Just got my new board yesterday install it today double checked all connections. I had taken pictures of the old before so I had good references back. Hooked everything up turn the power on and nothing. ?no display. When I turn off I hear slight noise so I know there’s power in the circuit

could it be a bad Sim in the RPi? ? corrupted possibly??

Addendum. Sbitx v2. Board # 0409

I’ve got 5 V going into the RPI. But nothing is being displayed ?so I’m pretty sure the main board is OK. Is the SD card unique to the RPI/Main board? HF signals is indicating that is the case. They said I got a new SD card which I did not get hopefully that’s all it is

?I did not get a new SD card with the board and HF signals is saying I should have. At least they can email me the files

The next email I got said I should replace the raspberry pi. This infuriates me because I bought a complete unit not a kit. Their defective motherboard has caused the issues with the rpi.

Well they sent me a link to download the new Files guess what it fails on two different computers it times out I cannot get it so I tried on my iPhone I got the file but guess what when it tries to extract it fails with an unknown error.

Carl
do you have a call sign
Can you tell me what you bought?
complete device or boxed device without RPi or an assembled panel?
You are raging here on the net, while ignoring any helper.
If you want to download the contents of the SD card, the iPad is not enough for that, I'm just telling you.
--
Gyula HA3HZ

开云体育

KF0ARU. ?I bought a finished unit. Not a kit

I understand now. You need to send a message to the seller's support@... address, the solution is there.
If you want to download the nearly 3GB file, you can only do so with a browser or download manager that is capable of continuing the interrupted download.
For example, I use IDM integrated in the browser.
But there are several options.
Depending on the operating system, you then unzip this 3GB file and copy it to the SD card as an image.
Since 32GB turns out to be small in many cases, it is advisable to copy it to a 64GB and high-quality card.
I hope this helps.
--
Gyula HA3HZ

link with the latest version:?
--
Gyula HA3HZ

开云体育

I have notified hf dignal support ?of the inability to download ( nothing via mac and a windows pc).?

The download is up to you.
Anyone can download it if you know the link and have a downloader that can continue to download after interruption.
The link is a drive.google link available.
Next to the device, you received a note on measurement results in the box.
So since May you have received this, who ordered a complete device.
You only not received a CR2032 battery because it is not accepted by the supplier (hazardous substance).
If you have a complete device, it must also include the SD Card.
I bought it without RPi, and I got the SD Card in a separate bag.
Look at the box. You may have fallen out and you will find it below.
--
Gyula HA3HZ

I just (09:50 CEST) tried out Gyula's download link:
It worked seamlessly without any interruptions via a 100Mbit/s VDSL internet line by "Deutsche Telekom" and took approx. 7 minutes on an Android Smartphone.
Download of a 2.7GB RAR-file with a 29.7GB image:



It does not seem like a problem on the hfsignals side.

BTW: as far as I remember you should add ".img" to the file name, to be able to use the raspberry imaging tool.?
--
73, Joerg - DB2OO

I finally got a new RPI installed and installed the RPI iOS. The link that HF signals gave me for the sbitx_iimage.rar extracts to be identical to the rpi iOS
can you provide me a link to a valid SBITX image file
tools I am using Belina etcher on a Mac air book running the latest version of Sonoma.?

Carl,
That's because it boots into the RasPi OS. It has the sbitx info in the 2nd partition which is not readable by Windows.
Put it in the Pi and boot up the radio.

Hank W6IR