Getting much closer to hearing something
|
His IF gain is too low to hear anything!
toggle quoted message
Show quoted text
On 25/02/2024 9:23 AM, Steve Beckman wrote:
Tony - you have SPLIT set to ON. Please tap it until it says OFF and try tuning around then. |
|
I had a senior moment looking at those pictures and thought you were up around?14800, but that isn't an 8, it's a 0. So look at the waterfall where 14020 is located. See the dots and dashes flowing up the waterfall? That's a CW signal! There's a weaker one around 14018 as well. Turn up that IF and you might hear a LOT more! So definitely raise the IF to 70-ish. That's the RF gain. (No idea why it's called IF instead of RF Gain, but I'm sure there's a good reason.) -=-=-=-=-=-=-=-=- 73, Gwen, NG3P On Sat, Feb 24, 2024 at 11:39?PM Steve Beckman <n3sb@...> wrote: Raj - you are right. A more appropriate IF Gain setting for frequencies near 14 MHz is around 70. |
Raj vu2zap
Gwen Patton