Firmware upgrade suggestions

Tom Sevart All Messages By This Member #106533 Hi all, I'm looking to upgrade the firmware on my uBitX v.6. I don't mind the UI but as a CW operator I constantly have issues with the CW keyer, which seems to want to add extra dits or dahs now and then. So I'm looking for an upgrade with a good CW keyer. -- Tom Sevart N2UHC St. Paul, KS
JJ - W9JES All Messages By This Member #106544 What version are you using currently? I added a modified UI of N8ME firmware in the file section. I've since upgraded to a nextion display and KD8CEC firmware. You can give either of those a try.
David Barber All Messages By This Member #106549 开云体育 Tom: The following comment comes from a previous message by Evan?AC9TU. I would look at the two firmware options that resolve most, if not all, of the issues with the stock software.? The first is from Reed N: The second is from N8ME in the files section: /g/BITX20/message/90242 Both have been reported as greatly improving the performance of the stock v6 without any hardware changes.?? 73 Dave WD8AJQ SE? toggle quoted message Show quoted text On Dec 10, 2023, at 11:13?AM, Tom Sevart <tmsevart@...> wrote: ?Hi all, I'm looking to upgrade the firmware on my uBitX v.6. ?I don't mind the UI but as a CW operator I constantly have issues with the CW keyer, which seems to want to add extra dits or dahs now and then. ?So I'm looking for an upgrade with a good CW keyer. -- Tom Sevart N2UHC St. Paul, KS

开云体育