开云体育

Larger Nextion Display

Dale Parfitt #78771 Will the Nextion displays plug directly into the Raduino board- that is, electrically pin for pin? I understand the need for programming the display- just asking about the plug/socket. Tnx Dale W4OP
Reed N All Messages By This Member #78772 Dale, Are you considering upgrading from the v6's screen, or an existing nextion build? The v6's screen is not a nextion screen, and is not pin compatible. If you have an existing nextion display, I suspect, but cannot say with certainty, that they'll use the same uart port. Reed
Evan Hand All Messages By This Member #78773 Here is a page that I found on how to connect the Nextion display to a v6 uBITX with the KD8CEC firmware installed and the tft file for the correct display installed in the Nextion display. CAUTION! I do not have a v6.? I have a v4 and a v5 and have added Nextion displays to both.? As far as I can tell the wiring and software should work. 73 Evan AC9TU
Dale Parfitt #78775 开云体育 Upgrading from the standard V6 2.8 screen. I understand having to program the micro(?) disc. Tnx, Dale W4OP ? toggle quoted message Show quoted text From: [email protected] [mailto:[email protected]] On Behalf Of Reed N Sent: Monday, May 11, 2020 3:26 PM To: [email protected] Subject: Re: [BITX20] Larger Nextion Display ? Dale, Are you considering upgrading from the v6's screen, or an existing nextion build? The v6's screen is not a nextion screen, and is not pin compatible. If you have an existing nextion display, I suspect, but cannot say with certainty, that they'll use the same uart port. Reed
Dale Parfitt #78776 开云体育 Tnx Evan, Dale ? toggle quoted message Show quoted text From: [email protected] [mailto:[email protected]] On Behalf Of Evan Hand Sent: Monday, May 11, 2020 3:31 PM To: [email protected] Subject: Re: [BITX20] Larger Nextion Display ? Here is a page that I found on how to connect the Nextion display to a v6 uBITX with the KD8CEC firmware installed and the tft file for the correct display installed in the Nextion display. CAUTION! I do not have a v6.? I have a v4 and a v5 and have added Nextion displays to both.? As far as I can tell the wiring and software should work. 73 Evan AC9TU
Steve/G4MJW All Messages By This Member #78777 Yes they do but they only use 4 connection and 2 are + & - 5V. Very easy? wire up and put the .tft file onto a uSD Card and pop into the SD Card socket on the back of the display. I've just done it for a 4.3" Display and it looks good. Steve/G4MJW? toggle quoted message Show quoted text On Mon, 11 May 2020, 19:47 Dale Parfitt, <PARINC1@...> wrote: Will the Nextion displays plug directly into the Raduino board- that is, electrically pin for pin? I understand the need for programming the display- just asking about the plug/socket. Tnx Dale W4OP
Dale Parfitt #78780 开云体育 Thanks to all, ? Dale W4OP ? toggle quoted message Show quoted text From: [email protected] [mailto:[email protected]] On Behalf Of Steve Carey Sent: Monday, May 11, 2020 3:42 PM To: [email protected] Subject: Re: [BITX20] Larger Nextion Display ? Yes they do but they only use 4 connection and 2 are + & - 5V. Very easy? wire up and put the .tft file onto a uSD Card and pop into the SD Card socket on the back of the display. I've just done it for a 4.3" Display and it looks good. ? Steve/G4MJW? ? On Mon, 11 May 2020, 19:47 Dale Parfitt, <PARINC1@...> wrote: Will the Nextion displays plug directly into the Raduino board- that is, electrically pin for pin? I understand the need for programming the display- just asking about the plug/socket. Tnx Dale W4OP

Previous Topic Next Topic