¿ªÔÆÌåÓý

  1. BITX20
  2. Topics

Error in Sound Input #sBITX_v3

 

Peter,

Since the JS8Call is installed, I thought I'd try it. I do not understand how it works yet, but the outgoing level of my broadcast is the same as the digital mode broadcast level, ie I left the FT8 DRIVE level 70 on 14MHz and my outgoing signal is 20W RF out.
I don't see how to decode because I only accidentally saw a message, but I didn't understand how it came here.
Freki is 14078.000, if I set the display there, I see it, then there is no one. If I go up, there are sounds and signs, but I don't understand why it doesn't decode.

--
Gyula HA3HZ
 

Peter,

I had my first JS8Call qso with Eddy ON5UQ.
You have to get used to how life works here :-)
I was able to adjust the start screen so that I can see it in action.
For this, I needed the larger screen so that I could adjust what I needed.
I hope you also manage to solve the outgoing level.
--
Gyula HA3HZ
 

On Wed, Mar 6, 2024 at 01:02 AM, HA3HZ wrote:
I had my first JS8Call qso with Eddy ON5UQ
You have made a start with JS8Call, excellent.?

I have been using JS8Call since 2019 to make many QSOs.? It's a very good mode with low power.? The program has some nice features.??

I will keep looking for solutions to the audio adjustments.

Thank you for your help, and good DX!
?--
Pete VK3PYE
 

A bug phenomenon is still present in sBitx.
And this is 'Error in Sound Input'. When the settings I use happen rarely, I either turn off the RPi immediately and restart it or, as in this case, I click on the pop-up error, it disappears for a while, but it appears again at the start of the next broadcast.
I mention the present case because of a dx station, because I had to call now, otherwise I won't see it later. In the end, I managed to qso, so my dxcc/cfm ratio is also quietly increasing. The pictures show the data of the device, the antenna is still a vertically fed and obliquely installed loop antenna, which I sized for 7 MHz. I have been using this device and antenna since mid-November 2023. Since we are close to qrp performance, it should be used as such. We often have to check our transmission frequency to make sure it's empty, because that's the only way to use it effectively.
--
Gyula HA3HZ
?
?
?

21 - 24 of 24