¿ªÔÆÌåÓý

  1. BITX20
  2. Topics

raduino_v1.09 with RIT (SPLIT) functionality

 

I've just released raduino_v1.09, download it from

New in this release:

  • added RIT (SPLIT) functionality. This requires a PTT sense line connected to pin A0 (black wire)
    (see for wiring instructions)
  • simplified tuning range setting in SETTINGS menu
  • less frequent EEPROM writes so that EEPROM will last longer

Before updating please carefully read the updated user instructions at


73, Allard PE1NWL
 

I respect you that you make new version always and release to us.

so I wish to add my idea.

I have idea about PTT signal.

I had though that raduino recevice ptt signal from ptt switch directly.

and output ptt signal from raduino to transceiver board.

I think It's more simple to use and applicate for other things, isn't it?
Engineer
 

¿ªÔÆÌåÓý

Yes it could be used as a vox function ?if analog from the mic circuit is sampled?

Sent from my iPhone

On 30 Apr 2017, at 03:13, Yeonghwan Jun <ds5siz@...> wrote:

I respect you that you make new version always and release to us.

so I wish to add my idea.

I have idea about PTT signal.

I had though that raduino recevice ptt signal from ptt switch directly.

and output ptt signal from raduino to transceiver board.

I think It's more simple to use and applicate for other things, isn't it?
 

Thanks for your suggestions.
RX_TX signal from the Raduino to the BITX40 board will be implemented in
the next version.

Of course it is possible to use the PTT signal directly from the PTT
switch. But I choosed to use the regulator output instead, because it
will leave the current PTT circuit intact.

Because there may be users who use the BITX40 for digital modes, etc. So
if they drive the PTT from an external device or PC it will still work
without having to change the existing setup.

73, Allard PE1NWL

On Sun, April 30, 2017 08:00, Engineer wrote:
Yes it could be used as a vox function if analog from the mic circuit
is
sampled
Sent from my iPhone
On 30 Apr 2017, at 03:13, Yeonghwan Jun <ds5siz@...> wrote: I
respect you that you make new version always and release to us. so I
wish to add my idea.
I have idea about PTT signal.
I had though that raduino recevice ptt signal from ptt switch directly.
and output ptt signal from raduino to transceiver board.
I think It's more simple to use and applicate for other things, isn't it?
 

Thank you for all your work on this. ?I plan on implementing your sketch soon and am excited about all the features you have added to the BitX40. ?

If I could make a request - can you add an S-meter to the sketch.?

Thanks

Tim
 

Thanks again Allard for fine program !


I could not find the sketch on the address ? (Error 404)


Ingvar
 

Without the dot after the address it worked.


All ok so far.


Ingvar
 

Sorry, there was an extra dot "." at the end of the URL.
Please try again without the dot:



73, Allard PE1NWL

On Mon, May 1, 2017 10:28, bengt-ingvar.andersson@... wrote:
Thanks again Allard for fine program !

I could not find the sketch on the address ? (Error 404)

Ingvar
electronic design
 

Hi Allard,

Is it possible to save the range (from the menu) when power off?

Thanks!

73! Adi
YO2LIW




On Monday, May 1, 2017 11:52 AM, Allard PE1NWL <pe1nwl@...> wrote:


Sorry, there was an extra dot "." at the end of the URL.
Please try again without the dot:



73, Allard PE1NWL


On Mon, May 1, 2017 10:28, bengt-ingvar.andersson@... wrote:
> Thanks again Allard for fine program !
>
> I could not find the sketch on the address ? (Error 404)
>
> Ingvar
>
 

Hi Adi,

When you set the tuning range via the menu it is saved to EEPROM and
retrieved during power up.

73, Allard PE1NWL

On Tue, May 2, 2017 11:28, electronic design via Groups.Io wrote:
Hi Allard,
Is it possible to save the range (from the menu) when power off?
Thanks!
73! AdiYO2LIW



On Monday, May 1, 2017 11:52 AM, Allard PE1NWL <pe1nwl@...>
wrote:


Sorry, there was an extra dot "." at the end of the URL.
Please try again without the dot:



73, Allard PE1NWL

On Mon, May 1, 2017 10:28, bengt-ingvar.andersson@... wrote:
Thanks again Allard for fine program !

I could not find the sketch on the address ? (Error 404)

Ingvar

1 - 10 of 10