|
Has anyone written code to use TFT display i keep searching but not finding anything. ?If someone could point me in the correct direction that would be great thx.
|
Steve ,
There are few in the works.
W8TEE , Jack is working on some code.
He has the display done. So many are waiting for his code.? A very talented coder.
There are some Russian and other hams from Japan with some . Both are on youtube
PD8W also has developed some code.
Nice display. Unfortunately he has not finished the code and cant seem to contact him.
I played with it and the display on the tft was very nice and the code for display works fine with my tft's and atmega2560.
Unfortunately the buttons to control other options need work.
Joe
VE1BWV
On Fri, Jun 30, 2017, 3:09 PM Steve Greer < km4ous@...> wrote: Has anyone written code to use TFT display i keep searching but not finding anything.? If someone could point me in the correct direction that would be great thx.
|
I bought 2 nice displays on eBay. 3.2"
2-3 days Fun Invested.? Very complicated and confusing.? Parts of
Demos worked others did not.
I could not even understand people trying to help me on the
arduino forum.
Buy what Jack says "MCUFriend" Library compatible, that is what
he is using.? Make sure you get pin arrangement he is using.
I DIDN'T! Sad........
Mike, WA6ISP
On 6/30/2017 11:24 AM, Joe wrote:
Steve ,
There are few in the works.
W8TEE , Jack is working on some code.
He has the display done. So many are waiting for his code.? A
very talented coder.
There are some Russian and other hams from Japan with
some . Both are on youtube
PD8W also has developed some code.
Nice display. Unfortunately he has not finished the code and
cant seem to contact him.
I played with it and the display on the tft was very nice and
the code for display works fine with my tft's and atmega2560.
Unfortunately the buttons to control other options need work.
Joe
VE1BWV
On Fri, Jun 30, 2017, 3:09 PM Steve Greer < km4ous@...>
wrote:
Has anyone
written code to use TFT display i keep searching but not
finding anything.? If someone could point me in the correct
direction that would be great thx.
--
Mike Hagen, WA6ISP
10917 Bryant Street
Yucaipa, Ca. 92399
(909) 918-0058
PayPal ID "MotDog@..."
Mike@...
|
I've had some setbacks at home, but am still trying to get things going. I don't really use "buttons" on my display, as I am not using a touch screen at this time. The mcufriend displays should plug right into a standard Mega 2560 or my TFT PCB. I should have the VFO working this weekend. The schematic for my PCB is attached. You'll need the same pinouts for my code to work with the display.
Jack, W8TEE
From: Michael Hagen <motdog@...>
To: [email protected]
Sent: Friday, June 30, 2017 2:52 PM
Subject: Re: [BITX20] Bitx TFT display code
I bought 2 nice displays on eBay. 3.2"
2-3 days Fun Invested.? Very complicated and confusing.? Parts of
Demos worked others did not.
I could not even understand people trying to help me on the
arduino forum.
Buy what Jack says "MCUFriend" Library compatible, that is what
he is using.? Make sure you get pin arrangement he is using.
I DIDN'T! Sad........
Mike, WA6ISP
On 6/30/2017 11:24 AM, Joe wrote:
Steve ,
There are few in the works.
W8TEE , Jack is working on some code.
He has the display done. So many are waiting for his code.? A
very talented coder.
There are some Russian and other hams from Japan with
some . Both are on youtube
PD8W also has developed some code.
Nice display. Unfortunately he has not finished the code and
cant seem to contact him.
I played with it and the display on the tft was very nice and
the code for display works fine with my tft's and atmega2560.
Unfortunately the buttons to control other options need work.
Joe
VE1BWV
On Fri, Jun 30, 2017, 3:09 PM Steve Greer < km4ous@...>
wrote:
Has anyone
written code to use TFT display i keep searching but not
finding anything.? If someone could point me in the correct
direction that would be great thx.
--
Mike Hagen, WA6ISP
10917 Bryant Street
Yucaipa, Ca. 92399
(909) 918-0058
PayPal ID "MotDog@..."
Mike@...
|
Jack
I bought TFTs with the double connector on the
Right Hand side, to fit Mega 2560.
But some use the single pin headers across the
top and botom (Horz) of the Mega 2560?
I got confused over Mega 2560 compatibility?
Mike, WA6ISP
On 6/30/2017 11:59 AM, Jack Purdum via
Groups.Io wrote:
I've
had some setbacks at home, but am still trying to get things
going. I don't really use "buttons" on my display, as I am
not using a touch screen at this time. The mcufriend
displays should plug right into a standard Mega 2560 or my
TFT PCB. I should have the VFO working this weekend. The
schematic for my PCB is attached. You'll need the same
pinouts for my code to work with the display.
Jack,
W8TEE
I bought 2
nice displays on eBay. 3.2"
2-3 days
Fun Invested.? Very complicated and confusing.?
Parts of Demos worked others did not.
I could
not even understand people trying to help me on
the arduino forum.
Buy what
Jack says "MCUFriend" Library compatible, that is
what he is using.? Make sure you get pin
arrangement he is using.
I DIDN'T!
Sad........
Mike,
WA6ISP
On 6/30/2017
11:24 AM, Joe wrote:
Steve ,
There are
few in the works.
W8TEE , Jack is working on some code.
He has the display done. So many are waiting for
his code.? A very talented coder.
There are
some Russian and other hams from Japan with some
. Both are on youtube
PD8W also
has developed some code.
Nice display. Unfortunately he has not finished
the code and cant seem to contact him.
I played with it and the display on the tft was
very nice and the code for display works fine
with my tft's and atmega2560.
Unfortunately the buttons to control other
options need work.
Joe
VE1BWV
On Fri,
Jun 30, 2017, 3:09 PM Steve Greer < km4ous@...>
wrote:
Has
anyone written code to use TFT display i keep
searching but not finding anything.? If
someone could point me in the correct
direction that would be great thx.
--
Mike Hagen, WA6ISP
10917 Bryant Street
Yucaipa, Ca. 92399
(909) 918-0058
PayPal ID "MotDog@..."
Mike@...
--
Mike Hagen, WA6ISP
10917 Bryant Street
Yucaipa, Ca. 92399
(909) 918-0058
PayPal ID "MotDog@..."
Mike@...
|
My PCB uses the Mega 2560 Pro Mini because of its smaller footprint. I buy from Wideenm991 on eBay. The DDS module is a type II, as shown here:
but are getting hard to find. I can't find the guy who made an adapter board for a Type I to a Type II board (K5ESS??). He sells the adapter for about $2. My board looks like this:
You can see where the DDS and Mega boards go. The advantage of the board is that most of the I/O pins are brought out at the bottom and top of the baord for additional hacking. With the schematic I posted earlier today you should be able to "fit" things on the board.
Jack, W8TEE
From: Michael Hagen <motdog@...>
To: [email protected]
Sent: Friday, June 30, 2017 3:20 PM
Subject: Re: [BITX20] Bitx TFT display code
Jack
I bought TFTs with the double connector on the
Right Hand side, to fit Mega 2560.
But some use the single pin headers across the
top and botom (Horz) of the Mega 2560?
I got confused over Mega 2560 compatibility?
Mike, WA6ISP
On 6/30/2017 11:59 AM, Jack Purdum via
Groups.Io wrote:
I've
had some setbacks at home, but am still trying to get things
going. I don't really use "buttons" on my display, as I am
not using a touch screen at this time. The mcufriend
displays should plug right into a standard Mega 2560 or my
TFT PCB. I should have the VFO working this weekend. The
schematic for my PCB is attached. You'll need the same
pinouts for my code to work with the display.
Jack,
W8TEE
I bought 2
nice displays on eBay. 3.2"
2-3 days
Fun Invested.? Very complicated and confusing.?
Parts of Demos worked others did not.
I could
not even understand people trying to help me on
the arduino forum.
Buy what
Jack says "MCUFriend" Library compatible, that is
what he is using.? Make sure you get pin
arrangement he is using.
I DIDN'T!
Sad........
Mike,
WA6ISP
On 6/30/2017
11:24 AM, Joe wrote:
Steve ,
There are
few in the works.
W8TEE , Jack is working on some code.
He has the display done. So many are waiting for
his code.? A very talented coder.
There are
some Russian and other hams from Japan with some
. Both are on youtube
PD8W also
has developed some code.
Nice display. Unfortunately he has not finished
the code and cant seem to contact him.
I played with it and the display on the tft was
very nice and the code for display works fine
with my tft's and atmega2560.
Unfortunately the buttons to control other
options need work.
Joe
VE1BWV
On Fri,
Jun 30, 2017, 3:09 PM Steve Greer < km4ous@...>
wrote:
Has
anyone written code to use TFT display i keep
searching but not finding anything.? If
someone could point me in the correct
direction that would be great thx.
--
Mike Hagen, WA6ISP
10917 Bryant Street
Yucaipa, Ca. 92399
(909) 918-0058
PayPal ID "MotDog@..."
Mike@...
--
Mike Hagen, WA6ISP
10917 Bryant Street
Yucaipa, Ca. 92399
(909) 918-0058
PayPal ID "MotDog@..."
Mike@...
|
In searching for tft displays, i noticed there were serial and parallel. The ones with connectors on the top and bottom are generally pin compatible with uno and atmega2560.? I have several of these and the 3.5" just plugged and Jacks display worked great.. These were mci friends type marked on the board. My other tft's were 2.8 inch.
One i had to change some text size for the display to look correct. The other 2.8 from elegoo was also mcufriend, but Jacks display code worked with no changes.
His code is able to identify several tft drivers and select the correct one.. Very cool.
The serial type tft usually have single set of pins - 8-10 pins. The usually say spi or serial in the description.
I see that some Japanese and Russian hams use these type.
Looking forward to Jack"s next code run...
Joe
VE1BWV
On Fri, Jun 30, 2017, 4:57 PM Jack Purdum via Groups.Io <econjack= [email protected]> wrote: My PCB uses the Mega 2560 Pro Mini because of its smaller footprint. I buy from Wideenm991 on eBay. The DDS module is a type II, as shown here:
but are getting hard to find. I can't find the guy who made an adapter board for a Type I to a Type II board (K5ESS??). He sells the adapter for about $2. My board looks like this:
You can see where the DDS and Mega boards go. The advantage of the board is that most of the I/O pins are brought out at the bottom and top of the baord for additional hacking. With the schematic I posted earlier today you should be able to "fit" things on the board.
Jack, W8TEE
Sent: Friday, June 30, 2017 3:20 PM
Subject: Re: [BITX20] Bitx TFT display code
Jack
I bought TFTs with the double connector on the
Right Hand side, to fit Mega 2560.
But some use the single pin headers across the
top and botom (Horz) of the Mega 2560?
I got confused over Mega 2560 compatibility?
Mike, WA6ISP
On 6/30/2017 11:59 AM, Jack Purdum via
Groups.Io wrote:
I've
had some setbacks at home, but am still trying to get things
going. I don't really use "buttons" on my display, as I am
not using a touch screen at this time. The mcufriend
displays should plug right into a standard Mega 2560 or my
TFT PCB. I should have the VFO working this weekend. The
schematic for my PCB is attached. You'll need the same
pinouts for my code to work with the display.
Jack,
W8TEE
I bought 2
nice displays on eBay. 3.2"
2-3 days
Fun Invested.? Very complicated and confusing.?
Parts of Demos worked others did not.
I could
not even understand people trying to help me on
the arduino forum.
Buy what
Jack says "MCUFriend" Library compatible, that is
what he is using.? Make sure you get pin
arrangement he is using.
I DIDN'T!
Sad........
Mike,
WA6ISP
On 6/30/2017
11:24 AM, Joe wrote:
Steve ,
There are
few in the works.
W8TEE , Jack is working on some code.
He has the display done. So many are waiting for
his code.? A very talented coder.
There are
some Russian and other hams from Japan with some
. Both are on youtube
PD8W also
has developed some code.
Nice display. Unfortunately he has not finished
the code and cant seem to contact him.
I played with it and the display on the tft was
very nice and the code for display works fine
with my tft's and atmega2560.
Unfortunately the buttons to control other
options need work.
Joe
VE1BWV
On Fri,
Jun 30, 2017, 3:09 PM Steve Greer < km4ous@...>
wrote:
Has
anyone written code to use TFT display i keep
searching but not finding anything.? If
someone could point me in the correct
direction that would be great thx.
--
Mike Hagen, WA6ISP
10917 Bryant Street
Yucaipa, Ca. 92399
(909) 918-0058
PayPal ID "MotDog@..."
Mike@...
--
Mike Hagen, WA6ISP
10917 Bryant Street
Yucaipa, Ca. 92399
(909) 918-0058
PayPal ID "MotDog@..."
Mike@...
|
Please have a look at my blog for TFT touch screen based vfo and bfo. The first version of code should be there soon. Blog is at
73 Vu2spf Bhatnagar
|
All:
I bought a Mega 2560 Pro Mini from RobotDyn and it does NOT fit my PCB.
?
This is too bad, as it sell for about half the price of the one that does fit.
Jack, W8TEE
From: Joe <joeman2116@...>
To: [email protected]
Sent: Friday, June 30, 2017 5:51 PM
Subject: Re: [BITX20] Bitx TFT display code
In searching for tft displays, i noticed there were serial and parallel. The ones with connectors on the top and bottom are generally pin compatible with uno and atmega2560.? I have several of these and the 3.5" just plugged and Jacks display worked great.. These were mci friends type marked on the board. My other tft's were 2.8 inch.
One i had to change some text size for the display to look correct. The other 2.8 from elegoo was also mcufriend, but Jacks display code worked with no changes.
His code is able to identify several tft drivers and select the correct one.. Very cool.
The serial type tft usually have single set of pins - 8-10 pins. The usually say spi or serial in the description.
I see that some Japanese and Russian hams use these type.
Looking forward to Jack"s next code run...
Joe
VE1BWV
On Fri, Jun 30, 2017, 4:57 PM Jack Purdum via Groups.Io <econjack= [email protected]> wrote: My PCB uses the Mega 2560 Pro Mini because of its smaller footprint. I buy from Wideenm991 on eBay. The DDS module is a type II, as shown here:
but are getting hard to find. I can't find the guy who made an adapter board for a Type I to a Type II board (K5ESS??). He sells the adapter for about $2. My board looks like this:
You can see where the DDS and Mega boards go. The advantage of the board is that most of the I/O pins are brought out at the bottom and top of the baord for additional hacking. With the schematic I posted earlier today you should be able to "fit" things on the board.
Jack, W8TEE
Sent: Friday, June 30, 2017 3:20 PM
Subject: Re: [BITX20] Bitx TFT display code
Jack
I bought TFTs with the double connector on the
Right Hand side, to fit Mega 2560.
But some use the single pin headers across the
top and botom (Horz) of the Mega 2560?
I got confused over Mega 2560 compatibility?
Mike, WA6ISP
On 6/30/2017 11:59 AM, Jack Purdum via
Groups.Io wrote:
I've
had some setbacks at home, but am still trying to get things
going. I don't really use "buttons" on my display, as I am
not using a touch screen at this time. The mcufriend
displays should plug right into a standard Mega 2560 or my
TFT PCB. I should have the VFO working this weekend. The
schematic for my PCB is attached. You'll need the same
pinouts for my code to work with the display.
Jack,
W8TEE
I bought 2
nice displays on eBay. 3.2"
2-3 days
Fun Invested.? Very complicated and confusing.?
Parts of Demos worked others did not.
I could
not even understand people trying to help me on
the arduino forum.
Buy what
Jack says "MCUFriend" Library compatible, that is
what he is using.? Make sure you get pin
arrangement he is using.
I DIDN'T!
Sad........
Mike,
WA6ISP
On 6/30/2017
11:24 AM, Joe wrote:
Steve ,
There are
few in the works.
W8TEE , Jack is working on some code.
He has the display done. So many are waiting for
his code.? A very talented coder.
There are
some Russian and other hams from Japan with some
. Both are on youtube
PD8W also
has developed some code.
Nice display. Unfortunately he has not finished
the code and cant seem to contact him.
I played with it and the display on the tft was
very nice and the code for display works fine
with my tft's and atmega2560.
Unfortunately the buttons to control other
options need work.
Joe
VE1BWV
On Fri,
Jun 30, 2017, 3:09 PM Steve Greer < km4ous@...>
wrote:
Has
anyone written code to use TFT display i keep
searching but not finding anything.? If
someone could point me in the correct
direction that would be great thx.
--
Mike Hagen, WA6ISP
10917 Bryant Street
Yucaipa, Ca. 92399
(909) 918-0058
PayPal ID "MotDog@..."
Mike@...
--
Mike Hagen, WA6ISP
10917 Bryant Street
Yucaipa, Ca. 92399
(909) 918-0058
PayPal ID "MotDog@..."
Mike@...
|
Wow!, The features look great.... cant wait to try it out. Your website on the Colour TFT display and si5351 looks very interesting.
I like the idea of using the si5351
Thanks for the info Joe VE1BWV
On Fri, Jun 30, 2017 at 10:44 PM, SP Bhatnagar <vu2spf@...> wrote: Please have a look at my blog for TFT touch screen based vfo and bfo. The first version of code should be there soon. Blog is at
73 Vu2spf Bhatnagar
|
Do you have a hardware list for your project.. I did not see a listing on your site I want of make sure I have the correct type of tft or I need to order one..
Joe VE1BWV
On Fri, Jun 30, 2017 at 10:44 PM, SP Bhatnagar <vu2spf@...> wrote: Please have a look at my blog for TFT touch screen based vfo and bfo. The first version of code should be there soon. Blog is at
73 Vu2spf Bhatnagar
|
I came across your site and was looking all over to find some sample code but no joy. ?I'm very interested I will keep checking back.
|
El 30/06/17 a las 14:24, Joe escribi¨®:
I played with it and the display on the tft was very nice and the code for display works fine with my tft's and atmega2560.
Unfortunately the buttons to control other options need work.
This may help you: Joe
VE1BWV
73 de Pavel CO7WT
|
SP Bhatnagar