¿ªÔÆÌåÓý

  1. BITX20
  2. Topics

Quality speaker mic with minimal modding

 

Does anyone know of a decent quality speaker mic that does not require a lot of modification to use? ?I would like something that is a step or two up from the baofang mics. ?I want my radio to sound good and I would like my voice to come out better on the other side.

I am fine with installing a jack for the speaker mic in the enclosure.

Thanks in advance.
 

Has anyone tried this one?:

https://www.banggood.com/Hand-Microphone-8Pin-for-ICOM-HM36-HM-3628-IC-718-IC-775-IC-72007600I-with-Track-p-985820.html?rmmds=search
philip yates
 

Thats the mic I use, have tried it with the supplied insert that come with the Bitx, no difference.

Phil - G7BZD

On Wed, Jun 7, 2017 at 7:51 PM, <davidzdeb@...> wrote:
Has anyone tried this one?:
 

Thanks for the reply Phil. ?So you tried both the mike as is and with the bitx supplied mic element? And you saw no difference between the two? ?

Was the wiring of the jack to the bitx40 straight forward?
Cesar
 

But this is a dinamic microfono right? I guess it will get too much power as the board is designed to put volts on a electret mic...
nice mic for the price anyway?
philip yates
 

PTT connection straight onto the PTT as normal, and the mic element is an electret, have tried the supplied Bitx element and can tell no difference.
am using a standard 8 pin plug/socket so may decide to connect the up/don to the tuning ? but not sure yet.

Phil - G7BZD

On Thu, Jun 8, 2017 at 7:55 AM, Cesar <Cesarleon@...> wrote:
But this is a dinamic microfono right? I guess it will get too much power as the board is designed to put volts on a electret mic...
nice mic for the price anyway?


1 - 6 of 6