runs everything.

I have two desktops a Mintbox (amd) and Rpi4D so I can do cross platform?
or native platform work.? I enjoy small.

Allison
------------------
Please use the forum, offline and private will go to bit bucket.

Thanks. I was hoping someone had already done that and was willing to share their file. Also, I think it may be possible to replace the build file with a make file that VSCode’s CMake extension can run directly.