开云体育

Sold what I thought was a surplus Raduino and now I find out that I needed it. This is for a v5 board. What are my options? ?With chip shortage there seems to be fewer ones. HF signals list one but not clear if it fits a v5. Some folks from China offer a v5. And if I had a v6 would probably go the teensy route. Suggestions?

73
Mark
AJ6CU

Mark - I would check with HFSignals.? I was able to get a new Raduino for one of my BITX40 radios.

73,

Justin B.
KI5GKD

Mark,
I have any PCB.
/g/BITX20/topic/raduino32_v6_11_pcb_available/91472484?p=,,,20,0,0,0::recentpostdate/sticky,,,20,2,20,91472484,previd%3D1655304985448260336,nextid%3D1654080939163334478&previd=1655304985448260336&nextid=1654080939163334478

搁补尘ó苍?

Ramon,

Thanks, Are these "bare boards" or do they have some of the chips soldered on?

73
Mark
AJ6CU

Mark,?
the board has all the SMD components soldered at the factory. Only the connectors and the 7805 regulator need to be soldered.
搁补尘ó苍?

Lou,?
It works with the V5, although the wiring has to be modified a bit (Keyer an PTT pins). It's simple.
搁补尘ó苍?